User manual

Copying
Copying Basics
1. Load paper in the printer.
c
Important:
❏ When loading in the paper cassette, make the paper settings on the control panel.
❏ When loading in the rear paper feed slot, select the rear paper feed slot as the paper source, and then press
the
x button before loading paper.
2.
Place the originals. If you want to copy multiple originals or make 2-sided copies, place all of the originals on
the ADF (ADF-equipped printers only).
3.
Select Copy on the control panel.
4. Set the number of copies using – or +.
5. Select color copy or monochrome copy.
6.
Check the settings such as the paper size and the paper type and change settings if necessary.
Note:
❏ If you want to copy by reducing or enlarging the size of a document by a specic percentage, select Custom Size as
the Reduce/Enlarge setting, and then specify a percentage on the text entry screen displayed.
❏ When using ADF, you can only copy on A4-size plain paper at the same magnication.
If you change any of the following settings, you cannot copy: Reduce/Enlarge: Actual Size, Paper Size: A4, Paper
Ty pe: plain papers. However, the reduce/enlarge setting is xed at Auto Fit Page if you select A4, 2-up Copy (ADF-
equipped printers only).
❏ If you place originals that are larger than A4 size on the ADF, they are trimmed to A4 size (ADF-equipped printers
only).
7. Press the x button.
Related Information
&
“Loading Paper in the Paper Cassette 1” on page 41
& “Loading Paper in the Paper Cassette 2” on page 45
& “Loading Paper in the Rear Paper Feed Slot” on page 48
& “Placing Originals on the Scanner Glass” on page 52
& “Placing Originals on the ADF (ADF-equipped Printers Only)” on page 54
& “Copy Mode” on page 20
Copying Photos
You can copy multiple photos at the same time. You can also restore the colors in faded photos.
User's Guide
Copying
97