Benutzerhandbuch NPD5539-02 DE
Benutzerhandbuch Copyright Copyright Kein Teil dieser Veröffentlichung darf ohne die vorherige schriftliche Zustimmung der Seiko Epson Corporation vervielfältigt, in einem Abrufsystem gespeichert oder in jeglicher Form oder durch irgendein Mittel, sei es elektronisch, mechanisch, durch Fotokopieren, Aufzeichnen oder anderweitig, übertragen werden. Bezüglich der Nutzung der hierin enthaltenen Informationen wird keine Patenthaftung übernommen.
Benutzerhandbuch Markennachweis Markennachweis ❏ EPSON ist eine eingetragene Marke und EPSON EXCEED YOUR VISION oder EXCEED YOUR VISION ist eine Marke der Seiko Epson Corporation. ® ❏ PRINT Image Matching™ und das PRINT Image Matching Logo sind Marken der Seiko Epson Corporation. Copyright © 2001 Seiko Epson Corporation. All rights reserved. ❏ Epson Scan 2 software is based in part on the work of the Independent JPEG Group.
Benutzerhandbuch Inhalt Inhalt WLAN-Einstellungen am Bedienfeld vornehmen. . 24 Manuelle Wi-Fi-Einstellungen. . . . . . . . . . . . . . .24 Vornehmen von Wi-Fi-Einstellungen durch Drücken einer Taste. . . . . . . . . . . . . . . . . . . . . . 25 Vornehmen von WLAN-Einstellungen mit PIN Code-Einrichtung (WPS). . . . . . . . . . . . . . 26 Vornahme von Wi-Fi Direct (Simple AP)Verbindungseinstellungen. . . . . . . . . . . . . . . . . 27 Überprüfen des Netzwerkverbindungsstatus. . . . . .
Benutzerhandbuch Inhalt DPOF-Druck. . . . . . . . . . . . . . . . . . . . . . . . . . .48 Menüoptionen für Fotos drucken-Modus. . . . . . 48 Drucken vom Computer. . . . . . . . . . . . . . . . . . . . .49 Druckergrundlagen — Windows. . . . . . . . . . . . .49 Druckergrundlagen — Mac OS X. . . . . . . . . . . . 50 2-seitiges Drucken (nur für Windows). . . . . . . . .53 Drucken von mehreren Seiten auf ein Blatt. . . . . 54 Drucken mit automatischer Anpassung an das Papierformat. . . . . . . . . . . . . . . .
Benutzerhandbuch Inhalt Ausführen von Web Config in einem Webbrowser. . . . . . . . . . . . . . . . . . . . . . . . . . .104 Ausführen von Web Config unter Windows. . . . 104 Ausführen von Web Config unter Mac OS X. . . 105 Windows-Druckertreiber. . . . . . . . . . . . . . . . . . . 105 Anleitung für den Windows-Druckertreiber. . . 106 Konfigurieren der Betriebseinstellungen für den Windows-Druckertreiber. . . . . . . . . . . . . . 108 Mac OS X-Druckertreiber. . . . . . . . . . . . . . . . . . .
Benutzerhandbuch Inhalt Scannen kann nicht über das Bedienfeld gestartet werden. . . . . . . . . . . . . . . . . . . . . . . .136 Probleme mit gescannten Bildern. . . . . . . . . . . . . 137 Ungleichmäßige Farben, Schmutz, Flecken usw. erscheinen beim Scannen vom Vorlagenglas. . . . . . . . . . . . . . . . . . . . . . . . . . 137 Die Bildqualität ist mangelhaft. . . . . . . . . . . . . 137 Der Aufdruck scheint durch den Bildhintergrund. . . . . . . . . . . . . . . . . . . . . . . .
Benutzerhandbuch Über das vorliegende Handbuch Über das vorliegende Handbuch Einführung in die Handbücher Die folgenden Handbücher werden mit dem Epson-Drucker geliefert. Neben den Handbüchern können Sie auch die Hilfe-Funktion in den zahlreichen Software-Anwendungen von Epson verwenden. ❏ Hier starten (Handbuch in Papierform) Bietet Ihnen Informationen zur Einrichtung des Druckers, Installation der Software, Druckerverwendung, Problemlösung, usw. ❏ Benutzerhandbuch (digitales Handbuch) Dieses Handbuch.
Benutzerhandbuch Über das vorliegende Handbuch In diesem Handbuch verwendete Beschreibungen ❏ Die Bildschirmdarstellungen des Druckertreibers und des Scannertreibers Epson Scan 2 stammen aus Windows 10 oder Mac OS X v10.11.x. Der Inhalt der Bildschirmdarstellungen hängt vom Modell und von der Situation ab. ❏ Die in diesem Handbuch verwendeten Abbildungen sind lediglich Beispiele. Auch wenn es von Modell zu Modell leichte Abweichungen geben kann, liegt allen das gleiche Funktionsprinzip zugrunde.
Benutzerhandbuch Wichtige Anweisungen Wichtige Anweisungen Sicherheitsanweisungen Lesen und befolgen Sie diese Anweisungen, um einen sicheren Betrieb dieses Druckers sicherzustellen. Bitte bewahren Sie dieses Handbuch zum späteren Nachlesen gut auf. Beachten und befolgen Sie auch alle am Drucker angebrachten Warnungen und Anweisungen. ❏ Einige der an Ihrem Drucker verwendeten Symbole sollen die Sicherheit und angemessene Verwendung des Druckers gewährleisten.
Benutzerhandbuch Wichtige Anweisungen ❏ Nach dem Entfernen der Dichtung dürfen Tintenflaschen nicht gekippt oder geschüttelt werden, da sonst Tinte austreten kann. ❏ Tintenflaschen und die Tintenbehältereinheit außerhalb der Reichweite von Kindern aufbewahren. Kindern nicht erlauben, aus Tintenflaschen oder Tintenflaschenkappen zu trinken oder damit zu spielen.
Benutzerhandbuch Wichtige Anweisungen Hinweise und Warnungen zur Verwendung des Druckers ❏ Führen Sie keine Gegenstände durch die Schlitze im Gehäuse des Druckers. ❏ Stecken Sie während eines Druckvorgangs Ihre Hand nicht in das Innere des Druckers. ❏ Das weiße, flache Kabel und die Tintenschläuche im Inneren des Druckers nicht berühren. ❏ Verwenden Sie im Geräteinneren oder in der Umgebung des Druckers keine Sprays, die entzündliche Gase enthalten. Dies könnte ein Feuer verursachen.
Benutzerhandbuch Wichtige Anweisungen ❏ Verwenden Sie nur Speicherkarten, die mit dem Drucker kompatibel sind. Zugehörige Informationen & „Technische Daten von unterstützten Speicherkarten“ auf Seite 147 Hinweise und Warnungen zum Verwenden der LCD-Anzeige ❏ Die LCD-Anzeige kann ein paar kleine helle oder dunkle Punkte enthalten und aufgrund ihrer Eigenschaften ungleichmäßig hell sein. Dies ist normal. Es handelt sich dabei nicht um eine Beschädigung.
Benutzerhandbuch Druckergrundlagen Druckergrundlagen Bezeichnungen und Funktionen der Teile A Papierführungsschiene Sorgt dafür, dass das Papier gerade in den Drucker eingezogen wird. Schieben Sie die Schienen an die Papierkanten heran. B Papiereinzug hinten Enthält Papier C Papierauflage Dient als Auflage für das eingelegte Papier D Einzugsschutz Verhindert, dass Fremdkörper in den Drucker gelangen. Normalerweise bleibt dieser Schutz geschlossen.
Benutzerhandbuch Druckergrundlagen A Scannereinheit Scannt die positionierten Vorlagen. Öffnen Sie diese Abdeckung, um gestautes Papier aus dem Drucker zu entfernen. B Tintenbehältereinheit Enthält die Tintenbehälter. C Tintenvorratsbehälter (Tintenbehälter) Versorgt den Druckkopf mit Tinte. D Druckkopf (unter diesem Bereich) Gibt Tinte aus. A Vorlagenabdeckung Verhindert das Eindringen von externem Licht beim Scannen. B Vorlagenglas Platzieren Sie die Vorlagen.
Benutzerhandbuch Druckergrundlagen A Netzeingang Anschluss für den Netzstecker B USB-Anschluss Anschluss für ein USB-Kabel zur Verbindung mit einem Computer. Bedienfeld Sie können den Winkel des Bedienfeldes ändern. Um das Bedienfeld abzusenken, drücken Sie den Hebel auf der Rückseite des Bedienfeldes, siehe Abbildung unten.
Benutzerhandbuch Druckergrundlagen A Dient zum Ein- bzw. Ausschalten des Druckers. Schalten Sie den Drucker nicht aus, solange die Betriebsanzeige blinkt (während der Drucker in Betrieb ist oder Daten verarbeitet). Ziehen Sie den Netzstecker, wenn die Betriebsanzeige aus ist. B C Zeigt die Startseite an. u d l r OK Wählen Sie mit den Tasten u d l r ein Menü und drücken Sie die Taste OK zur Ausführung des gewählten Menüpunktes.
Benutzerhandbuch Druckergrundlagen C Funktionssymbole und Namen werden als Modussymbole angezeigt. Kopieren Ruft den Modus Kopieren auf, mit dem Sie ein Dokument kopieren können. Fotos drucken Ruft den Modus Fotos drucken auf, mit dem Sie Fotos von der Speicherkarte drucken können. Scannen Ruft den Modus Scannen auf, mit dem Sie ein Dokument oder Foto scannen können. Pers. Schreibpapier Ruft den Modus Pers. Schreibpapier auf, mit dem Sie Originalpapier, wie z. B.
Benutzerhandbuch Druckergrundlagen Symbole Beschreibungen Stellt den Zeichentyp um. ABC: Großbuchstaben abc: Kleinbuchstaben 123: Zahlen und Symbole ud Auswahl des Zeichens, das eingegeben werden soll. r Bewegt den Cursor nach rechts. l Löscht das Zeichen links vom Cursor (Rückschritt). OK Geben Sie die ausgewählten Zeichen ein. Kehrt zum vorherigen Bildschirm zurück. Eingeben der Übungszeichenkette „13By“ 1. Drücken Sie zweimal auf die Taste , um den Zeichentyp auf 123 umzuschalten. 2.
Benutzerhandbuch Druckergrundlagen 4. Drücken Sie einmal die Taste r, um den Cursor zu bewegen und drücken Sie dann , um den Zeichentyp auf ABC einzustellen. Drücken Sie zweimal die Taste u, um „B“ auszuwählen. 5. Drücken Sie einmal die Taste r, um den Cursor zu bewegen und drücken Sie dann auf abc einzustellen. Drücken Sie zweimal die Taste d, um „y“ auszuwählen. 6. Drücken Sie die Taste OK.
