User Manual

7. Use your computer or wireless device to select the Wi-Fi network name (SSID) displayed on the

LCD screen, then enter the password shown.

8. Press the OK button to exit.

You see either an AP or D connection symbol on the LCD screen and should be able to print directly

to your product from your computer or device.

Note: If the AP or D connection symbol is not displayed on the LCD screen, Wi-Fi Direct mode is not

enabled. Repeat these steps to try again.

Parent topic: Wi-Fi Direct Mode Setup

Wi-Fi Protected Setup (WPS)

If your network uses a WPS-enabled wireless router or access point, you can quickly connect your

product to the network using Wi-Fi Protected Setup (WPS).

Note: To check if your router is WPS-enabled, look for a button labeled WPS on your router or access

point. If there is no hardware button, there may be a virtual WPS button in the software for the device.

Check your network product documentation for details.

Using WPS to Connect to a Network

Parent topic: Wi-Fi Networking

Using WPS to Connect to a Network

If you have a WPS-enabled router or access point, you can use Wi-Fi Protected Setup (WPS) to connect

your product to the network.

1. Press the WPS button on your router.

2. On the product, press the home button, if necessary.