User's Manual

198
Note: These settings can be locked by an administrator. If you cannot access or change these setting,
contact your administrator for assistance.
1. Press the home button, if necessary.
2. Select Settings > General Settings > Fax Settings > Fax Setting Wizard.
You see a screen like this:
3. Select Proceed.
4. On the Fax Header screen, use the displayed keypad to enter the sender name for your fax source,
such as your name or a business name. You can enter up to 40 characters. Select OK when you are
done.
5. On the Your Phone Number screen, use the displayed keypad to enter your fax number, up to 20
characters. Select OK when you are done.
Note: The name and phone number in the fax header identifies the source of the faxes you send.
6. On the Distinctive Ring Setting screen, do one of the following:
• If you have subscribed to a distinctive ring service from your telephone company, select Proceed.
Select the ring pattern to be used for incoming faxes or select All. Go to the next step.