Benutzerhandbuch Netzwerkeinstellungen Netzwerkeinstellungen Arten von Netzwerkverbindungen WLAN-Verbindung Verbinden Sie den Drucker und den Computer oder das Smartgerät mit dem WLAN-Access Point. Diese Methode eignet sich für Heim- und Büronetzwerke, in denen die Computer über WLAN mit einem Access Point verbunden sind.
Benutzerhandbuch Netzwerkeinstellungen Hinweis: Wi-Fi Direct (Simple AP)-Verbindung ist eine Verbindungsmethode, die den Ad-Hoc-Modus ersetzen soll. Der Drucker kann über Wi-Fi und Wi-Fi Direct (Simple AP) gleichzeitig verbunden werden. Wenn Sie jedoch in Wi-Fi Direct (Simple AP) eine Netzwerkverbindung starten, wenn der Drucker über Wi-Fi verbunden ist, wird die Wi-Fi-Verbindung vorübergehend getrennt.
Benutzerhandbuch Netzwerkeinstellungen ❏ Windows Wählen Sie den Verbindungstyp aus und klicken Sie dann auf Weiter. ❏ Mac OS X Wählen Sie den Verbindungstyp aus. Lassen Sie sich von den Hinweisen auf dem Bildschirm durch die nötigen Schritte führen. Die erforderliche Software wird installiert.
Benutzerhandbuch Netzwerkeinstellungen Verbinden mit einem Smart-Gerät Sie können den Drucker über ein Smart-Gerät verwenden, wenn Sie den Drucker mit dem gleichen Wi-FiNetzwerk (SSID) wie das Smart-Gerät verbinden. Um den Drucker über ein Smart-Gerät zu verwenden, nehmen Sie die Einrichtung über folgende Webseite vor. Greifen Sie über das Smart-Gerät, mit dem Sie den Drucker verwenden möchten, auf die Webseite zu. http://epson.
Benutzerhandbuch Netzwerkeinstellungen 4. Wählen Sie Wi-Fi-Einrichtungs- assistent und drücken Sie dann die Taste OK. 5. Wählen Sie die SSID für den Zugangspunkt im Bedienfeld des Druckers und drücken Sie dann die Taste OK. Hinweis: ❏ Wenn die SSID, zu der Sie die Verbindung durchführen möchten, nicht auf dem Bedienfeld des Druckers angezeigt wird, wählen Sie Erneut suchen und geben Sie die SSID dann direkt ein.
Benutzerhandbuch Netzwerkeinstellungen 5. Halten Sie die Taste [WPS] am Zugangspunkt gedrückt, bis die Sicherheitslampe blinkt. Falls Sie nicht wissen, wo sich die Taste [WPS] befindet, oder falls am Zugangspunkt keine Tasten vorhanden sind, finden Sie ausführliche Informationen in der mit dem Zugangspunkt gelieferten Dokumentation. 6. Drücken Sie die Taste OK im Druckerbedienfeld. Folgen Sie der Bildschirmanleitung.
Benutzerhandbuch Netzwerkeinstellungen Hinweis: Wenn keine Verbindung hergestellt werden kann, starten Sie den Zugangspunkt neu, verringern Sie den Abstand des Zugangspunktes zum Drucker und versuchen Sie es erneut. Wenn weiterhin keine Verbindung möglich ist, drucken Sie einen Verbindungsbericht aus und prüfen Sie die Abhilfemaßnahme.
Benutzerhandbuch Netzwerkeinstellungen Überprüfen des Netzwerkverbindungsstatus Überprüfen des Netzwerkstatus mit dem Netzwerksymbol Anhand des Netzwerksymbols im Startbildschirm des Druckers können Sie den Netzwerkverbindungsstatus prüfen. Das Symbol ändert sich je nach Verbindungstyp und Stärke des Hochfrequenzsignals.
Benutzerhandbuch Netzwerkeinstellungen Meldungen und Abhilfemaßnahmen im Netzwerkverbindungsbericht Überprüfen Sie die Meldungen und Fehlercodes im Netzwerkverbindungsbericht und führen Sie dann die folgenden Abhilfemaßnahmen durch. a. Fehlercode b. Meldungen zur Netzwerkumgebung a. Fehlercode Code Abhilfemaßnahme E-1 ❏ Vergewissern Sie sich, dass das Ethernet-Kabel an den Drucker, einen Hub oder ein anderes Netzwerkgerät angeschlossen ist.
Benutzerhandbuch Netzwerkeinstellungen Code Abhilfemaßnahme E-2 ❏ Vergewissern Sie sich, dass der Zugangspunkt eingeschaltet ist. E-3 ❏ Überprüfen Sie, dass der Computer oder die anderen Geräte richtig mit dem Zugangspunkt verbunden sind. E-7 ❏ Stellen Sie den Drucker in der Nähe des Zugangspunkts auf. Entfernen Sie eventuell vorhandene Hindernisse zwischen beiden Geräten. ❏ Falls Sie die SSID manuell eingegeben haben, überprüfen Sie, ob sie richtig ist.
Benutzerhandbuch Netzwerkeinstellungen Code Abhilfemaßnahme E-9 Überprüfen Sie Folgendes. ❏ Die Geräte sind eingeschaltet. ❏ Sie können über die Geräte, die Sie mit dem Drucker verbinden möchten, auf das Internet und andere Computer oder Netzwerkgeräte in demselben Netzwerk zugreifen. Sollte das Problem nach Prüfen der obigen Punkte fortbestehen, setzen Sie die Netzwerkeinstellungen mithilfe des Installationsprogramms zurück. Sie können es über folgende Webseite aufrufen. http://epson.
Benutzerhandbuch Netzwerkeinstellungen Code Abhilfemaßnahme E-13 Überprüfen Sie Folgendes. ❏ Die Netzwerkgeräte, wie etwa der Zugangspunkt, Hub und Router, sind eingeschaltet. ❏ Die TCP/IP-Einstellungen für die Netzwerkgeräte wurden nicht manuell konfiguriert. (Wenn die TCP/IPEinstellungen des Druckers automatisch und die TCP/IP-Einstellungen für die anderen Netzwerkgeräte manuell konfiguriert werden, kann das Netzwerk des Druckers von dem der anderen Geräte abweichen.
Benutzerhandbuch Netzwerkeinstellungen 4. Drücken Sie die Taste x. Das Netzwerkstatusblatt wird gedruckt. Austauschen oder Hinzufügen neuer Access Points Sollte sich die SSID durch Austauschen eines Access Points ändern, oder durch Hinzufügen eines Access Points ein neues Netzwerk entstehen, setzen Sie bitte die WLAN-Einstellungen zurück.
Benutzerhandbuch Netzwerkeinstellungen ❏ Windows Wählen Sie Verbindungsmethode ändern oder erneut einstellen auf dem Bildschirm Software-Installation wählen und klicken Sie dann auf Weiter. ❏ Mac OS X Wählen Sie aus, wie der Drucker mit dem Computer verbunden werden soll.
Benutzerhandbuch Netzwerkeinstellungen Deaktivieren von Wi-Fi im Bedienfeld Bei Deaktivierung von Wi-Fi wird die Wi-Fi-Verbindung getrennt. 1. Wählen Sie Einstellung auf dem Startbildschirm. 2. Wählen Sie Netzwerk- einstellungen. 3. Wählen Sie Wi-Fi-Setup. 4. Wählen Sie Wi-Fi deaktivieren. 5. Prüfen Sie die Meldung und wählen Sie dann Ja.
Benutzerhandbuch Laden von Papier Laden von Papier Vorsichtsmaßnahmen bei der Handhabung von Papier ❏ Lesen Sie die dem Papier beigefügte Gebrauchsanweisung. ❏ Vor dem Einlegen sollten Sie den Papierstapel auffächern und die Kanten bündig ausrichten. Fotopapier darf weder aufgefächert noch aufgerollt werden. Andernfalls könnte die bedruckbare Seite beschädigt werden. ❏ Vor dem Einlegen muss gewelltes Papier geglättet werden. Alternativ können Sie das Papier auch vorsichtig anders herum aufrollen.
Benutzerhandbuch Laden von Papier Verfügbares Papier und Fassungskapazität Epson empfiehlt die Verwendung von Epson-Originalpapier, um hochwertige Ausdrucke zu gewährleisten.
Benutzerhandbuch Laden von Papier Medienname Medium Bedienfeld Druckertreiber, Smartgerät*1 Epson Bright White Ink Jet Paper*2 Normalpapier Normalpapier Epson Premium Glossy Photo Paper*2 Prem.
Benutzerhandbuch Laden von Papier 3. Legen Sie das Papier senkrecht ein, sodass es rechts am Papiereinzug hinten anliegt und die bedruckbare Seite nach oben zeigt. c Wichtig: Legen Sie nicht mehr Blätter ein, als die für das Papier angegebene Höchstzahl. Legen Sie Normalpapier nicht über die mit dem Dreiecksymbol gekennzeichnete Linie an der Papierführung ein.
Benutzerhandbuch Laden von Papier 4. Schieben Sie die Papierführungsschiene an die Papierkante heran und schließen Sie dann den Einzugsschutz. 5. Prüfen Sie die im Bedienfeld angezeigten Einstellungen für das Papierformat und den Papiertyp. Um diese Einstellungen zu verwenden, wählen Sie Bestätigen mit der Taste u oder d, drücken Sie OK und fahren Sie mit Schritt 7 fort.
Benutzerhandbuch Laden von Papier 6. Wählen Sie das Papierformat im Papiereinstellungsbildschirm mit der Taste l oder r und drücken Sie dann OK. Wählen Sie die Papiersorte im Papiereinstellungsbildschirm auf die gleiche Weise und drücken Sie dann OK. Bestätigen Sie die Einstellungen und drücken Sie dann die Taste OK. Hinweis: Sie können den Bildschirm mit den Einstellungen für Papierformat und Papiertyp auch durch Auswahl der folgenden Menüs aufrufen.
Benutzerhandbuch Einlegen bzw. Platzieren von Vorlagen Einlegen bzw. Platzieren von Vorlagen Platzieren von Vorlagen auf dem Vorlagenglas c Wichtig: Achten Sie bei der Verwendung sperriger Vorlagen, wie z. B. einem Buch, darauf, dass kein externes Licht direkt auf das Vorlagenglas scheint. 1. Öffnen Sie die Vorlagenabdeckung. 2. Entfernen Sie ggf. Staub und Flecken vom Vorlagenglas. 3. Legen Sie die Vorlage mit der bedruckten Seite nach unten ein und schieben Sie sie bis zur Eckmarkierung.
