users manual

214
5. Select Head Cleaning.
6. Select Start to clean the print head. You see a message on the LCD screen during the cleaning
cycle.
Caution: Never turn off the product or open the printer cover during a cleaning cycle or you may not
be able to print.
When the cleaning cycle is finished, you see a message on the LCD screen.
7. Select Check.
8. Select Print to run a nozzle check and confirm that the print head is clean.
If you don’t see any improvement after cleaning the print head up to 3 times, turn off the product and wait
at least 12 hours. Then try cleaning the print head again. If quality still does not improve, run a Power
Cleaning. If there is still no improvement, contact Epson support.
Parent topic: Print Head Cleaning
Related references
Where to Get Help
Related tasks
Refilling the Ink Tanks
Checking the Nozzles Using the Product Control Panel
Loading Paper in the Cassette