User's Guide NPD6353-01 EN
Contents Paper Size and Type Settings. . . . . . . . . . . . . . . .27 Loading Paper in the Rear Paper Feeder. . . . . . . 29 Loading Paper in the Front Paper Feeder. . . . . . .31 Loading Roll Paper. . . . . . . . . . . . . . . . . . . . . . .33 Loading a CD/DVD. . . . . . . . . . . . . . . . . . . . . . . . 35 Printable CD/DVDs. . . . . . . . . . . . . . . . . . . . . . 35 CD/DVD Handling Precautions. . . . . . . . . . . . . 35 Loading a CD/DVD. . . . . . . . . . . . . . . . . . . . . .
Installing or Uninstalling Applications Separately. 106 Installing the Applications Separately. . . . . . . . 106 Adding the Printer (for Mac OS Only). . . . . . . .109 Uninstalling Applications. . . . . . . . . . . . . . . . . 109 Updating Applications and Firmware. . . . . . . . 110 Transporting and Storing the Printer. . . . . . . . . . . 111 Adding or Replacing the Computer or Devices Connecting to a Printer that has been Connected to the Network. . . . . . . . . . . . . . . . . .
Printer Settings. . . . . . . . . . . . . . . . . . . . . . . . 203 Basic Settings. . . . . . . . . . . . . . . . . . . . . . . . . . 204 Network Settings. . . . . . . . . . . . . . . . . . . . . . . 205 Web Service Settings. . . . . . . . . . . . . . . . . . . . 206 Customer Research. . . . . . . . . . . . . . . . . . . . . 207 Restore Default Settings. . . . . . . . . . . . . . . . . . 207 Printer Status/Print. . . . . . . . . . . . . . . . . . . . . 207 Firmware Update. . . . . . . . . . . . . . . . . .
Guide to This Manual Introduction to the Manuals. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6 Guide to Video Manuals. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6 Searching for Information. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6 Printing Only the Pages You Need. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7 About This Manual. . . . . . .
Guide to This Manual > Searching for Information Introduction to the Manuals The following manuals are supplied with your Epson printer. As well as the manuals, check the various types of help information available from the printer itself or from the Epson software applications. ❏ Start Here (paper manual) Provides you with information on setting up the printer, installing the software, using the printer, solving problems, and so on.
Guide to This Manual > About This Manual > Marks and Symbols Jumping directly from bookmarks Click a title to jump to that page. Click + or > to view the lower level titles in that section. To return to the previous page, perform the following operation on your keyboard. ❏ Windows: Hold down Alt. and then press ←. ❏ Mac OS: Hold down the command key, and then press ←. Printing Only the Pages You Need You can extract and print only the pages you need.
Guide to This Manual > Trademarks c Important: Instructions that must be observed to avoid damage to your equipment. Note: Provides complementary and reference information. Related Information & Links to related sections. Notes on Screenshots and Illustrations ❏ Screenshots of the printer driver are from Windows 10 or macOS High Sierra. The content displayed on the screens varies depending on the model and situation. ❏ Illustrations used in this manual are examples only.
Guide to This Manual > Copyright ❏ Use of the Works with Apple badge means that an accessory has been designed to work specifically with the technology identified in the badge and has been certified by the developer to meet Apple performance standards. ❏ Chrome, Google Play, and Android are trademarks of Google LLC. ❏ Adobe, Adobe RGB, Lightroom, Photoshop, and Photoshop Elements are either registered trademarks or trademarks of Adobe Systems Incorporated in the United States and/or other countries.
Important Instructions Safety Instructions. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11 Printer Advisories and Warnings. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12 Protecting Your Personal Information. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Important Instructions > Safety Instructions > Safety Instructions for Ink Safety Instructions Read and follow these instructions to ensure safe use of this printer. Make sure you keep this manual for future reference. Also, be sure to follow all warnings and instructions marked on the printer. ❏ Some of the symbols used on your printer are to ensure safety and proper use of the printer. Visit the following Web site to learn the meaning of the symbols. http://support.epson.
Important Instructions > Printer Advisories and Warnings > Advisories and Warnings for Using the Printer Printer Advisories and Warnings Read and follow these instructions to avoid damaging the printer or your property. Make sure you keep this manual for future reference. Advisories and Warnings for Setting Up the Printer ❏ Do not block or cover the vents and openings in the printer.
Important Instructions > Printer Advisories and Warnings > Advisories and Warnings for Transporting or Stori… ❏ Always turn the printer off using the P button. Do not unplug the printer or turn off the power at the outlet until the P light stops flashing. ❏ If you are not going to use the printer for a long period, be sure to unplug the power cord from the electrical outlet.
Important Instructions > Protecting Your Personal Information Protecting Your Personal Information When you give the printer to someone else or dispose of it, erase all the personal information stored in the printer's > General Settings > Restore Default Settings > Clear All Data and Settings on the memory by selecting control panel.
Part Names and Functions Front. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16 Rear. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Part Names and Functions > Front Front A Rear paper feeder Loads paper. B Edge guide Feeds the paper straight into the printer. Slide to the edges of the paper. C Printer cover Open to replace the ink cartridges or to remove jammed paper. D Front cover Open when sliding out the front paper feeder and output tray or replacing the maintenance box. E Edge guide Feeds the paper straight into the printer. Slide to the edges of the paper.
Part Names and Functions > Rear Rear SC-P900 Series A LAN port Connects a LAN cable. B USB port Connects a USB cable. C Port cover Open to connect a USB cable or LAN cable. See the related information link below for details on how to open the cover. “Opening the Port Cover” on page 18 D AC inlet Connects the power cord. E Rear cover Open to install the optional roll paper unit. SC-P700 Series A LAN port Connects a LAN cable. B USB port Connects a USB cable.
Part Names and Functions > Rear > Opening the Port Cover D AC inlet Connects the power cord. E Roll paper unit Loads roll paper. F Rear cover Open to load roll paper. G Edge guide Feeds the paper straight into the printer. Slide to the edges of the paper. Opening the Port Cover Open the rear paper feeder and then open the port cover.
Guide to the Control Panel Home Screen Configuration. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20 Switching the Screen View. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22 Entering Characters. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Guide to the Control Panel > Home Screen Configuration Home Screen Configuration A Displays the Menu screen. You can make settings related to printer features and operations. B Displays the Print Information Sheet screen. You can check the last 12 print histories. For example, if you print three copies of a photo, the printer saves three print histories. See the related link information for details on how to print the photo information sheet.
Guide to the Control Panel > K Home Screen Configuration > Guide to the Network Icon You can eject paper that has been loaded. The following can be performed when roll paper is loaded. ❏ Move roll paper to the cutting position. ❏ Eject paper after moving the roll paper to the cutting position. ❏ Eject roll paper L Displays the Paper Setting screen. You can select the paper size and paper type by selecting Paper Setting when paper is loaded.
Guide to the Control Panel > Switching the Screen View The printer is connected to a wireless (Wi-Fi) network. The number of bars indicates the signal strength of the connection. The more bars there are, the stronger the connection. The printer is not connected to a wireless (Wi-Fi) network in Wi-Fi Direct (Simple AP) mode. The printer is connected to a wireless (Wi-Fi) network in Wi-Fi Direct (Simple AP) mode.
Guide to the Control Panel > Switching the Screen View Displays thumbnails of images when you print using the printer driver and Epson Print Layout. Print status display mode Displays ink levels and a progress bar when printing. Print setting display mode Displays print settings for the printer driver and Epson Print Layout.
Guide to the Control Panel > Entering Characters Entering Characters You can enter characters and symbols by using on-screen keyboard when you make network settings, and so on. A Indicates the character count. B Moves the cursor to the input position. C Switches between upper case and lower case or numbers and symbols. D Switches the character type. : You can enter numbers and symbols. : You can enter letters. E Enters frequently used email domain addresses or URLs by simply selecting the item.
Loading Papers and CD/DVDs Loading Paper. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 26 Loading a CD/DVD. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Loading Papers and CD/DVDs > Loading Paper > Paper Handling Precautions Loading Paper Paper Handling Precautions Note the following points when handling and storing the paper. If the paper is not in good condition, print quality may decline. Check the manuals supplied with each paper. Handling Precautions ❏ Use Epson special media under normal room conditions (temperature: 15 to 25˚C; humidity: 40 to 60%). ❏ Do not fold the paper or scratch the surface of the paper.
Loading Papers and CD/DVDs > Loading Paper > Paper Size and Type Settings Note: Typically, print outs and photos fade over time (color distortion) due to the effects of light and various constituents in the air. This also applies to Epson special media. However, with the correct storage method, the degree of color distortion can be minimized. ❏ See the manuals supplied with Epson special media for detailed information on handling the paper after printing.
Loading Papers and CD/DVDs > Loading Paper > Paper Size and Type Settings sure you are not printing on the wrong paper size or printing in the wrong color due to using settings that do not match the paper type. If displayed paper size and type differ from the loaded paper, select the item to change. If the settings match the loaded paper, close the screen. List of Paper Types To obtain optimum printing results, select the paper type that suits the paper.
Loading Papers and CD/DVDs > Media Name Loading Paper > Loading Paper in the Rear Paper Feeder Media Type Control Panel Printer Driver Premium Semimatte Photo Paper (260) Prem. Semigloss Epson Premium Semigloss Enhanced Matte Paper Archival Matte Epson Archival Matte Plain Paper (cut sheets) Plain paper Plain Paper / Bright White Paper Loading Paper in the Rear Paper Feeder 1. Open and slide out the rear paper feeder to its maximum position.
Loading Papers and CD/DVDs > Loading Paper > Loading Paper in the Rear Paper Feeder 2. Slide out the edge guides. 3. Load paper with the printable side facing up. 4. Slide the parts of the edge guides indicated by (a) to the edges of the paper. 5. The paper setting screen is displayed on the printer's control panel. Select the paper size and paper type and then select OK. When using commercially available paper other than genuine Epson paper, select the paper type that closest to that paper.
Loading Papers and CD/DVDs > Loading Paper > Loading Paper in the Front Paper Feeder Note: If you have registered paper information to your printer, the printer informs you if the registered information and the print settings differ. This prevents you from making the misprints. > General Settings > Printer Settings, and then disable the Paper If you have not used the register function, select Setup Auto Display setting. If you disable this setting, some functions will be unavailable.