Benutzerhandbuch Einlegen bzw. Platzieren von Vorlagen Gleichzeitiges Auflegen mehrerer Fotos für das Scannen Sie können im Fotomodus in Epson Scan 2 mehrere Fotos gleichzeitig scannen und die einzelnen Bilder speichern, wenn Sie Vorschaubild aus der Liste oberhalb des Vorschaufensters wählen. Legen Sie die Fotos etwa 4,5 mm vom horizontalen bzw. vertikalen Rand des Vorlagenglas auf, mit einem Abstand von mindestens 20 mm voneinander. Die Fotos sollten größer sein als 15×15 mm.
Benutzerhandbuch Einsetzen einer Speicherkarte Einsetzen einer Speicherkarte Unterstützte Speicherkarten miniSD* miniSDHC* microSD* microSDHC* microSDXC* SD SDHC SDXC * Verwenden Sie einen für den Speicherkartensteckplatz passenden Adapter. Andernfalls könnte die Karte feststecken. Zugehörige Informationen & „Technische Daten von unterstützten Speicherkarten“ auf Seite 147 Einsetzen und Entfernen von Speicherkarten 1. Setzen Sie eine Speicherkarte in den Drucker ein.
Benutzerhandbuch Einsetzen einer Speicherkarte 2. Wenn Sie die Speicherkarte nicht mehr benötigen, achten Sie darauf, dass die Anzeige nicht blinkt und nehmen Sie dann die Karte heraus. c Wichtig: Wenn Sie die Speicherkarte entfernen, solange die Anzeige blinkt, kann es zu Datenverlust auf der Speicherkarte kommen. Hinweis: Wenn Sie von einem Computer auf die Speicherkarte zugreifen, müssen Sie die Hardware sicher aus dem Computer auswerfen.
Benutzerhandbuch Drucken Drucken Drucken vom Bedienfeld Drucken von Fotos durch Auswahl auf einer Speicherkarte 1. Legen Sie Papier in den Drucker ein. c Wichtig: Konfigurieren Sie die Papiereinstellungen im Bedienfeld. 2. Setzen Sie eine Speicherkarte in den Drucker ein. c Wichtig: Entfernen Sie die Speicherkarte erst, wenn der Druck abgeschlossen ist. 3. Rufen Sie im Startbildschirm Fotos drucken mit der Taste l oder r auf und drücken Sie dann OK. 4.
Benutzerhandbuch Drucken Drucken von liniiertem Papier, Kalendern und Original-Briefpapier Mit dem Menü Pers. Schreibpapier können Sie ganz einfach liniertes Papier, Kalender und Original-Briefpapier drucken. 1. Legen Sie Papier in den Drucker ein. c Wichtig: Konfigurieren Sie die Papiereinstellungen im Bedienfeld. 2. Um Briefpapier mit einem Foto auf der Speicherkarte zu drucken, setzen Sie die Speicherkarte in den Drucker ein. 3. Rufen Sie im Startbildschirm Pers.
Benutzerhandbuch Drucken Schreibpapier Druckt verschiedene Arten von Schreibpapier im A4-Format mit einem Foto von der Speicherkarte als Hintergrund. Das Foto wird nur zart gedruckt, damit es leicht beschreibbar ist. Kalender Druckt einen Wochen- oder Monatskalender. Wählen Sie das Jahr und den Monat für den Monatskalender. DPOF-Druck Dieser Drucker ist kompatibel mit DPOF (Digital Print Order Format) Ver. 1.10. DPOF ist ein Format, in dem zusätzliche Informationen für Fotos gespeichert werden, wie z. B.
Benutzerhandbuch Drucken Drucken vom Computer Druckergrundlagen — Windows Hinweis: ❏ Eine Erläuterung zu den Einstellungsoptionen finden Sie in der Online-Hilfe. Klicken Sie mit der rechten Maustaste auf eine Option und anschließend auf Hilfe. ❏ Die Vorgehensweisen variieren je nach Anwendung. Ausführliche Informationen dazu finden Sie in der Hilfe der Anwendung. 1. Legen Sie Papier in den Drucker ein. c Wichtig: Konfigurieren Sie die Papiereinstellungen im Bedienfeld. 2.
Benutzerhandbuch Drucken ❏ Qualität: Wählen Sie die Druckqualität. Die Auswahl von Stark bietet höhere Druckqualität, aber ggf. eine geringere Druckgeschwindigkeit. ❏ Farbe: Wählen Sie Graustufen, wenn nur schwarz oder in Grautönen gedruckt werden soll. Hinweis: Beim Drucken auf Umschlägen wählen Sie Querformat als Einstellung für Ausrichtung. 7. Klicken Sie auf OK, um das Druckertreiber-Dialogfeld zu schließen. 8. Klicken Sie auf Drucken.
Benutzerhandbuch Drucken 3. Wählen Sie die Option Drucken im Menü Datei oder einen anderen Befehl aus, um das Dialogfeld Drucken aufzurufen. Falls nötig, klicken Sie auf Details einblenden oder d, um das Druckfenster zu erweitern. 4. Konfigurieren Sie die folgenden Einstellungen. ❏ Drucker: Wählen Sie Ihren Drucker. ❏ Voreinstellungen: Wählen Sie aus, wann Sie die registrierten Einstellungen verwenden möchten. ❏ Papierformat: Wählen Sie das im Drucker eingelegte Papierformat.
Benutzerhandbuch Drucken 5. Wählen Sie Druckereinstellungen aus dem Popup-Menü. Hinweis: Wenn unter Mac OS X v10.8.x oder einer höheren Version das Menü Druckereinstellungen nicht angezeigt wird, wurde der Epson-Druckertreiber nicht richtig installiert. die Optionen Systemeinstellungen > Drucker & Scanner (oder Drucken & Scannen, Wählen Sie im Menü Drucken & Faxen). Entfernen Sie den Drucker und fügen Sie ihn anschließend wieder hinzu. Gehen Sie wie folgt vor, um einen Drucker hinzuzufügen. http://epson.
Benutzerhandbuch Drucken 2-seitiges Drucken (nur für Windows) Der Druckertreiber trennt beim Drucken automatisch die geraden und ungeraden Seiten. Wenn der Drucker mit dem Drucken der ungeraden Seiten fertig ist, drehen Sie den Papierstapel entsprechend den Anweisungen um, um die geraden Seiten zu drucken. Sie können auch eine Broschüre drucken, die durch Falten eines Ausdrucks erstellt wird.
Benutzerhandbuch Drucken Zugehörige Informationen & „Verfügbares Papier und Fassungskapazität“ auf Seite 37 & „Einlegen des Papiers in die Papiereinzug hinten“ auf Seite 38 & „Druckergrundlagen — Windows“ auf Seite 49 Drucken von mehreren Seiten auf ein Blatt Sie können die Daten von zwei oder vier Seiten auf ein einziges Blatt Papier drucken. Drucken von mehreren Seiten pro Blatt – Windows 1. Legen Sie Papier in den Drucker ein. 2. Öffnen Sie die Datei, die Sie drucken möchten. 3.
Benutzerhandbuch Drucken Drucken von mehreren Seiten pro Blatt – Mac OS X 1. Legen Sie Papier in den Drucker ein. 2. Öffnen Sie die Datei, die Sie drucken möchten. 3. Rufen Sie das Dialogfeld Print (Drucken) auf. 4. Wählen Sie Layout aus dem Popup-Menü. 5. Wählen Sie die Anzahl der Seiten in Seiten pro Blatt, die Seitenfolge (Reihenfolge der Seiten) und Rahmen. 6. Stellen Sie die anderen Optionen je nach Bedarf ein. 7. Klicken Sie auf Drucken.
Benutzerhandbuch Drucken Hinweis: Wenn Sie ein verkleinertes Bild in der Seitenmitte drucken möchten, wählen Sie die Option Mitte. 5. Stellen Sie die anderen Optionen auf den Registerkarten Haupteinstellungen und Weitere Optionen je nach Bedarf ein und klicken Sie dann auf OK. 6. Klicken Sie auf Drucken.
Benutzerhandbuch Drucken 1. Legen Sie Papier in den Drucker ein. 2. Öffnen Sie die Datei, die Sie drucken möchten. 3. Rufen Sie das Druckertreiberfenster auf. 4. Wählen Sie auf der Registerkarte Druckauftrag-Organisator Lite die Option Haupteinstellungen. 5. Klicken Sie auf OK, um das Druckertreiber-Dialogfeld zu schließen. 6. Klicken Sie auf Drucken. Das Fenster Druckauftrag-Organisator Lite wird angezeigt und der Druckauftrag wird dem Druckprojekt hinzugefügt. 7.
Benutzerhandbuch Drucken 2. Öffnen Sie die Datei, die Sie drucken möchten. 3. Rufen Sie das Druckertreiberfenster auf. 4. Wählen Sie auf der Registerkarte 2x1 Poster, 2x2 Poster, 3x3 Poster, oder 4x4 Poster Multi-Page unter Haupteinstellungen aus. 5. Klicken Sie auf Einstellungen, nehmen Sie die geeigneten Einstellungen vor und klicken Sie dann auf OK. Hinweis: Schnittmarken drucken ermöglichen Ihnen das Ausdrucken einer Schnitthilfe. 6.
Benutzerhandbuch Drucken 1. Bereiten Sie Sheet 1 und Sheet 2 vor. Schneiden Sie die Ränder von Sheet 1 entlang der vertikalen blauen Linie durch die Mitte der oberen und unteren Kreuzmarkierungen ab. 2. Platzieren Sie die Kante von Sheet 1 auf Sheet 2 und richten Sie die Kreuzmarkierungen aneinander aus. Fügen Sie die beiden Blätter mit Klebeband auf der Rückseite vorübergehend zusammen.
Benutzerhandbuch Drucken 3. Schneiden Sie die zusammengefügten Blätter entlang der vertikalen roten Linie an den Ausrichtungsmarkierungen (diesmal die Linie links neben den Kreuzmarkierungen) durch. 4. Fügen Sie die Blätter mit Klebeband auf der Rückseite zusammen. 5. Wiederholen Sie die Schritte 1 bis 4, um Sheet 3 und Sheet 4 zusammenzufügen.
