User Manual

6. Enter your Wi-Fi Direct password.

Note: Your password must be at least 8 and no more than 22 characters long.

• To scroll through the characters, press the up or down arrow button.

• To move the cursor to the right, press the right arrow button.

• To change the character case or type, press the reset button.

• To delete the previous character, press the left arrow button.

• When you finish entering characters, press the OK button.

7. Press the OK button.

8. Use your computer or wireless device to select the Wi-Fi network name (SSID) displayed on the

LCD screen, then enter the password shown.

Note: Make a note of the SSID and password that appear.

9. Press the OK button to exit.

You see either an AP or D connection symbol on the LCD screen and should be able to connect to

your product directly from your computer or device, and then print.

Note: If the AP or D connection symbol is not displayed in blue on the LCD screen, Wi-Fi Direct

mode is not enabled. Repeat these steps to try again.