User manual

Lancaster

short.bk Rev.C

A5 size SETUP.FM

2/5/99 Pass 3

Proof Sign-off:

Y.Yano _______

N.Nomoto _______

K.Pipa _______

Connecting the Printer to Your PC

To connect the printer to your computer using its built-in parallel

interface, you need a shielded, twisted-pair parallel cable.

Note:

If you plan to connect with a USB cable, follow the instructions in the

USB User’s Guide that came with your printer.

Follow these steps to connect your printer.

1. Make sure both the printer and computer are turned off.

2. Plug the cable connector securely into the printer's interface

connector. Then squeeze the wire clips together until they lock

in place on both sides. If your cable has a ground wire, connect

it to the ground connector below the interface connector.

3. Plug the other end of the cable into the computer's parallel

interface. If there is a ground wire at the computer end of the

cable, connect it to the ground connector at the back of the

computer.

Now see the next section for instructions on installing the printer

software in your computer. You must install this software before

using your printer.