Benutzerhandbuch Drucken 6. Schneiden Sie die Ränder von Sheet 1 und Sheet 2 entlang der vertikalen blauen Linie durch die Mitte der linken und rechten Kreuzmarkierungen ab. 7. Platzieren Sie die Kante von Sheet 1 und Sheet 2 auf Sheet 3 und Sheet 4 und richten Sie die Kreuzmarkierungen aneinander aus. Fügen Sie die Blätter mit Klebeband auf der Rückseite vorübergehend zusammen.
Benutzerhandbuch Drucken 8. Schneiden Sie die zusammengefügten Blätter entlang der horizontalen roten Linie an den Ausrichtungsmarkierungen (diesmal die Linie über den Kreuzmarkierungen) durch. 9. Fügen Sie die Blätter mit Klebeband auf der Rückseite zusammen.
Benutzerhandbuch Drucken 10. Schneiden Sie die verbleibenden Ränder an der äußeren Hilfslinie ab. Drucken mithilfe von erweiterten Funktionen In diesem Abschnitt werden verschiedene zusätzliche Layout- und Druckfunktionen erläutert, die im Druckertreiber verfügbar sind.
Benutzerhandbuch Drucken Windows Um eine eigene Voreinstellung hinzuzufügen, stellen Sie auf den Registerkarten Dokumentgröße oder Druckmedium Optionen wie Haupteinstellungen und Weitere Optionen ein und klicken Sie dann in Benutzerdefinierte Voreinstellungen auf Druckvoreinstellungen. Hinweis: Um eine gespeicherte Voreinstellung zu löschen, klicken Sie auf Benutzerdefinierte Voreinstellungen, wählen Sie den Namen der Voreinstellung, die Sie aus der Liste löschen möchten, und löschen Sie sie.
Benutzerhandbuch Drucken Wenn Sie Automatisch auswählen, werden die Farben automatisch an die Einstellungen für Papiertyp und Druckqualität angepasst. Wenn Sie Benutzerdefiniert und Erweitert anklicken, können Sie eigene Einstellungen vornehmen. Mac OS X Rufen Sie das Dialogfeld Print (Drucken) auf. Wählen Sie Farbanpassung aus dem Popup-Menü und wählen Sie dann EPSON Modus Farbanpassung. Wählen Sie Farboptionen aus dem Popup-Menü und wählen Sie dann eine der verfügbaren Optionen.
Benutzerhandbuch Drucken Drucken mithilfe von Smartphones, Tablets und ähnlichen Geräten Verwenden von Epson iPrint Mit der Anwendung Epson iPrint können Sie Fotos, Dokumente und Websites von Smartphones, Tablet-PCs und ähnlichen Geräten aus ausdrucken. Sie können lokal drucken, d. h. von einem mit demselben Drahtlosnetzwerk wie der Drucker verbundenen Smartgerät, oder extern von einem entfernten Standort über das Internet drucken.
Benutzerhandbuch Drucken Die folgenden Bildschirme können ohne vorherige Ankündigung geändert werden. A Startseite, die beim Start der Anwendung angezeigt wird B Zeigt Informationen zum Einrichten des Druckers und häufig gestellte Fragen (FAQ) an C Zeigt den Bildschirm, auf dem Sie den Drucker auswählen und die Druckereinstellungen vornehmen können. Wenn Sie den Drucker einmal ausgewählt haben, müssen Sie ihn das nächste Mal nicht erneut auswählen. D Wählen Sie aus, was Sie drucken möchten, wie z.
Benutzerhandbuch Drucken Verwenden von AirPrint AirPrint ermöglicht das drahtlose Drucken von einem iPhone, iPad und iPod touch, auf denen die neueste Version von iOS läuft, und einem Mac mit der neuesten Version von OS X. Hinweis: Wenn Sie die Papierkonfigurationseinstellungen im Bedienfeld des Gerätes deaktiviert haben, können Sie AirPrint nicht verwenden. Bei Bedarf können Sie die Meldungen mit dem Link unten aktivieren. 1. Legen Sie Papier in das Gerät ein. 2.
Benutzerhandbuch Drucken Abbrechen eines Druckauftrags – Windows 1. Rufen Sie das Druckertreiberfenster auf. 2. Wählen Sie die Registerkarte Utility. 3. Klicken Sie auf Druckerwarteschl.. 4. Klicken Sie mit der rechten Maustaste auf den Auftrag, den Sie abbrechen möchten, und wählen Sie Abbrechen. Zugehörige Informationen & „Windows-Druckertreiber“ auf Seite 105 Abbrechen eines Druckauftrags – Mac OS X 1. Klicken Sie im Dock auf das Druckersymbol. 2.
Benutzerhandbuch Kopieren Kopieren 1. Legen Sie Papier in den Drucker ein. c Wichtig: Konfigurieren Sie die Papiereinstellungen im Bedienfeld. 2. Legen Sie die Vorlagen ein. 3. Rufen Sie im Startbildschirm Kopieren mit der Taste l oder r auf und drücken Sie dann OK. 4. Stellen Sie mit der Taste u oder d die Anzahl der Kopien ein. 5. Wählen Sie Farbkopie oder Schwarzweiß-Kopie mit der Taste l oder r. 6. Drücken Sie die Taste OK zur Anzeige und Prüfung der Druckeinstellungen.
Benutzerhandbuch Kopieren SW Kopiert die Vorlage in schwarzweiß (monochrom). Zoom Vergrößert oder verkleinert die Vorlagen. ❏ Tatsächliche Größe Kopiert mit 100% Vergrößerung. ❏ Autom. Anpass. Erfasst den Scanbereich und vergrößert oder verkleinert die Vorlage automatisch entsprechend dem gewählten Papierformat. Bei einer Vorlage mit weißen Rändern werden die weißen Ränder von der Eckmarkierung des Vorlagenglas als Scanbereich erfasst, aber die Ränder auf der gegenüberliegenden Seite werden ggf.
Benutzerhandbuch Scannen Scannen Scannen über das Bedienfeld Scannen an einen Computer Sie können ein gescanntes Bild auf einem Computer speichern. c Wichtig: Achten Sie darauf, dass Epson Scan 2 und Epson Event Manager auf dem Computer installiert sind, bevor Sie diese Funktion verwenden. 1. Legen Sie die Vorlagen ein. 2. Rufen Sie im Startbildschirm Scannen mit der Taste l oder r auf und drücken Sie dann OK. 3.
Benutzerhandbuch Scannen Scannen an einen Computer (WSD) Hinweis: ❏ Diese Funktion ist nur für Computer unter der englischen Version von Windows 10/Windows 8.1/Windows 8/Windows 7/ Windows Vista verfügbar. ❏ Wenn Sie Windows 7/Windows Vista verwenden, muss der Computer vorher mit dieser Funktion eingerichtet werden. 1. Legen Sie die Vorlagen ein. 2. Rufen Sie im Startbildschirm Scannen mit der Taste l oder r auf und drücken Sie dann OK. 3.
Benutzerhandbuch Scannen Klicken Sie auf Deinstallieren und beginnen Sie von vorn, wenn der Bildschirm Deinstallieren erscheint. Hinweis: Der im Netzwerk eingestellte Druckername und Modellname (EPSON XXXXXX (XX-XXXX)) werden im Netzwerkbildschirm angezeigt. Sie können den im Netzwerk eingestellten Druckernamen im Bedienfeld des Druckers oder auf einem Ausdruck des Netzwerkstatusblattes überprüfen. 4. Klicken Sie auf Ihr Gerät ist betriebsbereit. 5.
Benutzerhandbuch Scannen ❏ Windows Vista Klicken Sie auf Start > Systemsteuerung > Hardware und Sound > Drucker. 7. Achten Sie darauf, dass ein Symbol mit dem Druckernamen im Netzwerk angezeigt wird. Wählen Sie den Druckernamen, wenn Sie WSD verwenden. Zugehörige Informationen & „Netzwerkstatusblatt drucken“ auf Seite 32 Scannen von einem Computer Scannen mit Epson Scan 2 Sie können mit dem Scannertreiber „Epson Scan 2“ scannen.
Benutzerhandbuch Scannen 4. Wählen Sie die folgenden Einstellungen auf der Registerkarte Haupteinstellungen. ❏ Vorlagengröße: Wählen Sie das Format der Vorlage, die Sie aufgelegt haben. ❏ Bildtyp: Wählen Sie die Farben zum Speichern des gescannten Bilds. ❏ Auflösung: Wählen Sie die Auflösung. Hinweis: Die Einstellung Dokumentenquelle ist als Vorlagenglas festgelegt. Diese Einstellung können Sie nicht ändern. 5. Nehmen Sie nach Bedarf andere Scaneinstellungen vor.
Benutzerhandbuch Scannen 6. Legen Sie die Einstellungen zum Speichern von Dateien fest. ❏ Bildformat: Wählen Sie das Speicherformat aus der Liste. Sie können detaillierte Einstellungen für jedes Speicherformat außer BITMAP und PNG vornehmen. Wählen Sie Optionen aus der Liste, nachdem Sie das Speicherformat gewählt haben. ❏ Dateiname: Bestätigen Sie den angezeigten Dateinamen zum Speichern. Sie können Einstellungen für den Dateinamen ändern, indem Sie Einstellungen aus der Liste wählen.
Benutzerhandbuch Scannen 1. Legen Sie die Vorlagen ein. Wenn Sie mehrere Vorlagen auf das Scannerglas legen, können Sie diese gleichzeitig scannen. Stellen Sie sicher, dass zwischen den Vorlagen ein Abstand von mindestens 20 mm besteht. 2. Starten Sie Epson Scan 2. 3. Wählen Sie aus der Liste Fotomodus die Option Modus. 4. Wählen Sie die folgenden Einstellungen auf der Registerkarte Haupteinstellungen. ❏ Bildtyp: Wählen Sie die Farben zum Speichern des gescannten Bilds.
Benutzerhandbuch Scannen 5. Klicken Sie auf Vorschau. Das Vorschaufenster wird geöffnet und die Bilder werden als Miniaturbilder angezeigt. Hinweis: Um eine Vorschau des gesamten gescannten Bereichs anzuzeigen, wählen Sie Normal aus der Liste oberhalb des Vorschaufensters. 6. Bestätigen Sie die Vorschau und nehmen Sie auf der Registerkarte Erweiterte Einstellungen falls erforderlich Bildanpassungseinstellungen vor.
Benutzerhandbuch Scannen Sie können das gescannte Bild mit detaillierten Einstellungen anpassen, die sich für Fotos oder Bilder eignen, darunter folgende. ❏ Helligkeit: Sie können die Helligkeit des gescannten Bilds anpassen. ❏ Kontrast: Sie können den Kontrast für das gescannte Bild anpassen. ❏ Sättigung: Sie können die Sättigung (Farbwiedergabe) für das gescannte Bild anpassen. ❏ Unscharfe Maske: Sie können die Umrisse des Bildes verbessern und schärfen.
