User manual

Printing
Printing from the Control Panel
Printing Photos by Selecting from a Memory Card
1. Load paper in the printer.
c
Important:
❏ When loading in the paper cassette, make the paper settings on the control panel.
❏ When loading in the rear paper feed slot, select the rear paper feed slot as the paper source, and then press
the
x button before loading paper.
2. Insert a memory card into the printer.
c
Important:
Do not remove the memory card until you have
nished
printing.
Note:
❏ Remove the memory card when printing from an external storage device such as a hard disk or USB ash memory.
❏ If you have 1000 or more photos on your memory card, photos are automatically divided into groups containing a
maximum of 999 photos and the Select Group screen is displayed. Select a group containing the photos you want to
print.
3. Select Print Photos on the control panel.
4. Select a photo you want to print from the screen displaying a thumbnail view.
Note:
❏ If you have a lot of photos on your memory card, you can sort photos to select them easily by pressing Options >
Browse.
❏ If you want to change the group displayed when you have 1000 or more photos on your memory card, select a group
by pressing Options > Select Location > Select Group.
5. Select a photo using l or r , and then set the number of copies using – or +. When printing more than one
photo, repeat this procedure.
Note:
❏ If you want to show a photo without indicators, such as buttons when one photo is displayed on a screen, press
anywhere on the screen except for the buttons. Press anywhere again to show the buttons.
❏ Press Edit, and then select Crop/Zoom to crop a part of a photo. Use
u , d , l , or r on the screen to move the
frame to the area you want to crop, and then press – or + to change the size of the frame. Press the
button to rotate
the frame.
6. Press Settings to make the paper and print settings.
User's Guide
Printing
64