Loading Papers and CD/DVDs > Loading Paper > Loading Paper in the Front Paper Feeder Paper sticks out from the rear of the printer when it is loaded from the front paper feeder. Leave a space (A) between the rear of the printer and the nearest wall as shown in the figure. SC-P900 Series: 405 mm or above SC-P700 Series: 330 mm or above c Important: ❏ An error may occur if you perform the following operations during initialization movement. - Extend the front paper feeder. - Load poster board.
Loading Papers and CD/DVDs > 3. Loading Paper > Loading Roll Paper Pull out the front paper feeder by referring to the animations displayed on the screen. Load paper by referring to the animations displayed on the screen. 4. The paper setting screen is displayed on the printer's control panel. Select the paper size and paper type and then select OK. When using commercially available paper other than genuine Epson paper, select the paper type that closest to that paper.
Loading Papers and CD/DVDs > Loading Paper > Loading Roll Paper 2. Select Roll Paper. 3. Pull out the roll paper unit by referring to the animations displayed on the screen. Load the roll paper by referring to the animations displayed on the screen. 4. The paper setting screen is displayed on the printer's control panel. Select the paper size and paper type and then select OK. When using commercially available paper other than genuine Epson paper, select the paper type that closest to that paper.
Loading Papers and CD/DVDs > 2. Loading a CD/DVD > CD/DVD Handling Precautions Select Cut and Eject. The roll paper is moved to the cutting position. 3. Cut the ejected paper using scissors. 4. Select Done. 5. Open the roll paper unit. (Only for SC-P900 Series users) 6. Remove the roll paper. Loading a CD/DVD Printable CD/DVDs You can print on a circular 12-cm CD/DVD labelled as suitable for printing, for example "printable on the label surface" or "printable with ink jet printers.
Loading Papers and CD/DVDs > Loading a CD/DVD > Loading a CD/DVD ❏ If the disc tray or the internal transparent compartment are accidentally printed on, immediately wipe off the ink. ❏ Depending on the print area setting, the CD/DVD or disc tray may get dirty. Make settings to print on the printable area. ❏ You can set the print range for the CD/DVD to a minimum of 18 mm for the inner diameter, and a maximum of 120 mm for the outer diameter.
Loading Papers and CD/DVDs > Loading a CD/DVD > Removing a CD/DVD 2. Select Disc Tray. 3. Pull out the front paper feeder by referring to the animations displayed on the screen. Load the CD/DVD by referring to the animations displayed on the screen. Related Information & “Available Paper and Capacities” on page 180 Removing a CD/DVD 1. When the disk tray is ejected after printing, hold the end of the tray and pull it straight out.
Loading Papers and CD/DVDs > 2. Store the front paper feeder. 3. Close the front cover. Loading a CD/DVD > Removing a CD/DVD c Important: After printing is finished, make sure you remove the disk tray. If you do not remove the tray and turn the printer on or off, or run head cleaning, the disk tray will strike the print head and may cause the printer to malfunction. Note: Select Remove on the printer's control panel to remove the disk tray without printing.
Printing Printing Photos. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .40 Printing Documents. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 67 Printing Using a Cloud Service. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Printing > Printing Photos > Tips when Printing Photo Projects Printing Photos Tips when Printing Photo Projects This section explains important points to note when creating photo projects. Shooting (Camera Settings) Creating a photo project begins with shooting. The data storage format and size (resolution) are also important points. Some items only need to be set for the first time, while some items need to be set every time according to the subject.
Printing > Printing Photos > Printing with Epson Print Layout ❏ Maintain a rich gradation and do not increase the intensity of red and yellow. ❏ Adjust the black level and create a sharp photo. Printing (Selecting the Paper and Print Settings Correctly) You can create more attractive photos by selecting paper that suits the subject of the photo. Most people think that glossy paper is the best for printing all photos, but there other textures available such as semigloss and matte paper.
Printing > Printing Photos > Printing with Epson Print Layout Summary of Epson Print Layout Epson Print Layout is an application that allows you to print retouched or developed photos in a few easy steps. It can also be used as a plug-in for Adobe Photoshop, Adobe Lightroom, Nikon ViewNX-i, and SILKYPIX. See the Epson Print Layout manual for details on supported applications and data formats. You can download Epson Print Layout from the Epson Web site.
Printing > C Printing Photos > Printing with Epson Print Layout Set the print layout. You can also select multiple photo templates and special layouts. Template Panorama Gallery Wrap D Select the color management method or Advanced B&W Photo print mode. Making Print Settings This section explains the procedure for printing one photo using a standard layout. 1. Start Epson Print Layout. This section explains the procedure for starting directly from the photo to be printed.
Printing > Printing Photos > Printing with Epson Print Layout ❏ Windows Right-click the photo and select Send to > Epson Print Layout. ❏ Mac OS Click the photo to be printed while holding down the Ctrl key, and then select Open With > Epson Print Layout. 2. Set the paper information and print quality from Printer Settings. Make sure that your printer is selected and select the correct paper type, size, and paper source.
Printing > Printing Photos > Printing with Epson Print Layout Select Standard as the print quality. Standard is the mode with the best balance between image quality and speed. 3. Set the print layout in Layout Settings. A Select Standard. B ❏ When performing borderless printing Select Borderless and Scale to Fit. ❏ When adding a margin Clear both checkboxes, and then set the following margin. C ❏ Select Center. ❏ Select Image Size or Margins and adjust the margin size.
Printing > 4. Printing Photos > Printing with Epson Print Layout Set the color management method from Color Settings. Set one of the following methods, and then click Print. ❏ Manage color using the printer driver (this uses the recommended setting to make the best of the printer color gamut*) *Use the following setting method when using paper added in Epson Media Installer: Manage color using an application. A Select Printer Manages Color. B Select Auto Select.
Printing > Printing Photos > Printing with Epson Print Layout Depending on the paper selected in Media Type from Printer Settings, Advanced B&W Photo may not be displayed. 1. Select Advanced B&W Photo from Type in Color Settings. 2. Make any necessary detailed settings, and then click Print.
Printing > A Printing Photos > Printing Using the Application and Printer Driver Color Toning: Select your favorite black from the following four types. ❏ Neutral: Standard black ❏ Cool: Bluish black ❏ Warm: Reddish black ❏ Sepia: Brownish with a retro texture Tone: You can adjust the modulation of black and white. B You can adjust the black tone. ❏ When you make an adjustment, Color Toning above changes to Fine Adjustment.
Printing > Printing Photos > Printing Using the Application and Printer Driver Select Color Management, and then select Photoshop Manages Colors from Color Handling. Select the ICC profile of the paper from Printer Profile and click Printer Preferences. 2. Display the printer driver's setting screen. 3. Make the following settings on the Main tab. ❏ Media Type: Select the paper name corresponding to the ICC profile selected as the Printer Profile in step 1. ❏ Mode: Select Off (No Color Adjustment).
Printing > Printing Photos > Printing Using the Application and Printer Driver Application Color Management Settings Other applications No Color Management Note: For information on the operating systems supported by each application, visit the distributor’s website. Setting example for Adobe Photoshop Elements 2020 Click More Options on the print screen. Select Color Management, and then select Printer Manages Colors from Color Handling.
Printing > 3. Printing Photos > Printing Using the Application and Printer Driver If you displayed the Color Controls screen in step 2, make settings for each item. See the printer driver help for more details on each item. Note: You can adjust values while checking the sample image on the left of the screen. You can also make fine adjustments to the color balance by using the color circle. 4. Check other settings, and then start printing.
Printing > Printing Photos > Printing Using the Application and Printer Driver Select Color Management, and then select Photoshop Manages Colors from Color Handling. Select the ICC profile of the paper from Printer Profile, click OK, and then click Print on the print screen. 2. On the printer driver's print dialog, select Print Settings from the pop-up menu. 3. Make the following settings.
Printing > Printing Photos > Printing Varieties (Windows) Setting example for Adobe Photoshop Elements 2020 Click More Options on the print screen. Select Color Management, and then select Printer Manages Colors from Color Handling. Make a note of what is displayed in the Image Space, click OK, and then click Print on the print screen. 2. On the printer driver's print dialog, select Color Matching from the pop-up menu, and then click EPSON Color Controls.
Printing > Printing Photos > Printing Varieties (Windows) Note: It is recommended that you use images with a color space of sRGB. 1. When using applications featuring a color management function, specify how to adjust colors from these applications. When using applications without a color management function, start from step 2. Depending on the type of the application, make the settings following the table below.
Printing > Printing Photos > Printing Varieties (Windows) Printing with Auto Color Correction The printer driver for this printer comes with the Epson proprietary function PhotoEnhance that makes the most efficient use of the color reproduction area, corrects image data to improve colors before printing. By using PhotoEnhance, you can correct photo colors to match the subject types such as people, scenery, or night view. You can print color data in sepia or black and white.
Printing > 3. Printing Photos > Printing Varieties (Windows) On the PhotoEnhance screen, you can set effects to apply to the print data. See the printer driver help for more details on each item. 4. Check other settings, and then start printing. Printing Banners You can print banners and panoramic pictures if you create and set print data for banner printing in your application.
Printing > Printing Photos > Printing Varieties (Windows) Image effects for black enhance overcoat Note: Enabling black enhance overcoat increases black density, and disabling it increases print speed. 1. When using applications featuring a color management function, specify how to adjust colors from these applications. When using applications without a color management function, start from step 2. Depending on the type of the application, make the settings following the table below.
Printing > 2. Printing Photos > Printing Varieties (Mac OS) Make sure that Black Enhance Overcoat is selected as the Level on the printer driver's Main tab. Black Enhance Overcoat is automatically enabled when anything other than Standard is selected as the Level. 3. If you want to further increase black density, select Max Quality (Carbon Black) as the Level. 4. Check other settings, and then start printing.
Printing > 1. Printing Photos > Printing Varieties (Mac OS) When using applications featuring a color management function, specify how to adjust colors from these applications. When using applications without a color management function, start from step 2. Depending on the type of the application, make the settings following the table below.
Printing > Printing Photos > Printing Varieties (Mac OS) By using PhotoEnhance, you can correct photo colors to match the subject types such as people, scenery, or night view. You can print color data in sepia or black and white. Colors are automatically corrected simply by selecting the print mode. Note: It is recommended that you use images with a color space of sRGB. 1. When using applications featuring a color management function, specify how to adjust colors from these applications.