Benutzerhandbuch Scannen ❏ Ordner: Wählen Sie den Speicherordner für das gescannte Bild aus der Liste. Sie können einen anderen Ordner wählen oder einen neuen Ordner erstellen, indem Sie Auswählen aus der Liste wählen. 8. Klicken Sie auf Scannen.
Benutzerhandbuch Scannen Die folgenden Bildschirme können ohne vorherige Ankündigung geändert werden. A Startseite, die beim Start der Anwendung angezeigt wird B Zeigt Informationen zum Einrichten des Druckers und häufig gestellte Fragen (FAQ) an C Zeigt den Bildschirm, auf dem Sie den Drucker auswählen und die Druckereinstellungen vornehmen können. Wenn Sie den Drucker einmal ausgewählt haben, müssen Sie ihn das nächste Mal nicht erneut auswählen.
Benutzerhandbuch Nachfüllen von Tinte Nachfüllen von Tinte Kontrollieren der Tintenstände Stellen Sie mit einer Sichtprüfung der Tintenstände in allen Tintenbehältern im Drucker die tatsächlich verbleibende Tintenmenge fest. c Wichtig: Wenn Sie den Drucker bei einem Tintenstand unter der unteren Linie längere Zeit verwenden, kann der Drucker beschädigt werden. Eventuell sollten Sie Tinte nachfüllen. Sie können die ungefähren Tintenstände über den Computer kontrollieren.
Benutzerhandbuch Nachfüllen von Tinte 2. Klicken Sie auf Optionen & Zubehör > Dienstprogramm > Drucker-Dienstprogramm öffnen. 3. Klicken Sie auf EPSON Status Monitor. Tintenflaschencodes Epson empfiehlt, ausschließlich original Epson-Tintenflaschen zu verwenden. Im Folgenden sind die Codes für die Epson-Originaltintenflaschen aufgeführt.
Benutzerhandbuch Nachfüllen von Tinte ❏ Tintenflaschen nach dem Entfernen der Dichtung beim Aufbewahren oder Transportieren nicht kippen und keinen Stößen oder Temperaturschwankungen aussetzen. Andernfalls kann Tinte austreten, selbst wenn die Tintenflasche mit dem Deckel fest verschlossen ist. Achten Sie darauf, die Tintenflasche beim Festdrehen des Deckels aufrecht zu halten, und ergreifen Sie Maßnahmen, um ein Auslaufen beim Transportieren der Flasche zu verhindern.
Benutzerhandbuch Nachfüllen von Tinte 5. Die Abdeckung der Tintenbehältereinheit öffnen und den Tintenbehälterdeckel abnehmen. Bringen Sie die Kappe nach Entfernen wie in 3 in der nachstehenden Abbildung gezeigt am vorstehenden Teil des Tintenbehälters an. c Wichtig: ❏ Achten Sie darauf, keine Tinte zu verschütten. ❏ Achten Sie darauf, dass die Farbe des Tintenbehälters der Farbe der Tinte entspricht, die Sie nachfüllen möchten. 6.
Benutzerhandbuch Nachfüllen von Tinte Hinweis: ❏ Das Design der Tintenflaschen hängt vom Produktionsdatum und dem Ort des Kaufs ab. ❏ Die Kappe oder Abdeckung des Deckels nicht wegwerfen. Wenn nach dem Auffüllen des Behälters noch Tinte in der Tintenflasche verbleibt, verschließen Sie den Tintenflaschendeckel mit dieser Kappe oder Abdeckung. 7. Entfernen Sie den Deckel der Tintenflasche und die Dichtung der Tintenflasche entfernen und den Deckel wieder aufsetzen.
Benutzerhandbuch Nachfüllen von Tinte c Wichtig: Möglicherweise lässt sich nur schwer in den Tintenbehälter hineinsehen. Füllen Sie den Tintenbehälter vorsichtig, damit keine Tinte aus dem Einlass ausläuft. Hinweis: Wenn nach dem Neubefüllen des Tintenbehälters bis zur oberen Linie noch Tinte in der Tintenflasche verbleibt, verschließen Sie die Tintenflasche sicher mit der Kappe oder Abdeckung und bewahren Sie die Tintenflasche aufrecht zur späteren Verwendung auf. 9.
Benutzerhandbuch Nachfüllen von Tinte 12. Wählen Sie die von Ihnen aufgefüllte Farbe mit der Taste l oder r und drücken Sie dann OK. 13. Drücken Sie die Taste x. 14. Bestätigen Sie die Meldung und drücken Sie dann die Taste OK. Hinweis: Sie können die Tintenstände zurücksetzen, auch wenn Sie die Tinte nicht bis zur oberen Linie aufgefüllt haben. Der Drucker gibt jedoch erst dann Meldungen aus und unterbricht den Betrieb, wenn die Tintenstände unter die untere Linie fallen.
Benutzerhandbuch Druckerwartung Druckerwartung Überprüfen und Reinigen des Druckkopfs Verstopfte Düsen führen zu einem blassen Druckergebnis, Streifen oder unerwarteten Farben. Wenn sich die Druckqualität verschlechtert, prüfen Sie mit dem Düsentest, ob die Düsen verstopft sind. Sollte dies der Fall sein, muss der Druckkopf gereinigt werden. c Wichtig: Öffnen Sie die Scannereinheit nicht. Schalten Sie auch nicht den Drucker während des DruckkopfReinigungsvorgangs aus.
Benutzerhandbuch Druckerwartung 6. Überprüfen Sie das gedruckte Muster. Wenn unterbrochene Linien oder fehlende Segmente auftreten (siehe „NG“-Muster), sind die Druckkopfdüsen möglicherweise verstopft. Gehen Sie zum nächsten Schritt. Wenn Sie keine gebrochenen Linien oder fehlende Segmente wie im folgenden „OK“-Muster erkennen können, sind die Düsen nicht verstopft. Eine Druckkopfreinigung ist nicht notwendig. Wählen Sie Nein mit der Taste u oder d und drücken Sie dann OK zum Verlassen. 7.
Benutzerhandbuch Druckerwartung 2. Wählen Sie im Menü die Optionen Systemeinstellungen > Drucker & Scanner (oder Drucken & Scannen, Drucken & Faxen) und anschließend den Drucker aus. 3. Klicken Sie auf Optionen & Zubehör > Dienstprogramm > Drucker-Dienstprogramm öffnen. 4. Klicken Sie auf Düsentest. 5. Befolgen Sie die Anweisungen auf dem Bildschirm.
Benutzerhandbuch Druckerwartung Ersetzen der Tinte in den Tintenschläuchen - Mac OS X 1. Wählen Sie im Menü die Optionen Systemeinstellungen > Drucker & Scanner (oder Drucken & Scannen, Drucken & Faxen) und anschließend den Drucker aus. 2. Klicken Sie auf Optionen & Zubehör > Dienstprogramm > Drucker-Dienstprogramm öffnen. 3. Klicken Sie auf Hochdruck-Tintenspülung. 4. Befolgen Sie die Anweisungen auf dem Bildschirm.
Benutzerhandbuch Druckerwartung Ausrichten des Druckkopfs — Windows 1. Legen Sie Normalpapier im A4-Format in den Drucker ein. 2. Rufen Sie das Druckertreiberfenster auf. 3. Klicken Sie auf der Registerkarte Druckkopf-Justage auf Utility. 4. Folgen Sie der Bildschirmanleitung. Zugehörige Informationen & „Einlegen des Papiers in die Papiereinzug hinten“ auf Seite 38 & „Windows-Druckertreiber“ auf Seite 105 Ausrichten des Druckkopfs — Mac OS X 1.
Benutzerhandbuch Druckerwartung 5. Befolgen Sie zum Reinigen der Papierzuführung die Anweisungen am Bildschirm. Hinweis: Wiederholen Sie den Vorgang, bis das Papier nicht mehr mit Tinte verschmiert ist. Zugehörige Informationen & „Einlegen des Papiers in die Papiereinzug hinten“ auf Seite 38 Reinigen des Vorlagenglases Wenn die Kopien oder gescannten Bilder verschmiert oder verkratzt sind, reinigen Sie das Vorlagenglas. c Wichtig: Verwenden Sie nie Alkohol oder Verdünner zum Reinigen des Druckers.
Benutzerhandbuch Druckerwartung Prüfen der Gesamtzahl der in den Drucker eingezogenen Seiten Bedienfeld Die Information wird zusammen mit dem Düsentestmuster gedruckt. 1. Legen Sie Normalpapier im A4-Format in den Drucker ein. 2. Rufen Sie im Startbildschirm Einstellung mit der Taste l oder r auf und drücken Sie dann OK. 3. Wählen Sie Wartung mit der Taste l oder r und drücken Sie dann OK. 4. Wählen Sie Düsentest mit der Taste l oder r und drücken Sie dann OK. 5.
Benutzerhandbuch Druckerwartung Strom sparen – Bedienfeld 1. Rufen Sie im Startbildschirm Einstellung mit der Taste l oder r auf und drücken Sie dann OK. 2. Wählen Sie Druckereinstellungen mit der Taste l oder r und drücken Sie dann OK. 3. Wählen Sie Ausschalttimer oder Schlaftimer mit der Taste l oder r und drücken Sie dann OK. 4. Wählen Sie mit der Taste u oder d die Einstellung und drücken Sie dann OK. Energie sparen - Windows 1. Rufen Sie das Druckertreiberfenster auf. 2.
Benutzerhandbuch Menüoptionen für Einstellung-Modus Menüoptionen für Einstellung-Modus Durch Auswahl von Einstellung im Startbildschirm des Bedienfeldes können Sie Druckereinstellungen konfigurieren oder eine Druckerwartung durchführen. Menüoptionen für Wartung Wählen Sie die Menüs im Bedienfeld wie nachfolgend beschrieben. Einstellung > Wartung Düsentest Druckt ein Muster, um zu überprüfen, ob die Druckkopfdüsen verstopft sind. Druckkopfreinigung Reinigt verstopfte Düsen des Druckkopfs.
Benutzerhandbuch Menüoptionen für Einstellung-Modus ❏ Papiereinst.-Alarm Zeigt eine Meldung an, wenn die Papiereinstellungen für den Druckauftrag von den Papiereinstellungen des Druckers unter Einstellung > Druckereinstellungen > Papierquelleneinstl. > Papiereinrichtung abweichen, wenn Papier eingelegt ist. Diese Einstellung verhindert falsches Drucken. Wenn Papierkonfiguration deaktiviert ist, wird der Bildschirm Papiereinstellungen nicht angezeigt.
