User manual

Lancaster

short.bk Rev.C

A5 size SETUP.FM

2/5/99 Pass 3

Proof Sign-off:

Y.Yano _______

N.Nomoto _______

K.Pipa _______

Selecting Your Printer in the Chooser

After you install the printer software, you need to open the

Chooser to select your printer. You have to choose the printer the

first time you use it or whenever you want to switch to another

printer. Your Macintosh will always print using the last printer

selected.

If you are using your computer’s serial or USB interface, choose

your printer driver as described in the following section, “Using

a serial or USB interface connection” on page 29. If your system

is connected to an AppleTalk network, see “Using the AppleTalk

connection” on page 31.

Note:

If you are using a Macintosh Quadra 950 or 900, you need to choose

Compatible

in the Serial Switch dialog box before selecting your

printer from the Chooser. To open the Serial Switch dialog box, choose

Control Panel

from the Apple menu, then choose

Serial Switch

Using a serial or USB interface connection

1. Make sure the printer is connected to your Macintosh and is

turned on.