User Manual

4. Press the arrow buttons to select the name of your wireless network and press the OK button. If you
do not see your wireless network's name, you can enter it manually.
Note: To enter the wireless network name manually, select Other SSIDs and press the OK button.
Enter your network name as described in the next step.
5. Enter your wireless password (or network name and then password).
Press the up and down arrow buttons to scroll through characters. Then press the right arrow
button to move to the next character.
To switch between ABC (uppercase), abc (lowercase), or 123 (numbers and symbols), press the
home button.
To delete characters, press the left arrow.
When you finish entering characters, press the OK button.
6. If you want to print a network setup report, press the start button. (Otherwise, press the stop
button.)
7. Press the home button to exit.
Your product should now display a WiFi symbol on the LCD screen.
Note: If the WiFi symbol isn't displayed on the LCD screen, you may have selected the wrong
network name or entered the password incorrectly. Repeat these steps to try again.
Parent topic: Wi-Fi Infrastructure Mode Setup
26