Benutzerhandbuch Menüoptionen für Einstellung-Modus ❏ PIN-Code (WPS) Geben Sie im Wireless-Router-Dienstprogramm den im Druckerdisplay angezeigten PIN-Code ein, um den Drucker mit einem Wi-Fi-Netzwerk zu verbinden. ❏ Auto-Wi-Fi-Verb. Verbindet den Drucker mit einem Wi-Fi-Netzwerk mit einem Computer, der mit dem Access-Point verbunden ist. Legen Sie die im Lieferumfang des Druckers enthaltene Software-Disc in den Computer ein und folgen Sie der Anleitung auf dem Bildschirm.
Benutzerhandbuch Menüoptionen für Einstellung-Modus Status Prüfen Sie, ob der Drucker bei den Epson Connect-Diensten registriert und damit verbunden ist. Zugehörige Informationen & „Epson Connect Service“ auf Seite 103 Menüoptionen für Google Cloud Print- Dienste Wählen Sie die Menüs im Bedienfeld wie nachfolgend beschrieben. Einstellung > Google Cloud Print- Dienste Registr. aufh. Deregistrieren Sie die Google Cloud Print-Dienste.
Benutzerhandbuch Menüoptionen für Einstellung-Modus Aktualisierung Prüft, ob die neueste Firmwareversion auf den Netzwerkserver hochgeladen worden ist. Wenn eine Aktualisierung verfügbar ist, können Sie wählen, ob die Aktualisierung gestartet werden soll. Aktuelle Version Zeigt die aktuelle Firmwareversion des Druckers an. Benachrichtigung Prüft regelmäßig auf Firmwareaktualisierungen und benachrichtigt Sie, wenn eine Aktualisierung verfügbar ist.
Benutzerhandbuch Netzwerkdienst und Softwareinformationen Netzwerkdienst und Softwareinformationen Dieser Abschnitt stellt die Netzwerkdienste und Softwareprodukte vor, die auf der Epson-Website oder der mitgelieferten CD für Ihren Drucker verfügbar sind. Epson Connect Service Durch die Nutzung des Epson Connect Dienstes im Internet können Sie auf einfache Weise direkt von Ihrem Smartphone, Tablet-PC oder Laptop jederzeit und von praktisch überall drucken.
Benutzerhandbuch Netzwerkdienst und Softwareinformationen Ausführen von Web Config in einem Webbrowser 1. Prüfen Sie die IP-Adresse des Druckers. Wählen Sie im Bedienfeld Einstellung > Netzwerk- einstellungen > Verbindungstest aus, und drücken Sie dann die Taste x, um den Netzwerkverbindungsbericht auszudrucken. Die IP-Adresse wird auf den Bericht gedruckt. 2. Starten Sie einen Webbrowser auf Ihrem Computer bzw.
Benutzerhandbuch Netzwerkdienst und Softwareinformationen Ausführen von Web Config unter Mac OS X 1. Wählen Sie im Menü die Optionen Systemeinstellungen > Drucker & Scanner (oder Drucken & Scannen, Drucken & Faxen) und anschließend den Drucker aus. 2. Klicken Sie auf Optionen & Zubehör> Drucker-Website anzeigen. Windows-Druckertreiber Der Druckertreiber steuert den Drucker entsprechend den Druckbefehlen von einer Anwendung. Einstellungen im Druckertreiber bieten die besten Druckergebnisse.
Benutzerhandbuch Netzwerkdienst und Softwareinformationen ❏ Windows XP Klicken Sie auf die Start-Schaltfläche und wählen Sie Systemsteuerung > Drucker und andere Hardware > Drucker und Faxe aus. Klicken Sie mit der rechten Maustaste auf den Drucker und wählen Sie Druckeinstellungen. Aufrufen des Druckertreibers über das Druckersymbol in der Taskleiste Das Druckersymbol in der Desktop-Taskleiste ist ein Verknüpfungssymbol, mit dem Sie den Druckertreiber schnell aufrufen können.
Benutzerhandbuch Netzwerkdienst und Softwareinformationen Registerkarte Weitere Optionen Sie können weitere Layout- und Druckoptionen wählen, wie z. B. ein anderes Format für die Druckausgabe oder Farbkorrekturen. Registerkarte Utility Sie können Wartungsfunktionen ausführen, wie z. B. Düsentest und Druckkopfreinigung, und durch Ausführen von EPSON Status Monitor 3 können Sie den Druckerstatus und Fehlerinformationen prüfen.
Benutzerhandbuch Netzwerkdienst und Softwareinformationen Konfigurieren der Betriebseinstellungen für den WindowsDruckertreiber Sie können dann Einstellungen, wie z. B. die Aktivierung des EPSON Status Monitor 3, vornehmen. 1. Rufen Sie das Druckertreiberfenster auf. 2. Klicken Sie auf der Registerkarte Utility auf Erweiterte Einstellungen. 3. Nehmen Sie die geeigneten Einstellungen vor und klicken Sie dann auf OK. Eine Erläuterung zu den Einstellungsoptionen finden Sie in der Online-Hilfe.
Benutzerhandbuch Netzwerkdienst und Softwareinformationen Anleitung für den Mac OS X-Druckertreiber Dialogfeld "Drucken" Wechseln Sie das Popup-Menü in der Mitte des Bildschirms zur Anzeige von weiteren Elementen. Popup-Menü Beschreibungen Druckereinstellungen Sie können die Druckerstandardeinstellungen ändern, wie z. B. Papiertyp und Druckqualität. Layout Sie können ein Layout für den Druck von mehreren Seiten auf einem Blatt auswählen oder einen Rand für den Druck einstellen.
Benutzerhandbuch Netzwerkdienst und Softwareinformationen Epson Printer Utility Sie können eine Wartungsfunktion ausführen, wie z. B. Düsentest und Druckkopfreinigung, und durch Ausführen von EPSON Status Monitor können Sie den Druckerstatus und Fehlerinformationen prüfen.
Benutzerhandbuch Netzwerkdienst und Softwareinformationen Epson Scan 2 (Scannertreiber) Epson Scan 2 ist eine Anwendung zum Steuern des Scanvorgangs. Sie können die Größe, die Auflösung, die Helligkeit, den Kontrast und die Qualität des gescannten Bilds anpassen. Hinweis: Sie können Epson Scan 2 auch von einer TWAIN-kompatiblen Scananwendung starten. Starten unter Windows ❏ Windows 10 Klicken Sie auf die Start-Schaltfläche und wählen Sie dann Alle Apps > EPSON > Epson Scan 2. ❏ Windows 8.
Benutzerhandbuch Netzwerkdienst und Softwareinformationen Zugehörige Informationen & „Scannen an einen Computer“ auf Seite 72 Epson Easy Photo Print Mit der Anwendung Epson Easy Photo Print können Sie schnell und einfach Fotos mit verschiedenen Layouts ausdrucken. Sie haben zudem die Möglichkeit, das Fotobild in einer Vorschau anzusehen und die Bilder oder deren Position anzupassen. Sie können die Fotos auch mit einem Rahmen ausdrucken.
Benutzerhandbuch Netzwerkdienst und Softwareinformationen EPSON Software Updater EPSON Software Updater ist eine Anwendung, die nach neuer oder aktualisierter Software im Internet sucht und diese installiert. Sie können auch die Firmware und das Handbuch des Druckers aktualisieren. Starten unter Windows ❏ Windows 10 Klicken Sie auf die Start-Schaltfläche und wählen Sie dann Alle Apps > Epson Software > EPSON Software Updater. ❏ Windows 8.
Benutzerhandbuch Netzwerkdienst und Softwareinformationen 4. Öffnen Sie Programm deinstallieren (oder Software): ❏ Windows 10/Windows 8.1/Windows 8/Windows 7/Windows Vista Wählen Sie unter Programme die Option Programm deinstallieren. ❏ Windows XP Klicken Sie auf Software. 5. Wählen Sie die Anwendung, die Sie deinstallieren möchten. 6. Deinstallieren Sie die Anwendungen: ❏ Windows 10/Windows 8.1/Windows 8/Windows 7/Windows Vista Klicken Sie auf Deinstallieren/ändern oder Deinstallieren.
Benutzerhandbuch Netzwerkdienst und Softwareinformationen Zugehörige Informationen & „EPSON Software Updater“ auf Seite 113 Installieren von Anwendungen Verbinden Sie Ihren Computer mit dem Netzwerk und installieren Sie die aktuellste Version der Anwendungen von der Website. Hinweis: ❏ Melden Sie sich am Computer als Administrator an. Geben Sie das Administratorkennwort ein, wenn der Computer Sie dazu auffordert. ❏ Bei einer erneuten Installation einer Anwendung muss diese zunächst deinstalliert werden.
Benutzerhandbuch Netzwerkdienst und Softwareinformationen Zugehörige Informationen & „EPSON Software Updater“ auf Seite 113 Aktualisieren der Druckerfirmware über das Bedienfeld Wenn der Drucker mit dem Internet verbunden ist, können Sie die Druckerfirmware über das Bedienfeld aktualisieren. Durch die Aktualisierung der Firmware erhöht sich ggf. die Druckerleistung oder es können neue Funktionen hinzugefügt werden.
Benutzerhandbuch Lösen von Problemen Lösen von Problemen Druckerzustand prüfen Überprüfen von Fehlercodes auf der LCD-Anzeige Bei Fehlern oder Informationen, die Ihre Aufmerksamkeit erfordern, wird im LCD-Bildschirm ein Code angezeigt. Code Situation Lösungen E-01 Es ist ein Druckerfehler aufgetreten. Scannereinheit öffnen und Papier- oder Schutzmaterialien vollständig aus dem Gerät entfernen. Schalten Sie das Gerät aus und wieder ein. E-02 Es ist ein Scannerfehler aufgetreten.
Benutzerhandbuch Lösen von Problemen Code Situation Lösungen Recovery Mode Der Drucker wurde im Wiederherstellungsmodus gestartet, da die Aktualisierung der Firmware fehlgeschlagen ist. Gehen Sie folgendermaßen vor, um die Firmware erneut zu aktualisieren. 1. Verbinden Sie Computer und Drucker mit einem USB-Kabel. (Im Wiederherstellungsmodus können Sie die Firmware nicht über eine Netzwerkverbindung aktualisieren.) 2. Rufen Sie Ihre regionale Epson-Website auf, um weitere Anweisungen zu erhalten.
