User's Manual

Table Of Contents

322

• If your product is connected to a USB hub, connect it directly to your computer instead.

• If incorrect characters still appear in your prints, try connecting your product using a different cable.

• If your computer entered sleep mode the last time you printed, the next print job after your computer

exits sleep mode may contain garbled characters. Print your document again.

• Make sure you are using the printer software for this product. Check the product name at the top of the

driver window.

Parent topic: Solving Page Layout and Content Problems

Related tasks

Selecting Basic Print Settings - Windows

Selecting Basic Print Settings - Mac

Incorrect Image Size or Position

If your printed image is the wrong size or in the wrong position, try these solutions:

• Make sure you selected the correct paper size and layout settings in your printing program and printer

software.

• Make sure you selected the correct paper size on the control panel.

• Make sure your paper is positioned correctly for feeding into the printer.

• Slide the edge guides against the edges of the paper.

• Clean the scanner glass and document cover.

• If the edges of a copy are cropped, slightly move the original away from the edges of the scanner

glass.

• Be sure to select the appropriate original size setting for your original in the copy settings.

• If the image is slightly enlarged and cropped during borderless printing, change the Expansion

setting.

You can use the preview option in your printer software to check your margins before you print.