Printing > 5. Printing Photos > Printing Varieties (Mac OS) Check other settings, and then start printing. Printing Banners You can print banners and panoramic pictures if you create and set print data for banner printing in your application. To print banners, select Roll Paper as the Paper Source in the printer driver. You can print data created by document preparation software, image editing software, and so on.
Printing > Printing Photos > Printing Varieties (Mac OS) Image effects for black enhance overcoat Note: Enabling black enhance overcoat increases black density, and disabling it increases print speed. 1. When using applications featuring a color management function, specify how to adjust colors from these applications. When using applications without a color management function, start from step 2. Depending on the type of the application, make the settings following the table below.
Printing > 3. Printing Photos > Printing Using Epson Photo+ Select Black Enhance Overcoat. If the check box is grayed out, move the slider for the quality level to Speed to enable the check box. 4. If you want to further increase black density, select Max Quality (Carbon Black) as the Print Quality. 5. Check other settings, and then start printing.
Printing > Printing Photos > Printing Using Epson Photo+ 1. Select a menu according to your needs. 2. Select the template or paper size depending on the selected menu.
Printing > Printing Photos > Printing Using Epson Photo+ 3. Select the photo you want to print. 4. Edit and print. You can perform the following edits.
Printing > Printing Photos > Printing Information About Photo Printing Printing Information About Photo Printing Photo print information for the last 12 sheets is saved in the printer. For example, if you print three copies of a photo, the printer saves three print histories. You can print photo information by selecting the information you want to print. However, information about photo printing is deleted when the printer is turned off. Thumbnails and print setting are printed for each photo.
Printing > Printing Documents > Printing from a Computer - Windows Printing Documents Printing from a Computer - Windows Printing Using Easy Settings Note: Operations may differ depending on the application. See the application's help for details. 1. Load paper in the printer. 2. Open the file you want to print. 3. Select Print or Print Setup from the File menu. 4. Select your printer.
Printing > Printing Documents > Printing from a Computer - Windows 5. Select Preferences or Properties to access the printer driver window. 6. Change the settings as necessary. See the menu options for the printer driver for details. Note: ❏ You can also see the online help for explanations of the setting items. Right-clicking an item displays Help. ❏ When you select Print Preview, you can see a preview of your document before printing. 7. Click OK to close the printer driver window. 8.
Printing > Printing Documents > Printing from a Computer - Windows Menu Options for the Printer Driver Open the print window in an application, select the printer, and then access the printer driver window. Note: Menus vary depending on the option you selected. Main Tab Select Setting: Save/Del: You can add or remove your own presets for frequently used print settings. Select the preset you want to use from the list. Media Type: Select the type of paper on which you print.
Printing > Printing Documents > Printing from a Computer - Windows Layout Manager: When you check this box and start printing, the print jobs are arranged and displayed on the Layout Manager dialog box. You can arrange data created by different applications in order of preference and combine them into a single print job. Note: You cannot make settings other than Document Size when Layout Manager is checked. Make the detailed print settings on the Layout Manager dialog box.
Printing > Printing Documents > Printing from a Computer - Windows Output Size: Select the paper size on which you want to print. If the Paper Size differs from the Output Size, Reduce/Enlarge is selected automatically. You do not have to select it when printing without reducing or enlarging the size of a document. Reduce/Enlarge: Allows you to reduce or enlarge the size of a document. Fit to Output Size: Automatically reduce or enlarge the document to fit to the paper size selected in Output Size.
Printing > Printing Documents > Printing from a Computer - Windows Show Settings: Displays a list of items currently set on the Main and Layout tabs. You can show or hide the current setting list screen. Utility Tab Nozzle Check: Prints a nozzle check pattern to check if the print head nozzles are clogged. Print Head Cleaning: Cleans the clogged nozzles in the print head. Because this feature uses some ink, clean the print head only if the nozzles are clogged.
Printing > Printing Documents > Printing from a Computer - Windows Language: Changes the language to be used on the printer driver window. To apply the settings, close the printer driver, and then open it again. Software Update: Starts EPSON Software Updater to check for the latest version of applications on the Internet.
Printing > Printing Documents > Printing from a Computer - Windows Printing on 2-Sides The printer driver will automatically print odd pages and even pages separately. When the odd pages have been printed, turn over the paper according to the instructions and print the even pages. Note: ❏ This feature is not available for borderless printing. ❏ 2-sided printing is supported with the rear paper feeder only.
Printing > Printing Documents > Printing from a Computer - Windows Printing a Booklet You can also print a booklet that can be created by re-ordering the pages and folding the printout. Note: ❏ This feature is not available with borderless printing. ❏ 2-sided printing is supported with the rear paper feeder only. ❏ If you do not use paper that is suitable for 2-sided printing, the print quality may decline and paper jams may occur.
Printing > Printing Documents > Printing from a Computer - Windows Printing Several Pages on One Sheet You can print several pages of data on a single sheet of paper. Note: This feature is not available with borderless printing. 1. On the printer driver's Layout tab, and then select Page Layout and N-up. 2. Click Settings, make the appropriate settings, and then click OK. 3. Set the other items on the Main and Layout tabs as necessary, and then click OK.
Printing > Printing Documents > Printing from a Computer - Windows Printing to Fit the Paper Size Select the paper size you loaded in the printer as the Output Size setting. 1. On the printer driver's Layout tab, make the following settings. ❏ Paper Size: Select the size of the print file set in the application. ❏ Output Size: Select the paper size you loaded in the printer. Fit to Output Size is automatically selected. 2.
Printing > Printing Documents > Printing from a Computer - Windows 3. Select Reduce/Enlarge and click Fit to Roll Paper Width. 4. Select the width of the roll paper loaded in the printer from Roll Width. 5. Set the other items on the Main and Layout tabs as necessary, and then click OK. “Main Tab” on page 69 “Layout Tab” on page 70 6. Click Print.
Printing > Printing Documents > Printing from a Computer - Windows Related Information & “Printing Using Easy Settings” on page 67 Printing One Image on Multiple Sheets for Enlargement (Creating a Poster) This feature allows you to print one image on multiple sheets of paper. You can create a larger poster by taping them together. 1. On the printer driver's Layout tab, select Page Layout and Poster. 2. Click Settings, make the appropriate settings, and then click OK.
Printing > Printing Documents > Printing from a Computer - Windows Making Posters Using Overlapping Alignment Marks Here is an example of how to make a poster when 2x2 is selected, and Overlapping Alignment Marks is selected in Print Cutting Guides. 1. Prepare Sheet 1 and Sheet 2. Cut off the margins of Sheet 1 along the vertical blue line through the center of the top and bottom cross marks.
Printing > Printing Documents > Printing from a Computer - Windows 2. Place the edge of Sheet 1 on top of Sheet 2 and align the cross marks, then temporarily tape the two sheets together from the back. 3. Cut the taped sheets in two along the vertical red line through the alignment markers (this time, the line to the left of the cross marks).
Printing > Printing Documents > Printing from a Computer - Windows 4. Tape the sheets together from the back. 5. Repeat steps 1 to 4 to tape Sheet 3 and Sheet 4 together. 6. Cut off the margins of Sheet 1 and Sheet 2 along the horizontal blue line through the center of the left and right side cross marks.
Printing > 7. Printing Documents > Printing from a Computer - Windows Place the edge of Sheet 1 and Sheet 2 on top of Sheet 3 and Sheet 4 and align the cross marks, and then temporarily tape them together from the back.
Printing > Printing Documents > Printing from a Computer - Windows 8. Cut the taped sheets in two along the horizontal red line through the alignment markers (this time, the line above the cross marks). 9. Tape the sheets together from the back.
Printing > Printing Documents > Printing from a Computer - Windows 10. Cut off the remaining margins along the outer guide. Adjusting the Print Color You can adjust the colors used in the print job. These adjustments are not applied to the original data. You can select from the following color correction modes. 1. On the printer driver's Main tab, select the method of color correction from the Mode setting. ❏ EPSON Standard (sRGB) Increases the contrast in images.
Printing > Printing Documents > Printing from a Computer - Windows ❏ Adobe RGB Matches image color to the Adobe RGB. Use this setting for data that contains Adobe RGB color space information. ❏ PhotoEnhance PhotoEnhance is a feature that uses Epson's proprietary image analysis and processing technology to automatically print images at a higher quality.
Printing > 3. Printing Documents > Printing from a Computer - Mac OS Click OK. When printing with an application, the Layout Manager screen opens. The print data is not printed, but one page is placed on the paper of the Layout Manager screen as one object. 4. Leave the Layout Manager screen open and repeat steps 1 to 3 to arrange the next pieces of data. The objects are added to the Layout Manager screen. 5. Arrange the objects on the Layout Manager screen.
Printing > 5. Printing Documents > Printing from a Computer - Mac OS Select Print Settings from the pop-up menu. Note: If the Print Settings menu is not displayed on macOS High Sierra, macOS Sierra, OS X El Capitan, OS X Yosemite, OS X Mavericks, the Epson printer driver has not been installed correctly. Enable it from the following menu. Select System Preferences from the Apple menu > Printers & Scanners (or Print & Scan, Print & Fax), remove the printer, and then add the printer again.
Printing > Printing Documents > Printing from a Computer - Mac OS Menu Options for the Printer Driver Open the print window in an application, select the printer, and then access the printer driver window. Note: Menus vary depending on the option you selected. Menu Options for Layout Pages per Sheet: Select the number of pages to be printed on one sheet. Layout Direction: Specify the order in which the pages will be printed. Border: Prints a border around the pages.
Printing > Printing Documents > Printing from a Computer - Mac OS ❏ Scale down only: Select this when you want to reduce the size only if the print data is too large for the paper size loaded in the printer. Menu Options for Cover Page Print Cover Page: Select whether or not to print a cover page. When you want to add a back cover, select After document. Cover Page Type: Select the contents of the cover page.
Printing > Printing Documents > Printing from a Computer - Mac OS Advanced Color Settings: You can set the gamma and adjust brightness, contrast, and saturation. Print Preview: Displays a preview of your document before printing. Menu Options for Page Layout Settings Roll Paper Option: You can make settings related to roll paper printing, such as Auto Rotate and Print page frame. Expansion: You can adjust the amount of protrusion during borderless printing.