Benutzerhandbuch Lösen von Problemen Entfernen von gestautem Papier Überprüfen Sie, welcher Fehler am Bedienfeld angezeigt wird, und befolgen Sie die entsprechenden Anweisungen, um das gestaute Papier einschließlich etwaiger abgerissener Papierreste zu entfernen. Löschen Sie als Nächstes den Fehler. c Wichtig: Entfernen Sie das gestaute Papier vorsichtig. Wird das Papier gewaltsam herausgezogen, könnte der Drucker beschädigt werden.
Benutzerhandbuch Lösen von Problemen 1. Öffnen Sie die Scannereinheit bei geschlossener Vorlagenabdeckung. 2. Entfernen Sie das gestaute Papier. c Wichtig: Berühren Sie nicht das weiße, flache Kabel, den durchsichtigen Teil und die Tintenschläuche im Inneren des Druckers. Andernfalls könnte es zu einer Fehlfunktion kommen.
Benutzerhandbuch Lösen von Problemen 3. Schließen Sie die Scannereinheit. Das Papier wird nicht richtig eingezogen Prüfen Sie folgende Punkte; ergreifen Sie dann die entsprechenden Maßnahmen zur Problemlösung. ❏ Stellen Sie den Drucker auf eine ebene Fläche und betreiben Sie ihn gemäß den empfohlenen Umgebungsbedingungen. ❏ Verwenden Sie Papier, das von diesem Drucker unterstützt wird. ❏ Befolgen Sie die Vorsichtsmaßnahmen bei der Handhabung von Papier.
Benutzerhandbuch Lösen von Problemen Papier wird schräg eingezogen Legen Sie das Papier in der richtigen Richtung ein und schieben Sie die Papierführungsschienen bis an die Kanten des Papiers. Zugehörige Informationen & „Einlegen des Papiers in die Papiereinzug hinten“ auf Seite 38 Einzug mehrerer Blätter gleichzeitig ❏ Legen Sie die Blätter einzeln ein.
Benutzerhandbuch Lösen von Problemen LCD-Anzeige wird dunkel Der Drucker befindet sich im Ruhemodus. Drücken Sie eine beliebige Taste auf dem Bedienfeld, damit die LCDAnzeige in ihren vorherigen Zustand zurückkehrt. Drucken vom Computer nicht möglich ❏ Installieren Sie den Druckertreiber. ❏ Schließen Sie das USB-Kabel sicher am Drucker und am Computer an. ❏ Wenn Sie einen USB-Hub verwenden, verbinden Sie den Drucker direkt mit dem Computer.
Benutzerhandbuch Lösen von Problemen Wenn Sie keine Netzwerkeinstellungen vornehmen können ❏ Schalten Sie die Geräte ab, mit denen Sie eine Netzwerkverbindung herstellen möchten. Warten Sie etwa 10 Sekunden und schalten Sie die Geräte dann in folgender Reihenfolge ein: Zugangspunkt, Computer oder SmartGerät und dann den Drucker. Positionieren Sie Drucker und Computer oder Smart-Gerät näher am Zugangspunkt, um die Funkkommunikation zu erleichtern, und nehmen Sie die Netzwerkeinstellungen dann erneut vor.
Benutzerhandbuch Lösen von Problemen ❏ Eine Verbindung mit dem Access Point ist eventuell nicht möglich, wenn der Access Point mehrere SSIDs hat, und Geräte mit verschiedenen SSIDs desselben Access Points verbunden sind. Verbinden Sie den Computer oder das Smart-Gerät mit der gleichen SSID wie den Drucker. ❏ Ein Access Point, der sowohl IEEE802.11a als auch IEEE802.11g erfüllt, hat SSIDs mit 2,4 GHz und 5 GHz.
Benutzerhandbuch Lösen von Problemen Zugehörige Informationen & „Überprüfen der mit dem Drucker verbundenen SSID“ auf Seite 126 & „Prüfen der SSID für den Computer“ auf Seite 126 Überprüfen der mit dem Drucker verbundenen SSID Sie können die SSID durch Drucken eines Netzwerkverbindungsberichts, Netzwerkstatusblatt oder über Web Config prüfen. Prüfen der SSID für den Computer Windows Wählen Sie Systemsteuerung > Netzwerk und Internet > Netzwerk- und Freigabecenter.
Benutzerhandbuch Lösen von Problemen Der Drucker kann plötzlich nicht über eine Netzwerkverbindung drucken ❏ Wenn Sie Ihren Zugangspunkt oder Anbieter geändert haben, nehmen Sie die Netzwerkeinstellungen für den Drucker erneut vor. Verbinden Sie den Computer oder das Smart-Gerät mit der gleichen SSID wie den Drucker. ❏ Schalten Sie die Geräte ab, mit denen Sie eine Netzwerkverbindung herstellen möchten.
Benutzerhandbuch Lösen von Problemen Zugehörige Informationen & „Ändern der Verbindungsmethode mit einem Computer“ auf Seite 33 Drucken über iPhone oder iPad nicht möglich ❏ Verbinden Sie das iPhone oder iPad mit dem gleichen Netzwerk (SSID) wie der Drucker. ❏ Aktivieren Sie Papierkonfiguration in den folgenden Menüs. Einstellung > Druckereinstellungen > Papierquelleneinstl. > Papierkonfiguration ❏ Aktivieren Sie die Einstellung AirPrint in Web Config.
Benutzerhandbuch Lösen von Problemen Streifen oder unerwartete Farben erscheinen Die Druckkopfdüsen könnten verstopft sein. Drucken Sie ein Düsentestmuster, um zu überprüfen, ob Düsen verstopft sind. Reinigen Sie den Druckkopf, falls irgendeine der Druckkopfdüsen verstopft ist. Zugehörige Informationen & „Überprüfen und Reinigen des Druckkopfs“ auf Seite 90 Farbstreifen erscheinen in Abständen von etwa 2.
Benutzerhandbuch Lösen von Problemen Verschwommene Ausdrucke, vertikale Streifenbildung oder Fehlausrichtung Richten Sie den Druckkopf aus. Zugehörige Informationen & „Ausrichten des Druckkopfs“ auf Seite 93 Die Druckqualität wird auch nach der Druckkopfjustage nicht besser Bei bidirektionalem Druck oder Drucken mit hoher Geschwindigkeit bewegt sich der Druckkopf zum Drucken in beide Richtungen und es kann zu einer Fehlausrichtung von vertikalen Linien kommen.
Benutzerhandbuch Lösen von Problemen ❏ Drucken Sie nicht auf Papier, das feucht, beschädigt oder zu alt ist. ❏ Gewelltes Papier oder aufgeblähte Umschläge sollten Sie vorher plätten. ❏ Drucken Sie mit einer höheren Qualitätseinstellung. ❏ Stapeln Sie die Papierausdrucke nicht sofort nach dem Ausdrucken. ❏ Lassen Sie die Ausdrucke vollständig trocknen, bevor Sie sie archivieren oder anderen zeigen. Achten Sie darauf, dass beim Trocknen kein direktes Sonnenlicht auf die Ausdrucke fällt.
Benutzerhandbuch Lösen von Problemen ❏ Platzieren Sie das Papier auf einer flachen Oberfläche, um zu prüfen, ob es gewellt ist. Falls ja, pressen Sie es flach. ❏ Stellen Sie beim manuellen 2-seitigen Drucken sicher, dass die Tinte vollständig getrocknet ist, bevor Sie das Papier erneut einlegen.
Benutzerhandbuch Lösen von Problemen Position, Format oder Ränder der Druckausgabe sind falsch ❏ Legen Sie das Papier in der richtigen Richtung ein und schieben Sie die Papierführungsschienen bis an die Kanten des Papiers. ❏ Richten Sie beim Auflegen der Vorlagen auf das Vorlagenglas die Ecken der Vorlagen nach den Ecken aus, die durch ein Symbol auf dem Vorlagenglas angezeigt sind. Wenn die Ränder der Kopie abgeschnitten sind, verschieben Sie die Vorlage etwas aus der Ecke.
Benutzerhandbuch Lösen von Problemen Ungleichmäßige Farbverteilung, Schmierstellen, Flecken oder gerade Streifen im kopierten Bild ❏ Reinigen Sie die Papierzuführung. ❏ Reinigen Sie das Vorlagenglas. ❏ Drücken Sie nicht zu stark auf die Vorlage oder die Vorlagenabdeckung, wenn Sie die Vorlagen auf dem Vorlagenglas platzieren. ❏ Wenn das Papier verschmiert ist, verringern Sie die Kopierdichteeinstellung.
Benutzerhandbuch Lösen von Problemen Sonstige Druckprobleme Es wird zu langsam gedruckt ❏ Schließen Sie alle nicht benötigten Anwendungen. ❏ Verringern Sie die Qualitätseinstellung. Eine höhere Druckqualität beim Drucken verringert die Druckgeschwindigkeit. ❏ Aktivieren Sie die bidirektionale (oder Hochgeschwindigkeits-) Einstellung. Wenn diese Einstellung aktiviert ist, bewegt sich der Druckkopf zum Drucken in beide Richtungen, wodurch sich die Druckgeschwindigkeit erhöht.
Benutzerhandbuch Lösen von Problemen Scannen kann nicht gestartet werden ❏ Schließen Sie das USB-Kabel sicher am Drucker und am Computer an. Wenn Sie einen USB-Hub verwenden, verbinden Sie den Drucker direkt mit dem Computer. ❏ Wenn Sie über ein Netzwerk mit hoher Auflösung scannen, kann ein Kommunikationsfehler auftreten. Verringern Sie die Auflösung. ❏ Stellen Sie sicher, dass der richtige Drucker (Scanner) unter Epson Scan 2 gewählt wurde.
Benutzerhandbuch Lösen von Problemen Probleme mit gescannten Bildern Ungleichmäßige Farben, Schmutz, Flecken usw. erscheinen beim Scannen vom Vorlagenglas ❏ Reinigen Sie das Vorlagenglas. ❏ Befreien Sie das Original von jeglichem Schmutz und anderen Fremdkörpern. ❏ Drücken Sie nicht zu fest auf das Original oder die Dokumentenabdeckung. Wenn Sie zu fest drücken, können Verschwommenheit, Streifen und Flecken auftreten.
Benutzerhandbuch Lösen von Problemen Der Text ist unscharf ❏ Wählen Sie in Dokumentmodus in Epson Scan 2 die Registerkarte Erweiterte Einstellungen aus, und dann Bildoption > Text optimieren. ❏ Wählen Sie Dokumentmodus als Modus in Epson Scan 2. Scannen Sie mithilfe der Einstellungen für Dokumente in Dokumentmodus.
