User Manual
Table Of Contents
- Copyrights and Trademarks
- Contents
- Notes on Manuals
- Introducing the Software
- Basic Operations
- Using the Optional Hard Disk Unit
- Using the Printer Driver(Windows)
- Using the Printer Driver(Mac)
- Printing Varieties
- Printing with Darker Tones of Black (Black Enhance Overcoat)
- Correct color and print
- Printing Black and White Photos
- Borderless Printing
- Enlarged/Reduced Printing
- Multi-Page Printing
- Poster Printing (Enlarge to cover several sheets and print - Windows only)
- Printing at Non-Standard Sizes
- Banner printing (on roll paper)
- Layout Manager(Windows Only)
- Color Management Printing
- Menu List
- Maintenance
- Problem Solver
- What to do When a Message is Displayed
- SpectroProofer Error
- When an Error Message and Error Code are Displayed
- Troubleshooting
- You cannot print (because the printer does not work)
- The printer does not turn on.
- The printer turns off automatically.
- The printer driver is not installed properly (Windows).
- The printer driver is not installed properly (Mac).
- The printer is not communicating with the computer.
- You cannot print under the network environment.
- The printer has an error.
- The printer stops printing.
- Your problem is not listed here.
- The printer sounds like it is printing, but nothing prints
- The prints are not what you expected
- Print quality is poor, uneven, too light, or too dark.
- The color is not exactly the same as another printer.
- I am worried about the print quality at the leading edge of the paper
- The print is not positioned properly on the media.
- Vertical ruled lines are misaligned.
- The printed surface is scuffed or soiled.
- Cleaning around the print head and caps
- The paper is creased.
- Print outs are wrinkled
- The reverse side of the printed paper is soiled.
- Too much ink is fired.
- Margins appear in borderless printing.
- Feeding or ejecting problems
- Others
- The control panel display keeps turning off.
- Color ink runs out quickly even when printing in the Black&White mode or when printing black data.
- The paper is not cut cleanly.
- A light is visible inside the printer.
- The administrator password has been lost
- Head cleaning is performed automatically
- The noise made by the drying fan during color measurement is slightly louder than in previous models.
- When an error occurs during color measurement (when using the SpectroProofer mounter), the colors do ...
- Cannot update the firmware for the printer
- Printing stops when printing in a VPN (Virtual Private Network) environment
- The printer turned off due to a power cut
- You cannot print (because the printer does not work)
- Appendix
- Where To Get Help
- Technical Support Web Site
- Contacting Epson Support
- Before Contacting Epson
- Help for Users in North America
- Help for Users in Europe
- Help for Users in Taiwan
- Help for Users in Australia/New Zealand
- Help for Users in Singapore
- Help for Users in Thailand
- Help for Users in Vietnam
- Help for Users in Indonesia
- Help for Users in Hong Kong
- Help for Users in Malaysia
- Help for Users in India
- Help for Users in the Philippines
You can check the status of the wired LAN
connection and change settings.
H Switch screens while printing
You can switch the screen display while printing.
You can switch to the Professional display (shown
above) that shows the remaining ink level, or the
Simple display that shows the print completion time.
I Internal lighting
You can turn the internal lighting on or off. Turn on
the internal light when you want to check the print as
it is being printed.
J Feed/Cut Paper
When roll paper is loaded, you can perform paper
feed adjustments and cut the paper.
Features
The main features of this printer are described below.
Realizing High Resolution
The newly developed ink technology provides high
definition for photo, fine art, and proofing paper.
New print head design
Our new print heads are equipped with a 2.64 inch
integrated precision core μTFP head with a staggered
array, and we have adopted a resolution of 300 dpi for
optimal printing.
Pigmented inks with superior
resistance
Pigment inks maintain more beautiful and more vibrant
prints over a long period of time with their high light
fastness. They are also extremely fade-resistant and can
be safely displayed in direct sunlight. Additionally, the
high water and ozone resistance is not only ideal for
photo printing, but also allows for store displays and
banners, outdoor displays of posters and so on. When
you are printing for outdoor use, use lamination
processing.
A variety of black and color inks
As well as the five basic ink colors, inks with the
following features have also been included.
Two types of black ink to suit your
printing purposes
By automatically switching to suit the paper type being
used, the two types of black ink provided are Photo
Black which realizes a smooth, professional finish on
glossy paper, and Matte Black which increases black
optical density using matte paper.
Two types of gray ink to improve
gradation
In addition to Photo Black and Matte Black, two
additional variants of black ink have also been installed
(Gray and Light Gray) to provide excellent granularity
and richly expressive gradation.
SC-P9500 Series/SC-P7500 Series User's Guide
Notes on Manuals
12