Printing > 4. Printing Documents > Printing from a Computer - Mac OS Click Print. The next time you want to print using the same settings, select the registered preset name from the Presets. Related Information & “Printing Using Easy Settings” on page 87 Printing Several Pages on One Sheet You can print several pages of data on a single sheet of paper. 1. Select Layout from the pop-up menu. 2. Set the number of pages in Pages per Sheet, the Layout Direction (page order), and Border.
Printing > Printing Documents > Printing from a Computer - Mac OS Printing to Fit the Paper Size Select the paper size you loaded in the printer as the Destination Paper Size setting. 1. Select Paper Handling from the pop-up menu. 2. Select Scale to fit paper size. 3. Select the paper size you loaded in the printer as the Destination Paper Size setting. 4. Set the other items as necessary. 5. Click Print.
Printing > Printing Documents > Printing from a Computer - Mac OS 2. Select Page Setup from the File menu of the application. 3. Select Printer, Paper Size, enter percentage in Scale, and then click OK. Note: Select the paper size you set in the application as the Paper Size setting. 4. Set the other items as necessary. 5. Click Print. Related Information & “Printing Using Easy Settings” on page 87 Adjusting the Print Color You can adjust the colors used in the print job.
Printing > Printing Documents > Printing Documents from Smart Devices (iOS) Printing Documents from Smart Devices (iOS) You can print documents from a smart device such as a smartphone or tablet. Printing Documents Using Epson Smart Panel Note: Operations may differ depending on the device. 1. Load paper in the printer. “Loading Paper” on page 26 2. Set up your printer for wireless printing. 3. If Epson Smart Panel is not installed, install it.
Printing > 1. Printing Documents > Printing Documents from Smart Devices (Android) Load paper in the printer. “Loading Paper” on page 26 2. Set up your printer for wireless printing. See the link below. http://epson.sn 3. Connect your Apple device to the same wireless network that your printer is using. 4. Print from your device to your printer. Note: For details, see the AirPrint page on the Apple website.
Printing > 9. Printing Documents > Printing Documents from Smart Devices (Android) Tap Print. Printing Using Mopria Print Service Mopria Print Service enables instant wireless printing from Android smart phones or tablets. 1. Install Mopria Print Service from Google Play. 2. Load paper in the printer. 3. Set up your printer for wireless printing. See the link below. http://epson.sn 4. Connect your Android device to the same wireless network that your printer is using. 5.
Printing > Printing Using a Cloud Service > Registering to Epson Connect Service from the Control Panel Printing Using a Cloud Service By using Epson Connect service available on the Internet, you can print from your smartphone, tablet PC, or laptop, anytime and practically anywhere. To use this service, you need to register the user and the printer in Epson Connect. The features available on the Internet are as follows.
Maintaining the Printer Checking the Status of Consumables. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 100 Improving Paper Feeding Problems (Rear Paper Feeder). . . . . . . . . . . . . . . . . . . . . 100 Improving Print Quality. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 101 Saving Power. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Maintaining the Printer > Improving Paper Feeding Problems (Rear Paper Feeder) Checking the Status of Consumables You can check the approximate ink levels and the approximate service life of the maintenance box from the control panel or the computer. Note: You can continue printing while the ink low message is displayed. Replace the ink cartridges when required. Checking the Status of Consumables (Control Panel) Select on the printer's control panel. Checking the Status of Consumables (Windows) 1.
Maintaining the Printer > 6. Improving Print Quality > Checking and Cleaning the Print Head Follow the on-screen instructions to clean the paper path. Repeat this procedure two or three times. Note: The cleaning sheet loses effect when used three times or more. Improving Print Quality Checking and Cleaning the Print Head If the nozzles are clogged, the printouts become faint, there is visible banding, or unexpected colors appear. If the nozzles are severely clogged, a blank sheet will be printed.
Maintaining the Printer > 6. Improving Print Quality > Checking and Cleaning the Print Head Check the printed pattern to see if the print head nozzles are clogged. ❏ A: All lines are printed. Select . No further steps are needed. ❏ B or close to B: Some nozzles are clogged. Select , and then select Head Cleaning on the next screen. ❏ C or worse than C: If most lines are missing or not printed, this indicates most nozzles are clogged. Select Power Cleaning on the next screen. , and then select 7.
Maintaining the Printer > 4. Improving Print Quality > Running Power Cleaning Follow the on-screen instructions. c Important: If print quality has not improved after repeating nozzle check and head cleaning 3 times, wait for at least 6 hours without printing, and then run the nozzle check again and repeat the head cleaning if necessary. We recommend turning off the printer using the P button. If print quality has still not improved, run Power Cleaning. Checking and Cleaning the Print Head (Mac OS) 1.
Maintaining the Printer > Improving Print Quality > Running Power Cleaning 2. Select 3. Select Maintenance. 4. Select Print Head Cleaning > Power Cleaning. 5. When cleaning is finished, print the nozzle check pattern again. Check that all of the lines in the nozzle check pattern are printed correctly. on the printer's control panel.
Maintaining the Printer > Improving Print Quality > Cleaning the Paper Path for Ink Smears Preventing nozzle clogging Always use the power button when turning the printer on and off. Check that the power light is off before you disconnect the power cord. The ink itself can dry out if it is not covered. Just like placing a cap on a fountain pen or an oil pen to prevent it from drying, make sure the print head is capped properly to prevent the ink from drying.
Maintaining the Printer > Installing or Uninstalling Applications Separately > Installing the Applications Separ… “Loading Paper in the Rear Paper Feeder” on page 29 2. Select 3. Select Maintenance > Paper Guide Cleaning. 4. Follow the on-screen instructions to clean the paper path. on the printer's control panel. Note: Repeat this procedure until the paper is not smeared with ink.
Maintaining the Printer > 2. Installing or Uninstalling Applications Separately > Installing the Applications Separ… Start EPSON Software Updater. The screenshot is an example on Windows. 3. For Windows, select your printer, and then click 4. Select the items you want to install or update, and then click the install button. to check for the latest available applications. c Important: Do not turn off or unplug the printer until the update is complete.
Maintaining the Printer > Installing or Uninstalling Applications Separately > Installing the Applications Separ… Click the Driver tab. If your printer name is displayed in the list, a genuine Epson printer driver is installed on your computer. Related Information & “Installing the Applications Separately” on page 106 Checking if a genuine Epson printer driver is installed - Mac OS You can check if a genuine Epson printer driver is installed on your computer by using one of the following methods.
Maintaining the Printer > Installing or Uninstalling Applications Separately > Uninstalling Applications Related Information & “Installing the Applications Separately” on page 106 Adding the Printer (for Mac OS Only) 1. Select System Preferences from the Apple menu > Printers & Scanners (or Print & Scan, Print & Fax). 2. Click +, and then select your printer on the screen displayed. 3. Select your printer from Use. 4. Click Add.
Maintaining the Printer > 7. Installing or Uninstalling Applications Separately > Updating Applications and Firm… Follow the on-screen instructions. Uninstalling Applications - Mac OS 1. Download the Uninstaller using EPSON Software Updater. Once you have downloaded the Uninstaller, you do not need to download it again each time you uninstall the application. 2. Press the P button to turn off the printer. 3.
Maintaining the Printer > Transporting and Storing the Printer Note: If you cannot find the application you want to update in the list, you cannot update using the EPSON Software Updater. Check for the latest versions of the applications from your local Epson website. http://www.epson.
Maintaining the Printer > 2. Transporting and Storing the Printer Make sure the power light turns off, and then unplug the power cord. c Important: Unplug the power cord when the power light is off. Otherwise, the print head may not return to the home position causing the ink to dry, and printing may become impossible. 3. Disconnect all cables such as the power cord and USB cable. 4. Remove all of the paper from the printer. 5. Open the printer cover. Secure the print head to the case with tape.
Maintaining the Printer > Transporting and Storing the Printer 7. Prepare to pack the printer as shown below. 8. Pack the printer in its box, using the protective materials. c Important: ❏ When storing or transporting the printer, avoid tilting it, placing it vertically, or turning it upside down; otherwise ink may leak. ❏ Do not remove the ink cartridges from the product when storing or transporting the product. When you use the printer again, make sure you remove the tape securing the print head.
Solving Problems The Printer Does Not Work as Expected. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 115 A Message is Displayed on the LCD Screen. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .138 Paper Gets Jammed. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 139 It is Time to Replace the Ink Cartridges. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 140 It is Time to Replace the Maintenance Box. . . . . . . .
Solving Problems > The Printer Does Not Work as Expected > Paper Does Not Feed Properly The Printer Does Not Work as Expected The Printer Does Not Turn On or Off Power Does Not Turn On The following causes can be considered. The power cord is not plugged in properly to the electrical outlet. Solutions Make sure the power cord is securely plugged in. The P button was not pressed for long enough. Solutions Hold down the P button for a little longer.
Solving Problems > The Printer Does Not Work as Expected > Paper Does Not Feed Properly The installation location is inappropriate. Solutions Place the printer on a flat surface and operate in the recommended environmental conditions. & “Environmental Specifications” on page 215 Unsupported paper is being used. Solutions Use paper supported by this printer. & “Available Paper and Capacities” on page 180 & “Unavailable Paper Types” on page 188 Paper handling is inappropriate.
Solving Problems > The Printer Does Not Work as Expected > Paper Does Not Feed Properly & “Unavailable Paper Types” on page 188 Paper handling is inappropriate. Solutions Follow paper handling precautions. & “Paper Handling Precautions” on page 26 The paper is loaded incorrectly. Solutions Load paper in the correct direction, and slide the edge guide against the edge of the paper. & “Loading Paper” on page 26 Too many sheets are loaded in the printer.
Solving Problems > The Printer Does Not Work as Expected > Paper Does Not Feed Properly Paper handling is inappropriate. Solutions Follow paper handling precautions. & “Paper Handling Precautions” on page 26 The paper is moist or damp. Solutions Load new paper. Static electricity is causing sheets of paper to stick to each other. Solutions Fan the paper before loading. If the paper still does not feed, load one sheet of paper at a time. Too many sheets are loaded in the printer.
Solving Problems > The Printer Does Not Work as Expected > Cannot Print CD/DVD Tray is Ejected when You Try to Load It The disc has not been placed properly. Solutions Place the disc again properly. & “Loading a CD/DVD” on page 36 The CD/DVD tray was inserted before the printer was ready. Solutions Do not insert the CD/DVD tray until you are instructed to do so. Otherwise, an error occurs and the tray is ejected.
