User manual

Placing Originals
Place originals on the scanner glass or the ADF (ADF-equipped printers only). Use the scanner glass for originals
that the ADF does not support.
You can scan multiple originals and both sides of the originals at the same time with the ADF.
Placing Originals on the Scanner Glass
!
Caution:
Be careful not to trap your hand or ngers when opening or closing the document cover. Otherwise you may be
injured.
c
Important:
When placing bulky originals such as books, prevent exterior light from shining directly onto the scanner glass.
1. Open the document cover.
2. Remove any dust or stains on the scanner glass.
3.
Place the original face-down and slide it to the corner mark.
Note:
A range of 1.5 mm from the edges of the scanner glass is not scanned.
User's Guide
Placing Originals
52