User manual

4. Make the following settings.
❏ Document Type: Select the type of the original you want to scan.
❏ Image Type: Select the color type of the image you want to scan.
Although this is automatically selected by the Document Type setting, you can change the setting.
❏ Destination: Select the resolution of the image you want to scan.
If you select Other, you can set Resolution and Target Siz e (output image size).
❏ umbnail: Only available if you select Photograph as the Document Type setting.
If you select this item and click Preview, you can scan by automatically detecting the scan area, direction,
or skew of the document, or place multiple photos on the scanner glass.
5. Click Preview.
Note:
❏ Depending on the photos and the scanning conditions, the scan results may not be as intended. Clear umbnail,
and only place one photo.
❏ When placing multiple photos, place them at least 20 mm (0.8 inch) apart. Also, the edge area of the scanner glass is
not scanned.
6. Adjust the quality or brightness of the image as necessary.
Note:
Depending on the originals, the scan results may not be as intended.
7.
Click Scan.
8. In the File Save Settings window, make appropriate settings and then click OK.
Note:
When Show this dialog box before next scan is cleared, the File Save Settings screen is not displayed and scanning
starts immediately. To display the File Save Settings screen, click the icon (File Save Settings) to the right of Scan,
before starting to scan.
Related Information
& “Placing Originals on the Scanner Glass” on page 52
& “EPSON Scan (Scanner Driver)” on page 152
Scanning Using Advanced Features
Scanning by Detecting the Original Automatically (Full Auto Mode)
You can start scanning by simply placing the original and clicking Scan. Select Full Auto Mode from the Mode list
in EPSON Scan.
User's Guide
Scanning
103