Solving Problems > The Printer Does Not Work as Expected > Cannot Print ❏ The printer is not recognized over a network connection “Cannot connect to a Network” on page 120 ❏ The printer is not recognized using a USB connection “The Printer Cannot Connect by USB (Windows)” on page 122 Check the following if a connection has been established. ❏ The printer is recognized, but printing cannot be performed.
Solving Problems > The Printer Does Not Work as Expected > Cannot Print Connect the computer or smart device to the same SSID as the printer. A privacy separator on the wireless router is available. Solutions Most wireless routers have a privacy separator feature that blocks communication between connected devices. If you cannot communicate between the printer and the computer or smart device even if they are connected to the same network, disable the privacy separator on the wireless router.
Solving Problems > The Printer Does Not Work as Expected > Cannot Print ❏ The communication speed becomes slow. Follow the steps below to disable IEEE802.3az for the printer and then connect. 1. Remove the Ethernet cable connected to the computer and the printer. 2. When IEEE802.3az for the computer is enabled, disable it. See the documentation provided with the computer for details. 3. Connect the computer and the printer with an Ethernet cable directly. 4.
Solving Problems > The Printer Does Not Work as Expected > Cannot Print There is a problem with the USB cable or the USB inlet. Solutions If the USB cable cannot be recognized, change the port, or change the USB cable. Cannot Print Even Though a Connection has been Established (Windows) The following causes can be considered. A genuine Epson printer driver has not been installed. Solutions If a genuine Epson printer driver (EPSON XXXXX) has not been installed, the available functions are limited.
Solving Problems > The Printer Does Not Work as Expected > Cannot Print There is still a job waiting to be printed. Solutions Click Print Queue on the printer driver's Utility tab. If unnecessary data remains, select Cancel all documents from the Printer menu. The printer is pending or offline. Solutions Click Print Queue on the printer driver's Utility tab. If the printer is offline or pending, clear the offline or pending setting from the Printer menu.
Solving Problems > The Printer Does Not Work as Expected > Cannot Print The printer port is not set correctly. Solutions Click Print Queue on the printer driver's Utility tab. Make sure the printer port is set correctly as shown below in Property > Port from the Printer menu. USB connection: USBXXX, Network connection: EpsonNet Print Port Suddenly the Printer Cannot Print over a Network Connection The problem could be one of the following issues. The network environment has been changed.
Solving Problems > The Printer Does Not Work as Expected > Cannot Print Check the network connection of the computer. See the documentation provided with the computer for details. There is still a job waiting to be printed. Solutions Click Print Queue on the printer driver's Utility tab. If unnecessary data remains, select Cancel all documents from the Printer menu. The printer is pending or offline. Solutions Click Print Queue on the printer driver's Utility tab.
Solving Problems > The Printer Does Not Work as Expected > Cannot Print If you install the printer driver multiple times, copies of the printer driver may be created. If copies such as "EPSON XXXX Series (copy 1)" are created, right-click the copied driver icon, and then click Remove Device. The printer port is not set correctly. Solutions Click Print Queue on the printer driver's Utility tab. Make sure the printer port is set correctly as shown below in Property > Port from the Printer menu.
Solving Problems > The Printer Does Not Work as Expected > Cannot Print Something is wrong with the network devices for Wi-Fi connection. Solutions Turn off the devices you want to connect to the network. Wait for about 10 seconds, and then turn on the devices in the following order; wireless router, computer or smart device, and then printer. Move the printer and computer or smart device closer to the wireless router to help with radio wave communication, and then try to make network settings again.
Solving Problems > The Printer Does Not Work as Expected > Cannot Print A privacy separator on the wireless router is available. Solutions Most wireless routers have a privacy separator feature that blocks communication between connected devices. If you cannot communicate between the printer and the computer or smart device even if they are connected to the same network, disable the privacy separator on the wireless router. See the manual provided with the wireless router for details.
Solving Problems > 2. The Printer Does Not Work as Expected > Cannot Print When IEEE802.3az for the computer is enabled, disable it. See the documentation provided with the computer for details. 3. Connect the computer and the printer with an Ethernet cable directly. 4. On the printer, print a network connection report. “Printing a Network Connection Report” on page 172 5. Check the printer's IP address on the network connection report. 6. On the computer, access Web Config.
Solving Problems > The Printer Does Not Work as Expected > Cannot Print Cannot Print Even Though a Connection has been Established (Mac OS) The following causes can be considered. A genuine Epson printer driver has not been installed. Solutions If a genuine Epson printer driver (EPSON XXXXX) has not been installed, the available functions are limited. We recommend using a genuine Epson printer driver.
Solving Problems > The Printer Does Not Work as Expected > Cannot Print printer and computer or smart device closer to the wireless router to help with radio wave communication, and then try to make network settings again. The printer is not connected to the network. Solutions Select > General Settings > Network Settings > Connection Check, and then print the network connection report.
Solving Problems > The Printer Does Not Work as Expected > Cannot Print ❏ The printer is not recognized over a network connection “Cannot connect to a Network” on page 133 Check the following if a connection has been established. ❏ The printer is recognized, but printing cannot be performed. “Cannot Print Even Though a Connection has been Established (iOS)” on page 134 Cannot connect to a Network The problem could be one of the following issues.
Solving Problems > The Printer Does Not Work as Expected > Cannot Print Connect the computer or smart device to the same SSID as the printer. A privacy separator on the wireless router is available. Solutions Most wireless routers have a privacy separator feature that blocks communication between connected devices. If you cannot communicate between the printer and the computer or smart device even if they are connected to the same network, disable the privacy separator on the wireless router.
Solving Problems > The Printer Does Not Work as Expected > Cannot Print > General Settings > Printer Settings > Paper Setup Auto Display AirPrint is disabled. Solutions Enable the AirPrint setting on Web Config. & “Application for Configuring Printer Operations (Web Config)” on page 201 Suddenly the Printer Cannot Print over a Network Connection The problem could be one of the following issues. The network environment has been changed.
Solving Problems > The Printer Does Not Work as Expected > Cannot Operate the Printer as Expected There is a problem with the network settings on the smart device. Solutions Try accessing any website from your smart device to make sure that your smart device's network settings are correct. If you cannot access any website, there is a problem on the smart device. Check the network connection of the computer. See the documentation provided with the smart device for details.
Solving Problems > The Printer Does Not Work as Expected > Cannot Operate the Printer as Expected The printer is printing high density data such as photos on plain paper. Solutions If you are printing high-density data such as photos on plain paper, printing may take some time to maintain print quality. This is not a malfunction. Printing Slows Down Dramatically During Continuous Printing The function that prevents the printer mechanism from overheating and being damaged is operating.
Solving Problems > A Message is Displayed on the LCD Screen Cannot Cancel Printing from a Computer Running Mac OS X v10.6.8 There is a problem with your AirPrint setup. Solutions Run Web Config, and then select Port9100 as the Top Priority Protocol setting in AirPrint Setup. Select System Preferences from the Apple menu > Printers & Scanners (or Print & Scan, Print & Fax), remove the printer, and then add the printer again.
Solving Problems > Paper Gets Jammed > Preventing Paper Jams Error Messages Solutions Printer error. Turn the power off and on again. If the problem persists, contact Epson Support. Do the following. 1. Open the printer cover and remove any paper or protective material inside the printer. Insert the front paper feeder completely. “Paper Gets Jammed” on page 139 2. Close the printer cover and turn the power off and on again.
Solving Problems > It is Time to Replace the Ink Cartridges > Ink Cartridge Handling Precautions ❏ Use the paper supported by this printer. “Available Paper and Capacities” on page 180 ❏ Follow paper handling precautions. “Paper Handling Precautions” on page 26 ❏ Load paper in the correct direction, and slide the edge guide against the edge of the paper. “Loading Paper” on page 26 ❏ Do not load more than the maximum number of sheets specified for paper.
Solving Problems > It is Time to Replace the Ink Cartridges > Replacing Ink Cartridge ❏ Install all ink cartridges; otherwise you cannot print. ❏ Do not turn off the printer during ink charging. If the ink charging is incomplete, you may not be able to print. ❏ Removed ink cartridges may have ink around the ink supply port, so be careful not to get any ink on the surrounding area when removing the cartridges.
Solving Problems > It is Time to Replace the Maintenance Box > Replacing a Maintenance Box Related Information & “Ink Cartridge Codes for SC-P900 Series” on page 193 & “Ink Cartridge Codes for SC-P700 Series” on page 194 & “Ink Cartridge Handling Precautions” on page 140 It is Time to Replace the Maintenance Box Maintenance Box Handling Precautions Read the following instructions before replacing the maintenance box. ❏ Do not touch the green chip on the side of the maintenance box.
Solving Problems > Print Quality is Poor Related Information & “Maintenance Box Code” on page 196 & “Maintenance Box Handling Precautions” on page 142 Print Quality is Poor Color Missing, Banding, or Unexpected Colors Appear in Printout The print head nozzles may be clogged. Solutions Perform a nozzle check to see if the print head nozzles are clogged. Perform a nozzle check, and then clean the print head if any of the print head nozzles are clogged.
Solving Problems > Print Quality is Poor The bidirectional printing setting is enabled. Solutions If print quality does not improve even after aligning the print head, disable the bidirectional setting. During bidirectional (or high speed) printing, the print head prints while moving in both directions, and vertical lines may be misaligned. Disabling this setting may slow down printing speed but improve print quality.
Solving Problems > Print Quality is Poor Paper Is Smeared or Scuffed The following causes can be considered. Paper is loaded incorrectly. Solutions When horizontal banding (perpendicular to the printing direction) appears, or the top or bottom of the paper is smeared, load paper in the correct direction and slide the edge guides to the edges of the paper. & “Loading Paper” on page 26 The paper path is smeared.
Solving Problems > Print Quality is Poor Printed Photos are Sticky The print was made on the wrong side of the photo paper. Solutions Make sure you are printing on the printable side. When printing on the wrong side of the photo paper, you need to clean the paper path. & “Cleaning the Paper Path for Ink Smears” on page 105 Images or Photos are Printed in Unexpected Colors The following causes can be considered. The print head nozzles may be clogged.