Benutzerhandbuch Lösen von Problemen Zugehörige Informationen & „Platzieren von Vorlagen auf dem Vorlagenglas“ auf Seite 42 Vorschau in Vorschaubild nicht möglich ❏ Bitte achten Sie beim Platzieren mehrerer Originale auf dem Vorlagenglas darauf, eine Lücke von mindestens 20 mm zwischen den Originalen einzuhalten. ❏ Prüfen Sie, ob das Original gerade ausgerichtet ist. ❏ Je nach Original kann die Vorschau in Vorschaubild möglicherweise nicht durchgeführt werden.
Benutzerhandbuch Lösen von Problemen 1. Starten Sie Epson Scan 2 Utility. ❏ Windows 10 Klicken Sie auf die Start-Schaltfläche und wählen Sie Alle Programme > EPSON > Epson Scan 2 Utility. ❏ Windows 8.1/Windows 8 Geben Sie den Namen der Anwendung in das Suche-Charm ein und wählen Sie anschließend das angezeigte Symbol. ❏ Windows 7/Windows Vista/Windows XP Klicken Sie auf die Start-Schaltfläche und wählen Sie Alle Programme oder Programme > EPSON > Epson Scan 2 > Epson Scan 2 Utility.
Benutzerhandbuch Lösen von Problemen Zugehörige Informationen & „Scannen mit Epson Scan 2“ auf Seite 75 Sonstige Probleme Leichter elektrischer Schlag beim Berühren des Druckers Wenn viele Peripheriegeräte mit dem Computer verbunden sind, besteht die Gefahr, beim Berühren des Druckers einen leichten elektrischen Schlag zu erhalten. Installieren Sie eine Erdungsleitung zum Computer, die mit dem Drucker verbunden ist.
Benutzerhandbuch Lösen von Problemen Zugehörige Informationen & „Spezifikation für unterstützte Daten“ auf Seite 147 Es erscheint eine Meldung mit der Aufforderung, den Tintenstand zurückzusetzen Füllen Sie alle oder die angegebenen Tintenbehälter auf, wählen Sie die aufgefüllte Farbe im LCD-Bildschirm und drücken Sie dann die Taste x, um die Tintenstände zurückzusetzen. Je nach Gebrauchsbedingungen wird die Meldung ggf. auch angezeigt, wenn noch Tinte im Behälter ist.
Benutzerhandbuch Anhang Anhang Technische Daten Druckerspezifikationen Anordnung der Druckkopfdüsen Düsen für schwarze Tinte: 180 Düsen für Farbtinte: 59 für jede Farbe Papiergewicht Normalpapier 64 bis 90 g/m2 (17 bis 24 lb) Umschläge Umschlag 10, DL, C6: 75 bis 90 g/m2 (20 bis 24 lb) Druckbereich Druckbereich bei Einzelblatt Die Druckqualität nimmt aufgrund des Druckermechanismus in den schattierten Bereichen ab. A 3.0 mm (0.12 Zoll) B 3.0 mm (0.12 Zoll) C 40.0 mm (1.57 Zoll) D 32.0 mm (1.
Benutzerhandbuch Anhang Fotoelektrisches Gerät CIS Maximale Vorlagengröße 216 x297 mm (8.5×11.
Benutzerhandbuch Anhang Funktionen BedienfeldVorgang Netzwerkdruck Unterstützt Anmerkungen Wi-FiEinrichtungsassistent ✓ - Push-Button-Setup (WPS) ✓ - PIN-Code-Einrichtung ✓ - WLAN Auto-Connect ✓ - Epson iPrintVerbindung - - Wi-Fi Direct-Einrichtung ✓ - Allgemeine Netzwerkeinrichtung - - Netzwerkverbindungsprüfung ✓ - Netzwerkstatus - - Druck von Netzwerkstatusblättern ✓ - WLAN deaktivieren ✓ - Wiederherstellen der Werkseinstellungen ✓ - Dateifreigabeeinrichtung ✓ N
Benutzerhandbuch Anhang Funktionen Netzwerk-Scan Anmerkungen Epson Scan 2 IPv4, IPv6 ✓ - Event Manager IPv4 ✓ - Epson Connect (In Cloud scannen) IPv4 - - AirPrint (Scannen) IPv4, IPv6 ✓ Mac OS X v10.9 oder höher - - ADF (Duplex) Faxen Unterstützt Senden von Faxen IPv4 - - Empfangen von Faxen IPv4 - - AirPrint (Fax-Ausgang) IPv4, IPv6 - Mac OS X v10.8 oder höher WLAN-Spezifikationen Standards IEEE802.
Benutzerhandbuch Anhang Technische Daten von externen Speichergeräten Technische Daten von unterstützten Speicherkarten Kompatible Speicherkarten Maximale Kapazitäten miniSD* 2 GB miniSDHC* 32 GB microSD* 2 GB microSDHC* 32 GB microSDXC* 64 GB SD 2 GB SDHC 32 GB SDXC 64 GB * Verwenden Sie einen für den Speicherkartensteckplatz passenden Adapter. Andernfalls könnte die Karte feststecken.
Benutzerhandbuch Anhang Abmessungen Abmessungen Lagerung ❏ Breite: 445 mm (17.5 Zoll) ❏ Tiefe: 304 mm (12.0 Zoll) ❏ Höhe: 169 mm (6.7 Zoll) Drucken ❏ Breite: 445 mm (17.5 Zoll) ❏ Tiefe: 528 mm (20.8 Zoll) ❏ Höhe: 303 mm (11.9 Zoll) Gewicht* * ca. 5.0 kg (11.0 lb) Ohne Tinte und Netzkabel. Elektrische Daten Nennspannung 100 bis 240 V Frequenzbereich 50 bis 60 Hz Nennstrom 0.5 bis 0.3 A Leistungsaufnahme (mit USBAnschluss) Unabhängiges Kopieren: Ca. 13.0 W (ISO/IEC24712) Bereit-Modus: Ca. 5.
Benutzerhandbuch Anhang Lagerung Temperatur: -20 bis 40 °C (-4 bis 104 °F)* Luftfeuchtigkeit: 5 bis 85 % RH (ohne Kondensierung) * Kann einen Monat bei 40 °C (104 °F) gelagert werden. Umgebungsbedingungen für Tintenflaschen Aufbewahrungstemperatur -20 bis 40 °C (-4 bis 104 °F)* Gefriertemperatur -15 °C (5 °F) Bei einer Temperatur von 25 °C (77 °F) dauert es etwa 2 Stunden, bis die Tinte aufgetaut und wieder verwendbar ist. * Kann einen Monat bei 40 °C (104 °F) gelagert werden.
Benutzerhandbuch Anhang Dieses Produkt entspricht Teil 15 der FCC-Regeln und RSS-210 der IC-Regeln. Epson übernimmt keine Verantwortung für die Nichtbeachtung der Schutzvorschriften, die durch eine nicht empfohlene Änderung des Produkts entsteht. Der Betrieb unterliegt den folgenden beiden Bedingungen: (1) dieses Gerät darf keine Störung verursachen, und (2) dieses Gerät muss alle empfangenen Störungen hinnehmen, einschließlich Störungen, die zu einem unbeabsichtigten Betrieb des Gerätes führen können.
Benutzerhandbuch Anhang Das Kopieren der folgenden Objekte ist gesetzlich verboten: ❏ Banknoten, Münzen, staatliche handelbare Wertpapiere, staatliche Schuldverschreibungen und Kommunalanleihen ❏ Unbenutzte Briefmarken, frankierte Postkarten und andere offizielle Postsachen mit gültiger Freimachung ❏ Staatliche Steuerzeichen und nach einem gesetzlichen Verfahren ausgegebene Wertpapiere Beim Kopieren der folgenden Dokumente ist Vorsicht angebracht: ❏ Private handelbare Wertpapiere (Börsenzertifikate, übertr
Benutzerhandbuch Anhang c Wichtig: ❏ Beim Lagern oder Transportieren darf der Drucker nicht gekippt, vertikal aufgestellt oder auf den Kopf gestellt werden. Anderenfalls kann Tinte austreten. ❏ Tintenflaschen nach dem Entfernen der Dichtung beim Aufbewahren oder Transportieren nicht kippen und keinen Stößen oder Temperaturschwankungen aussetzen. Andernfalls kann Tinte austreten, selbst wenn die Tintenflasche mit dem Deckel fest verschlossen ist.
Benutzerhandbuch Anhang 7. Öffnen Sie die Scannereinheit bei geschlossener Vorlagenabdeckung. Sichern Sie den Druckkopf mit Klebeband am Gehäuse. 8. Schließen Sie die Scannereinheit. 9. Bereiten Sie den Drucker wie nachfolgen gezeigt zum Einpacken vor.
Benutzerhandbuch Anhang 10. Achten Sie darauf, den Tintenbehälter mit dem Deckel sicher zu verschließen. 11. Packen Sie den Drucker unter Verwendung von Schutzmaterial in seinen Karton. Wenn Sie den Drucker wieder in Betrieb nehmen, achten Sie darauf, das den Druckkopf sichernde Klebeband vorher zu entfernen. Falls die Druckqualität beim nächsten Druck abgenommen hat, reinigen Sie den Druckkopf und richten Sie ihn aus.
Benutzerhandbuch Anhang Hinweis: Wenn Sie den Drucker ohne Software-CD oder Web Installer mit dem Netzwerk verbunden haben, ordnen Sie einen Speicherkarten-Steckplatz oder USB-Anschluss als Netzlaufwerk zu. Öffnen Sie Ausführen und geben Sie einen Druckernamen \\XXXXX oder die IP-Adresse \\XXX.XXX.XXX.XXX des Druckers bei Öffnen: ein. Rechtsklicken Sie auf ein Gerätesymbol, um das Netzwerk zuzuweisen. Das Netzwerkgerät wird unter Computer oder Arbeitsplatz angezeigt.
Benutzerhandbuch Anhang ❏ Seriennummer des Produkts (Das Typenschild mit der Seriennummer befindet sich in der Regel auf der Geräterückseite.) ❏ Produktmodell ❏ Softwareversion des Produkts (Klicken Sie auf About, Version Info oder eine ähnliche Schaltfläche in der Gerätesoftware.
Benutzerhandbuch Anhang Hilfe für Benutzer aus Neuseeland Epson New Zealand ist bestrebt, Ihnen einen hohen Kundendienststandard zu bieten. Zusätzlich zur Produktdokumentation bieten wir folgende Informationsquellen: Internet-URL http://www.epson.co.nz Besuchen Sie die Webseiten von Epson New Zealand.