User manual
6. Close the document cover, and then close the ADF cover.
7. Open the ADF input tray.
8. Remove the jammed paper.
9. Close the ADF input tray.
Paper Does Not Feed Correctly
Check the following if the paper jams, paper is fed at a slant, several sheets of paper are fed at a time, no paper is
fed, or paper is ejected.
❏ Place the printer on a at surface and operate in the recommended environmental conditions.
❏ Use paper supported by this printer.
❏ Follow the paper handling precautions.
❏ Load paper in the correct direction, and slide the edge guides against the edges of the paper.
❏ Do not load more than the maximum number of sheets specied for the paper. For plain paper, do not load
above the line indicated by the triangle symbol on the edge guide.
❏ If the paper is ejected from the rear paper feed slot without being printed, rst start your print job, and then
load paper in the rear paper feed slot.
❏ Load one sheet of paper at a time when loading multiple sheets of paper.
❏ When several sheets of paper are fed at a time during manual 2-sided printing, remove any paper which is
loaded in the paper source before you reload the paper.
❏ Load and eject paper without printing to clean the paper path.
❏ Make sure the paper size and paper type settings are correct.
User's Guide
Solving Problems
166