Solving Problems > Print Quality is Poor Colors in the Printout Differ from Those on the Display The color properties for the display device you are using have not been adjusted correctly. Solutions Display devices such as computer screens have their own display properties. If the display is unbalanced, the image are not displayed with proper brightness and colors. Adjust the properties of the device. Next, perform the following.
Solving Problems > Print Quality is Poor Borderless is not set in the print settings. Solutions Make borderless setting in the print settings. If you select a paper type that does not support borderless printing, you cannot select Borderless. Select a paper type that supports borderless printing. ❏ Windows Select Borderless on the printer driver's Main tab. ❏ Mac OS Select a borderless paper size from Paper Size.
Solving Problems > Print Quality is Poor The paper is loaded incorrectly. Solutions Load paper in the correct direction, and slide the edge guide against the edge of the paper. & “Loading Paper” on page 26 The size of the paper is set incorrectly. Solutions Select the appropriate paper size setting. The margin setting in the application software is not within the print area. Solutions Adjust the margin setting in the application so that it falls within the printable area.
Solving Problems > Print Quality is Poor The Printed Image Is Inverted The image is set to invert horizontally in the print settings. Solutions Clear any mirror image settings in the printer driver or the application. ❏ Windows Clear Mirror Image on the printer driver’s Layout tab. ❏ Mac OS Clear Flip Horizontal from the print dialog's Layout menu. Mosaic-Like Patterns in the Prints Images or photos with a low resolution were printed.
Solving Problems > Cannot Solve Problem > Cannot Solve Printing Problems Rollers on the roll paper unit are smeared. Solutions If you are printing on glossy roll paper with the SC-P900 Series printer and uneven vertical lines appear, remove the paper from the roll paper unit, and clean the rollers using a dry, soft, clean cloth. Rotate the rollers as you wipe them to clean the entire surface. Cannot Solve Problem If you cannot solve the problem after trying all of the solutions, contact Epson support.
Solving Problems > Cannot Solve Problem > Cannot Solve Printing Problems ❏ Run a nozzle check to see if the print head nozzles are clogged. If there are missing segments in the nozzle check pattern, the nozzles may be clogged. Repeat head cleaning and the nozzle check alternately 3 times and check if the clogging has cleared. Note that print head cleaning uses some ink.
Adding or Replacing the Computer or Devices Connecting to a Printer that has been Connected to the Network. . . . . . . . . . . . . . .154 Re-setting the Network Connection. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 155 Connecting a Smart Device and Printer Directly (Wi-Fi Direct). . . . . . . . . . . . . . . .162 Checking the Network Connection Status. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Adding or Replacing the Computer or Devices > Connecting to a Printer that has been Connected t… Connecting to a Printer that has been Connected to the Network When the printer has already been connected to the network, you can connect a computer or a smart device to the printer over the network. Using a Network Printer from a Second Computer We recommend using the installer to connect the printer to a computer. You can run the installer using one of the following methods.
Adding or Replacing the Computer or Devices > Re-setting the Network Connection > When Repl… Using a Network Printer from a Smart Device You can connect a smart device to the printer using one of the following methods. Connecting over a wireless router Connect the smart device to the same Wi-Fi network (SSID) as the printer. See the following for more details.
Adding or Replacing the Computer or Devices > Re-setting the Network Connection > When Chan… Select Change connection method for printer (for new network router or changing USB to network, etc.) on the Select Your Operation screen, and then click Next. Follow the on-screen instructions. If you cannot connect, see the following to try to solve the problem.
Adding or Replacing the Computer or Devices > Re-setting the Network Connection > Changing t… ❏ Setting up using the software disc (only for the models that come with a software disc and users with Windows computers with disc drives.) Insert the software disc into the computer, and then follow the on-screen instructions. Follow the on-screen instructions.
Adding or Replacing the Computer or Devices > Re-setting the Network Connection > Changing t… Select Change connection method for printer (for new network router or changing USB to network, etc.) on the Select Your Operation screen, and then click Next. Select the network connection that you want to use, Connect via wireless network (Wi-Fi) or Connect via wired LAN (Ethernet), and then click Next. Follow the on-screen instructions.
Adding or Replacing the Computer or Devices > Re-setting the Network Connection > Making Wi-… Making Wi-Fi Settings from the Control Panel You can make network settings from the printer's control panel in several ways. Choose the connection method that matches the environment and conditions that you are using. If you know the information for the wireless router such as SSID and password, you can make settings manually. If the wireless router supports WPS, you can make settings by using push button setup.
Adding or Replacing the Computer or Devices > 6. Re-setting the Network Connection > Making Wi-… Tap the Enter Password field, and then enter the password. Note: ❏ The password is case-sensitive. ❏ If you do not know the password, check if the information is written on the label of the wireless router. On the label, the password may be written "Network Key", "Wireless Password", and so on. If you are using the wireless router with its default settings, use the password written on the label. 7.
Adding or Replacing the Computer or Devices > 5. Re-setting the Network Connection > Making Wi-… Hold down the [WPS] button on the wireless router until the security light flashes. If you do not know where the [WPS] button is, or there are no buttons on the wireless router, see the documentation provided with your wireless router for details. 6. Tap Start Setup. 7. Tap Close. The screen automatically closes after a specific length of time if you do not tap Close.
Adding or Replacing the Computer or Devices > Connecting a Smart Device and Printer Directly (Wi… 4. Tap Others > PIN Code Setup(WPS). 5. Use your computer to enter the PIN code (an eight digit number) displayed on the printer's control panel into the wireless router within two minutes. Note: See the documentation provided with your wireless router for details on entering a PIN code. 6. Tap Start Setup on the printer's control panel. 7. Tap Close.
Adding or Replacing the Computer or Devices > Connecting a Smart Device and Printer Directly (Wi… The printer can be connected by Wi-Fi or Ethernet, and Wi-Fi Direct (Simple AP) connection simultaneously. However, if you start a network connection in Wi-Fi Direct (Simple AP) connection when the printer is connected by Wi-Fi, the Wi-Fi is temporarily disconnected.
Adding or Replacing the Computer or Devices > Connecting a Smart Device and Printer Directly (Wi… The QR code is displayed on the printer's control panel. 5. On your iPhone, iPad or iPod touch, start the standard Camera app, and then scan the QR code displayed on the printer's control panel in PHOTO mode. Use the Camera app for iOS 11 or later. You cannot connect to the printer using the Camera app for iOS 10 or earlier. Also, you cannot connect using an app for scanning QR codes.
Adding or Replacing the Computer or Devices > 8. On the printer's control panel, select Next. 9. On the iPhone, iPad or iPod touch, start Epson printing app. Connecting a Smart Device and Printer Directly (Wi… Examples of Epson printing apps 10. On the Epson printing app screen, tap Printer is not selected.. On the Epson Smart Panel, the smart device automatically connects to the printer when it starts. 11. Select the printer that you want to connect to.
Adding or Replacing the Computer or Devices > Connecting a Smart Device and Printer Directly (Wi… Note: You only need to make these settings for the printer and the smart device that you want to connect to once. Unless you disable Wi-Fi Direct or restore the network settings to their defaults, you do not need to make these settings again. 1. Tap 2. Tap Wi-Fi Direct. 3. Tap Start Setup. 4. Tap Android. 5. On the smart device, start Epson printing app. on the home screen.
Adding or Replacing the Computer or Devices > 7. Connecting a Smart Device and Printer Directly (Wi… Select the printer that you want to connect to. See the information displayed on the printer's control panel to select the printer. Note: Printers may not been displayed depending on the Android device. If printers are not displayed, connect by selecting Other OS Devices. See the related information link below for connecting. 8. When the device connection approval screen is displayed, select Approve.
Adding or Replacing the Computer or Devices > 4. Connecting a Smart Device and Printer Directly (Wi… Tap Other OS Devices. The Network Name (SSID) and Password for Wi-Fi Direct for the printer are displayed.
Adding or Replacing the Computer or Devices > Connecting a Smart Device and Printer Directly (Wi… 5. On the smart device's Wi-Fi screen, select the SSID shown on the printer's control panel, and then enter the password. 6. On the printer's control panel, select Next.
Adding or Replacing the Computer or Devices > 7. Connecting a Smart Device and Printer Directly (Wi… On the printing app screen for the smart device, select the printer that you want to connect to. See the information displayed on the printer's control panel to select the printer. 8. On the printer's control panel, select Complete. For smart devices that have been connected to the printer before, select the network name (SSID) on the smart device's Wi-Fi screen to connect them again.
Adding or Replacing the Computer or Devices > Checking the Network Connection Status Change Network Name Change the Wi-Fi Direct (simple AP) network name (SSID) used for connecting to the printer to your arbitrary name. You can set the network name (SSID) in ASCII characters that is displayed on the software keyboard on the control panel. You can enter up to 22 characters. When changing the network name (SSID), all connected devices are disconnected.
Adding or Replacing the Computer or Devices > Checking the Network Connection Status > Printi… Checking the Network Connection Status from the Control Panel You can check the network connection status using the network icon or the network information on the printer’s control panel. Checking the Network Connection Status using the Network Icon You can check the network connection status and strength of the radio wave using the network icon on the printer's home screen.
Adding or Replacing the Computer or Devices > 3. Checking the Network Connection Status > Printi… Tap General Settings > Network Settings > Connection Check. The connection check starts. 4. Tap Print Check Report. 5. Follow the instructions on the printer's screen to print the network connection report. If an error has occurred, check the network connection report, and then follow the printed solutions. 6. Tap Close.
Adding or Replacing the Computer or Devices > Checking the Network Connection Status > Printi… & “E-6” on page 175 & “E-8” on page 175 & “E-9” on page 176 & “E-10” on page 176 & “E-11” on page 176 & “E-12” on page 177 & “E-13” on page 177 & “Message on the Network Environment” on page 178 E-1 Solutions: ❏ Make sure the Ethernet cable is securely connected to your printer and to your hub or other network device. ❏ Make sure your hub or other network device is turned on.
Adding or Replacing the Computer or Devices > Checking the Network Connection Status > Printi… Related Information & “Making Settings for Connecting to the Computer” on page 156 & “Making Wi-Fi Settings from the Control Panel” on page 159 E-5 Solutions: Make sure the wireless router’s security type is set to one of the following. If it is not, change the security type on the wireless router, and then reset the printer’s network settings.
