User Manual
Table Of Contents
- Copyrights and Trademarks
- Contents
- Notes on Manuals
- Introducing the Software
- Basic Operations
- Using the Optional Hard Disk Unit
- Using the Printer Driver(Windows)
- Using the Printer Driver(Mac)
- Printing Varieties
- Printing with Darker Tones of Black (Black Enhance Overcoat)
- Correct color and print
- Printing Black and White Photos
- Borderless Printing
- Enlarged/Reduced Printing
- Multi-Page Printing
- Poster Printing (Enlarge to cover several sheets and print - Windows only)
- Printing at Non-Standard Sizes
- Banner printing (on roll paper)
- Layout Manager(Windows Only)
- Color Management Printing
- Menu List
- Maintenance
- Problem Solver
- What to do When a Message is Displayed
- SpectroProofer Error
- When an Error Message and Error Code are Displayed
- Troubleshooting
- You cannot print (because the printer does not work)
- The printer does not turn on.
- The printer turns off automatically.
- The printer driver is not installed properly (Windows).
- The printer driver is not installed properly (Mac).
- The printer is not communicating with the computer.
- You cannot print under the network environment.
- The printer has an error.
- The printer stops printing.
- Your problem is not listed here.
- The printer sounds like it is printing, but nothing prints
- The prints are not what you expected
- Print quality is poor, uneven, too light, or too dark.
- The color is not exactly the same as another printer.
- I am worried about the print quality at the leading edge of the paper
- The print is not positioned properly on the media.
- Vertical ruled lines are misaligned.
- The printed surface is scuffed or soiled.
- Cleaning around the print head and caps
- The paper is creased.
- Print outs are wrinkled
- The reverse side of the printed paper is soiled.
- Too much ink is fired.
- Margins appear in borderless printing.
- Feeding or ejecting problems
- Others
- The control panel display keeps turning off.
- Color ink runs out quickly even when printing in the Black&White mode or when printing black data.
- The paper is not cut cleanly.
- A light is visible inside the printer.
- The administrator password has been lost
- Head cleaning is performed automatically
- The noise made by the drying fan during color measurement is slightly louder than in previous models.
- When an error occurs during color measurement (when using the SpectroProofer mounter), the colors do ...
- Cannot update the firmware for the printer
- Printing stops when printing in a VPN (Virtual Private Network) environment
- The printer turned off due to a power cut
- You cannot print (because the printer does not work)
- Appendix
- Where To Get Help
- Technical Support Web Site
- Contacting Epson Support
- Before Contacting Epson
- Help for Users in North America
- Help for Users in Europe
- Help for Users in Taiwan
- Help for Users in Australia/New Zealand
- Help for Users in Singapore
- Help for Users in Thailand
- Help for Users in Vietnam
- Help for Users in Indonesia
- Help for Users in Hong Kong
- Help for Users in Malaysia
- Help for Users in India
- Help for Users in the Philippines
Borderless Printing Not supported
Auto Color Measurement Device Mounter Available for all paper widths.
Auto Take-up Reel Unit Paper that is 329 mm/13 inches wide is not supported.
Printed side out and printed side in winding is available for other paper widths.
Singleweight Matte Paper
Paper Thickness 0.14 mm
Roll core size 2 inches
Paper Type (printer driver) Singleweight Matte
Type of black ink Matte Black (MB)
ICC profile EPSON_SC-P9500_7500_SingleweightMattePaper.icc
Paper Width 419 mm/16.5 inches
432 mm/17 inches
610 mm/24 inches
914 mm/36 inches
*
1118 mm/44 inches
*
* SC-P7500 Series is not supported.
Borderless Printing Paper that is 419 mm/16.5 inches wide is not supported.
Available for other paper widths.
Auto Color Measurement Device Mounter Not supported
Auto Take-up Reel Unit Printed out side winding is available for all paper widths.
However, for 610 mm/24 inch, 914 mm/36 inch, and 1,118 mm/44 inch paper, you
need to use the tensioner attached to the auto take-up reel unit.
Doubleweight Matte Paper
Thickness 0.21 mm
Roll core size 2 inches
Paper Type (printer driver) Doubleweight Matte
Type of black ink Matte Black (MB)
ICC profile EPSON_SC-P9500_7500_DoubleweightMattePaper.icc
Paper Width 610 mm/24 inches
914 mm/36 inches
*
1118 mm/44 inches
*
* SC-P7500 Series is not supported.
Borderless Printing Available for all paper widths.
Auto Color Measurement Device Mounter Available for all paper widths.
However, color measurement accuracy is not guaranteed.
Auto Take-up Reel Unit Printed out side winding is available for all paper widths.
SC-P9500 Series/SC-P7500 Series User's Guide
Appendix
160