User manual

Code Problem Solution
102 Collate printing has failed due to a lack of
available memory.
Clear downloaded fonts from Clear Internal Memory Data or
reduce the size of the print job.
If you do not want to reduce the size of the print job, print one
copy at a time.
103 Printing quality has been lowered due to a lack of
available memory.
If the quality of the printout is not acceptable, try simplifying the
page by reducing the number of graphics or the number and size
of the fonts.
104 Reverse printing has failed due to a lack of
available memory.
Clear Font data.
& “System Administration Settings” on page 102
Reduce the data size of the print job.
106 Cannot print from the computer due to the
access control settings.
Contact your printer administrator.
107 User authentication failed. The job has been
canceled.
Contact your printer administrator.
108 Confidential job data was deleted when the
product was turned off.
-
109 The received fax was already deleted. -
110 The job was printed on one side only because the
paper loaded does not support double sided
printing.
-
111 Short of available memory. Reduce the size of the print job.
201 The memory is full.
& “Memory full error occurs” on page 179
202 The line was disconnected by the recipient
machine.
Wait for a moment, and then try again.
203 The product cannot detect the dial tone. Check the phone line is connected correctly.
& “Connecting to a Phone Line” on page 74
Find more solutions in the following section.
& ““No dial tone detected.” error occurs” on page 178
204 The recipient machine is busy. Wait for a moment, and then try again.
205 The recipient machine does not answer.
206 The phone cable is incorrectly connected to the
LINE and EXT port of the product.
Connect the product to the phone line correctly.
& “Connecting to a Phone Line” on page 74
207 The product is not connected to the phone line.
208 The fax could not be sent to some of the specified
recipients.
Print a Fax Log from Fax Report to check which recipients failed
to receive the fax.
& “Printing a fax report” on page 93
When Save Failure Data is set to On, you can resend a fax from Job
Monitor in Status Menu.
User’s Guide
Error Indicators
150