Adding or Replacing the Computer or Devices > Checking the Network Connection Status > Printi… Related Information & “Network Settings” on page 205 E-9 Solutions: Check the following. ❏ Devices are turned on. ❏ You can access the Internet and other computers or network devices on the same network from the devices you want to connect to the printer. If still does not connect your printer and network devices after confirming the above, turn off the wireless router.
Adding or Replacing the Computer or Devices > Checking the Network Connection Status > Printi… ❏ The device that is set as the default gateway is turned on. Set the correct default gateway address. You can check the default gateway address from the Network Status part on the network connection report. Related Information & “Network Settings” on page 205 E-12 Solutions: Check the following. ❏ Other devices on the network are turned on.
Adding or Replacing the Computer or Devices > Checking the Network Connection Status > Printi… ❏ You can register several passwords on a wireless router that uses the WEP security type. If several passwords are registered, check if the first registered password is set on the printer. Related Information & “Network Settings” on page 205 & “Making Settings for Connecting to the Computer” on page 156 Message on the Network Environment Message Solution The Wi-Fi environment needs to be improved.
Product Information Paper Information. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .180 Consumable Products Information. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .193 Software Information. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 196 Settings Menu List. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .203 Product Specifications. . . . .
Product Information > Paper Information > Available Paper and Capacities Paper Information Available Paper and Capacities Genuine Epson Paper for SC-P900 Series Epson recommends using genuine Epson paper to ensure high-quality printouts. Note: The availability of paper varies by location. For the latest information on paper available in your area, contact Epson support.
Product Information > Paper Information > Available Paper and Capacities Media Name Size Loading Capacity (Sheets) ICC Profile Borderless Black ink Photo Paper Glossy A4, 13x18 cm (5x7in.), 10x15 cm (4x6 in.) 30 Epson_SCP900_700_Pho toPaperGlossy.i cc ✓ Photo Black Watercolor Paper Radiant White A3+ 1 Epson_SCP900_700_Wat ercolorPaperRa diantWhite.icc ✓ Matte Black Velvet Fine Art Paper A2, A3+, A3 1 Epson_SCP900_700_Velv etFineArtPaper.
Product Information > Paper Information > Available Paper and Capacities Various other paper types Media Name Size Loading Capacity (Sheets) ICC Profile Borderless Black ink Photo Quality Self Adhesive Sheets A4 1 Epson_SCP900_700_Arc hivalMattePap er.icc - Matte Black Epson Proofing Paper White Semimatte A3+ 1 Epson_SCP900_700_Pro ofingPaperWhi teSemimatte.
Product Information > Paper Information > Available Paper and Capacities Paper suitable for printing documents * Media Name Size Loading Capacity (Sheets) ICC Profile Borderless Black ink Bright White Ink Jet Paper A3 40 ✓* Matte Black A4 80 Epson_SCP900_700_Sta ndard.icc You can specify and perform borderless printing; however, margins may appear or the print quality may decline due to the paper expanding or contracting.
Product Information > Paper Information > Available Paper and Capacities Media Name Size Loading Capacity (Sheets) ICC Profile Borderless Black ink Epson Premium Luster Photo Paper A3+, A3 10 ✓ Photo Black A4 30 Epson_SCP900_700_Pre miumLusterPh otoPaper.icc Paper suitable for printing documents and photos Media Name Size Loading Capacity (Sheets) ICC Profile Borderless Black ink Archival Matte Paper A3+, A3 10 ✓ Matte Black A4 30 Epson_SCP900_700_Arc hivalMattePap er.
Product Information > * Paper Information > Available Paper and Capacities Media Name Size Size Borderless Black ink Premium Semigloss Photo Paper (250) 329 mm (A3+) Epson_SCP900_700_Eps onPremiumSe migloss.icc ✓* Photo Black Premium Luster Photo Paper (260) 329 mm (A3+) Epson_SCP900_700_Pre miumLusterPh otoPaper.icc ✓ Photo Black There are no left and right borders.
Product Information > Paper Information > Available Paper and Capacities Name Size Capacity Thickness Source Borderless Thick paper A2, 41×51 cm (16×20 in.), 279×356 mm (11×14 in.), A3+, A3, 254×305 mm (10×12 in.), 43×56 cm (17×22 in.), 28×43 cm (11×17 in.), Letter, A4 1 0.29 to 0.5 mm Rear paper feeder ✓*2 36×43 cm (14×17 in.), 30×30 cm (12×12 in.), JIS B3, JIS B4, Half Letter, Legal - Non-standard sizes ✓*2 Width: 89 to 431.8 mm Length: 127 to 1200 mm A2, 41×51 cm (16×20 in.
Product Information > Paper Information > Available Paper and Capacities Name Size Capacity Thickness Source Borderless Plain paper (cut sheets) A3+, A3, B4, Letter Up to 5mm total thickness *1 0.08 to 0.11 mm (64 to 90g/m2) Rear paper feeder - Legal, A4, B5, A5, A6 Up to 12 mm total thickness *1 Non-standard sizes Up to 5mm total thickness *1 1 0.08 to 0.11 mm (64 to 90g/m2) Roll paper unit ✓*2 1 0.29 to 0.
Product Information > *2: Paper Information > Printing to Paper Types Other than Genuine Paper You can specify and perform borderless printing; however, margins may appear or the print quality may decline due to the paper expanding or contracting. See the manual supplied with the paper and adjust settings as appropriate. Unavailable Paper Types Do not use the following papers. Using these types of paper causes paper jams and smears on the printout.
Product Information > Paper Information > Printing to Paper Types Other than Genuine Paper ❏ Windows Select Epson Media Installer on the Utility tab. You can also start it from a shortcut icon on the computer's desktop. ❏ Mac OS Start Epson Media Installer as shown below. Applications > Epson Software > Epson Utilities > Epson Media Installer.app A list of paper information that can be added is displayed.
Product Information > 2. Paper Information > Printing to Paper Types Other than Genuine Paper Add the paper information. Select the target paper and click Download and Register. You can select the added paper information from Epson Print Layout, printer drivers, and the paper setting menus on the printer's control panel. 3. Select the target paper in the paper type setting in Epson Print Layout or the printer driver, and then print.
Product Information > Paper Information > Printing to Paper Types Other than Genuine Paper Editing paper information You can edit the paper information and print using your favorite settings. 1. Start Epson Media Installer, and select Media Management. Select the paper settings (media settings) that you want to edit, and then select 2. . Select the paper information that you copied, and then select . Note: The edits are only performed on the copied paper information (media settings).
Product Information > 3. 4. Paper Information > Printing to Paper Types Other than Genuine Paper Specify each setting on the editing screen, and then select OK. Items Setting Explanation Media Setting Name Specify a name for the media settings. Media Type Set the category name for the paper. This is displayed to the paper type display in the printer driver or on the printer's control panel. Platen Gap Specify the interval (platen gap) of the print head and the paper.
Product Information > Consumable Products Information > Ink Cartridge Codes for SC-P900 Series Consumable Products Information Ink Cartridge Codes for SC-P900 Series The following are the codes for genuine Epson ink cartridges.
Product Information > Consumable Products Information > Ink Cartridge Codes for SC-P700 Series Ink color Product number PK (Photo Black) T47E1 C (Cyan) T47E2 VM(Vivid Magenta) T47E3 Y (Yellow) T47E4 LC (Light Cyan) T47E5 VLM(Vivid Light Magenta) T47E6 GY(Gray) T47E7 MK(Matte Black) T47E8 LGY(Light Gray) T47E9 V(Violet) T47ED Epson recommends the use of genuine Epson ink cartridges. Epson cannot guarantee the quality or reliability of non-genuine ink.
Product Information > Consumable Products Information > Ink Cartridge Codes for SC-P700 Series Ink color Product number MK(Matte Black) T46S8 LGY(Light Gray) T46S9 V(Violet) T46SD For Hong Kong Ink color Product number PK (Photo Black) T46V1 C (Cyan) T46V2 VM(Vivid Magenta) T46V3 Y (Yellow) T46V4 LC (Light Cyan) T46V5 VLM(Vivid Light Magenta) T46V6 GY(Gray) T46V7 MK(Matte Black) T46V8 LGY(Light Gray) T46V9 V(Violet) T46VD For Asian Countries except Hong Kong Ink color Produc
Product Information > Software Information > Software for Printing Note: ❏ Ink cartridge codes may vary by location. For the correct codes in your area,contact Epson support. ❏ Not all cartridges are available in all regions. ❏ For users in Europe, visit the following website for information on Epson's ink cartridge yields. http://www.epson.eu/pageyield ❏ Although the ink cartridges may contain recycled materials, this does not affect printer function or performance.
Product Information > Software Information > Software for Printing ❏ Windows 10 Click on the start button, and then select Windows System > Control Panel > View devices and printers in Hardware and Sound. Right-click on your printer, or press and hold it and then select Printing preferences ❏ Windows 8.1/Windows 8 Select Desktop > Settings > Control Panel > View devices and printers in Hardware and Sound.
Product Information > Software Information > Software for Printing Note: Depending on the application being used, Page Setup may not be displayed in the File menu, and the operations for displaying the print screen may differ.See the application's help for details. Starting the utility Select System Preferences from the Apple menu > Printers & Scanners (or Print & Scan, Print & Fax), and then select the printer. Click Options & Supplies > Utility > Open Printer Utility.
Product Information > Software Information > Software for Printing Note: ❏ To use this application the printer driver for this printer must be installed. ❏ See to the software manual for details on how to start from commercially available application software such as Adobe Photoshop and Adobe Lightroom. ❏ You can use Epson Print Layout on iPad. This allows you to move your project to other locations. ❏ Search for and install Epson Print Layout from the App Store.
Product Information > Software Information > Software for Printing Search for and install Epson Smart Panel from App Store or Google Play. Guide to the Epson Smart Panel Screen Start Epson Smart Panel from your smart device and select the item you want to use from the home screen. The following screens are subject to change without notice. The contents may vary depending on the product. A displays notices and how to use the application. starts registering a printer.
Product Information > Software Information > Software for Making Settings or Managing Devices Software for Making Settings or Managing Devices Application for Configuring Printer Operations (Web Config) Web Config is an application that runs in a web browser, such as Internet Explorer and Safari, on a computer or smart device. You can confirm the printer status or change the network service and printer settings. To use the Web Config, connect the printer and the computer or device to the same network.
