User Guide

Table Of Contents

2. Place your original facedown on the scanner glass with the top facing into the corner. Slide the

original to the edges of the indicated corner.

Note: You can place multiple originals on the scanner glass. Just make sure they are at least

0.8 inch (20 mm) away from each other.

Note: The edges of your original may be cropped by 0.06 inch (1.5 mm) from the edge of the

scanner glass. If you are scanning in Full Auto mode or using thumbnail preview in another mode in

Epson Scan, the edges of your original may be cropped by about 0.2 inch (4.5 mm) from the top and

side edges. Manually position your original away from the edges to prevent cropping.

3. Close the document cover gently to keep your original in place.

Note: If originals are placed on the scanner glass and loaded in the ADF at the same time, the

originals loaded in the ADF are processed first.

Parent topic: Placing Originals on the Product