User Manual

Enabling Wi-Fi Direct Mode

You can enable Wi-Fi Direct mode to allow direct communication between your product and computer or

other devices without a wireless router or access point.

1. Press the home button, if necessary.

2. Press the arrow buttons to select Wi-Fi Setup and press the OK button.

You see this screen:

3. Press the arrow buttons to select Wi-Fi Direct Setup and press the OK button.

4. Press the down arrow button, then press the OK button to change the Wi-Fi Direct password.

Note: If you have already connected devices or computers to your product via Wi-Fi Direct, they will

be disconnected when you change the password.

5. Enter your Wi-Fi Direct password.

Note: Your password must be at least 8 and no more than 22 characters long.