Product Information > Software Information > Software for Updating ❏ Windows 7 Click the start button, and select Control Panel > View devices and printers in Hardware and Sound. 2. Right-click on your printer and select Properties. 3. Select the Web Service tab and click the URL. Since the printer uses a self-signed certificate when accessing HTTPS, a warning is displayed on the browser when you start Web Config; this does not indicate a problem and can be safely ignored.
Product Information > Settings Menu List > Printer Settings Settings Menu List Select > General Settings on the home screen of the printer to make various settings. Screen Customization Select the menus on the control panel as described below. > General Settings > Screen Customization Background Color: Change the background color of the LCD screen. Home Screen: Set the default screen you want to display as the home screen.
Product Information > Settings Menu List > Basic Settings Error Notice: Paper Mismatch: Displays a warning if the paper settings (print settings) for the print job do not match the printer's paper settings made when you loaded the paper. This setting prevents misprinting. However, the paper setting screen is not displayed when Paper Setup Auto Display is disables in the following menus. If you disable this feature, you cannot print from an iPhone, iPad, or iPod touch using AirPrint.
Product Information > Settings Menu List > Network Settings ❏ Power Off If Inactive Select this setting to turn the printer off automatically if it is not used for a specified period of time. Any increase will affect the product’s energy efficiency. Please consider the environment before making any change. ❏ Power Off If Disconnected Select this setting to turn the printer off after 30 minutes when all ports including the USB port are disconnected.
Product Information > Settings Menu List > Web Service Settings ❏ Others ❏ PIN Code Setup(WPS) ❏ Wi-Fi Auto Connect ❏ Disable Wi-Fi You may be able to resolve network problems by disabling the Wi-Fi settings or making the Wi-Fi settings again. Tap > Wi-Fi (Recommended) > Change Settings > Others > Disable Wi-Fi > Start Setup.
Product Information > Settings Menu List > Printer Status/Print > General Settings > Web Service Settings Epson Connect Services: Displays whether the printer is registered and connected to Epson Connect. You can register to the service by selecting Register and follow the instructions. When you have registered, you can change the following settings. ❏ Suspend/Resume ❏ Unregister For details, see the following web site. https://www.epsonconnect.com/ http://www.epsonconnect.
Product Information > Product Specifications > Printer Specifications Usage History Sheet: Print information sheets showing the usage history of the printer. Network: Displays the current network settings. You can also print the status sheet. Problem Checklist: Print sheets to check for printer problems. If the printer malfunctions, print the "customer diagnosis sheets (3 sheets)" and fill in the required information on the first and second sheets.
Product Information > Product Specifications > Printer Specifications Printable Area Printable Area for Single Sheets Print quality may decline in the shaded areas due to the printer's mechanism. Printing with borders A* 3 mm B 3 mm C 33 mm D 36 mm *: Poster board is printed with 20.0 mm margins. Borderless printing* A 36 mm B 39 mm C 3 mm *: Borderless printing is not supported with poster board.
Product Information > Product Specifications > Printer Specifications Printing with borders A 50mm B 3mm C* 14mm D* 50mm A 50mm B* 14mm C* 50mm *: 0 mm for continuous print jobs. Borderless printing *: 0 mm for continuous print jobs. Printable Area for CD/DVD Print quality may decline in the shaded areas due to the printer's mechanism. A 18 mm (0.71 in.) B 43 mm (1.69 in.) C 116 mm (4.57 in.) D 120 mm (4.72 in.
Product Information > Product Specifications > Network Specifications Interface Specifications For Computer SuperSpeed USB Network Specifications Wi-Fi Specifications See the following table for Wi-Fi specifications.
Product Information > Product Specifications > Network Specifications Table B Standards IEEE802.11a/b/g/n*1/ac Frequency Ranges IEEE802.11b/g/n: 2.4 GHz, IEEE802.11a/n/ac: 5 GHz Channels Wi-Fi 2.4 GHz 1/2/3/4/5/6/7/8/9/10/11/12*2/13*2 5 GHz*3 W52 (36/40/44/48), W53 (52/56/60/64), W56 (100/104/108/112/116/120/124/128/132/136/140), W58 (149/153/157/161/165) Wi-Fi Direct 2.
Product Information > Product Specifications > Supported Third Party Services Network Functions and IPv4/IPv6 Functions Network Printing Network Scanning Fax IPv4 ✓ - Standard TCP/IP (Windows) IPv4, IPv6 ✓ - WSD Printing (Windows) IPv4, IPv6 ✓ Windows Vista or later Bonjour Printing (Mac OS) IPv4, IPv6 ✓ - IPP Printing (Windows, Mac OS) IPv4, IPv6 ✓ - PictBridge Printing (Wi-Fi) IPv4 ✓ Digital camera Epson Connect (Email Print, Remote Print) IPv4 ✓ - AirPrint (iOS, Mac OS) I
Product Information > Product Specifications > Electrical Specifications Dimensions SC-P900 Series Dimensions Storage ❏ Width: 615 mm (24.2 in.) ❏ Depth: 368 mm (14.5 in.) ❏ Height: 199 mm (7.8 in.) Printing ❏ Width: 615 mm (24.2 in.) ❏ Depth: 905 mm (35.6 in.) ❏ Height: 520 mm (20.5 in.) Weight Approx. 14.8 kg (32.6 lb) (Without the ink cartridges and the power cord.) Approx. 15.9 kg (35.1 lb) (With the ink cartridges and the power cord.) SC-P700 Series Dimensions Storage ❏ Width: 515 mm (20.3 in.
Product Information > Product Specifications > Environmental Specifications Note: ❏ Check the label on the printer for its voltage. ❏ For European users, see the following Website for details on power consumption. http://www.epson.eu/energy-consumption SC-P700 Series Model 100 to 240 V Model 100 to 120V Model 220 to 240 V Model Rated Frequency Range 50 to 60 Hz 50 to 60 Hz 50 to 60 Hz Rated Current 1.3 to 0.7 A 1.2 A 0.7 A Power Consumption (with USB Connection) Printing: Approx. 22.
Product Information > Product Specifications > Installation Location and Space Freezing Temperature 0 °C (32 °F) Ink thaws and is usable after approximately 3 hours at 25 °C (77 °F). * You can store for one month at 40 °C (104 °F). Installation Location and Space Secure enough place to install and operate the printer correctly.
Product Information > Regulatory Information > Standards and Approvals System Requirements ❏ Windows 10 (32-bit, 64-bit)/Windows 8.1 (32-bit, 64-bit)/Windows 8 (32-bit, 64-bit)/Windows 7 (32-bit, 64bit) ❏ macOS Catalina(10.15)/macOS Mojave(10.14)/macOS High Sierra(10.13)/macOS Sierra(10.12)/OS X El Capitan(10.11)/OS X Yosemite(10.10)/OS X Mavericks(10.9) Note: ❏ Mac OS may not support some applications and features. ❏ The UNIX File System (UFS) for Mac OS is not supported.
Product Information > Regulatory Information > Restrictions on Copying http://www.epson.eu/conformity K371A For use only in Ireland, UK, Austria, Germany, Liechtenstein, Switzerland, France, Belgium, Luxemburg, Netherlands, Italy, Portugal, Spain, Denmark, Finland, Norway, Sweden, Iceland, Croatia, Cyprus, Greece, Slovenia, Malta, Bulgaria, Czech, Estonia, Hungary, Latvia, Lithuania, Poland, Romania, and Slovakia.
Product Information > Regulatory Information > Restrictions on Copying Note: Copying these items may also be prohibited by law. Responsible use of copyrighted materials: Printers can be misused by improperly copying copyrighted materials. Unless acting on the advice of a knowledgeable attorney, be responsible and respectful by obtaining the permission of the copyright holder before copying published material.
Where to Get Help Technical Support Web Site. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 221 Contacting Epson Support. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Where to Get Help > Contacting Epson Support > Help for Users in Taiwan Technical Support Web Site If you need further help, visit the Epson support website shown below. Select your country or region and go to the support section of your local Epson website. The latest drivers, FAQs, manuals, or other downloadables are also available from the site. http://support.epson.net/ http://www.epson.
Where to Get Help > Contacting Epson Support > Help for Users in New Zealand Information on product specifications, drivers for download, and products enquiry are available. Epson HelpDesk Phone: +886-2-80242008 Our HelpDesk team can help you with the following over the phone: ❏ Sales enquiries and product information ❏ Product usage questions or problems ❏ Enquiries on repair service and warranty Repair service center: http://www.tekcare.com.tw/branchMap.
Where to Get Help > Contacting Epson Support > Help for Users in Thailand Access the Epson New Zealand World Wide Web pages. Worth taking your modem here for the occasional surf! The site provides a download area for drivers, Epson contact points, new product information and technical support (e-mail). Epson Helpdesk Phone: 0800 237 766 Epson Helpdesk is provided as a final backup to make sure our clients have access to advice.
Where to Get Help > Contacting Epson Support > Help for Users in Indonesia Email: support@eth.epson.co.th Our Call Centre team can help you with the following over the phone: ❏ Sales enquiries and product information ❏ Product usage questions or problems ❏ Enquiries on repair service and warranty Help for Users in Vietnam Contacts for information, support, and services are: Epson Service Center 65 Truong Dinh Street, District 1, Hochiminh City, Vietnam.
Where to Get Help > Province Contacting Epson Support > Help for Users in Indonesia Company Name Address Phone E-mail WEST JAWA ESC BANDUNG Jl. Cihampelas No. 48 A Bandung Jawa Barat 40116 (+6222) 4207033 YAP Square, Block A No. 6 Jl. C Simanjutak Yogyakarta - DIY (+62274) 581065 Hitech Mall Lt. 2 Block A No. 24 Jl. Kusuma Bangsa No. 116 - 118 Surabaya - JATIM (+6231) 5355035 Jl. Cendrawasih NO. 3A, kunjung mae, mariso, MAKASSAR - SULSEL 90125 (+62411) 8911071 Komp.
Where to Get Help > Contacting Epson Support > Help for Users in India Help for Users in Hong Kong To obtain technical support as well as other after-sales services, users are welcome to contact Epson Hong Kong Limited. Internet Home Page http://www.epson.com.
Where to Get Help > Contacting Epson Support > Help for Users in the Philippines World Wide Web http://www.epson.co.in Information on product specifications, drivers for download, and products enquiry are available.
