User Manual

Wi-Fi Direct Mode Setup

You can set up your product to communicate directly with your computer or another device without

requiring a wireless router or access point.

1 Epson product

2 Computer with a wireless interface

3 Other wireless device

Your product automatically selects one of these modes to communicate with your computer or device:

Access point mode

If your product is not already connected to a wireless network, it enters access point mode and the

product itself acts as the network access point for up to 4 devices. When operating in this mode, your

product displays an AP connection symbol on the LCD screen.

Peer-to-peer mode

If your product is already connected to a wireless network, it enters peer-to-peer mode and

disconnects from any other networks. This also disables any other product features requiring access

to the Internet. When operating in this mode, your product displays a Direct or D connection symbol

on the LCD screen.

Note: To disconnect a peer-to-peer mode connection, release the connection to your product from

your computer or other device. Your product will reconnect to the previously used network.

Enabling Wi-Fi Direct Mode

Parent topic: Wi-Fi Networking