User Manual

Settings item Settings value Explanation
Device Name Set the name of the printer to use on the network.
TCP/IP
Auto
*
Automatically assign the printer IP address using DHCP functionality in the
router.
Manual Select this to manually assign a xed IP address, then input the IP address,
subnet mask, and other required information. For details, see the Administrator's
Guide.
Proxy Server Use When using a proxy server to directly connect from the intranet to the Internet
so that the printer may directly access the Internet for rmware updates or
similar, select Use, and set the server name and port number.
Do Not Use
*
IPv6 Address
Enable
*
Select whether to enable or disable the IPv6 function.
Disable
Link Speed &
Duplex
Auto
*
Normally, set this to Auto.
10BASE-T Half
Duplex
10BASE-T Full
Duplex
100BASE-TX Half
Duplex
100BASE-TX Full
Duplex
Redirect HTTP
to HTTPS
Enable
*
Select whether to enable or disable the function to auto-redirect HTTP to
HTTPS.
Disable
Disable
IPsec/IP Filter‐
ing
Enable To enable IPsec/IP ltering functionality, use Web Cong. For details, see the
Administrator's Guide.
Disable
*
Disable
IEEE802.1X
Enable To enable IEEE802.1X functionality, use Web Cong. For details, see the
Administrator's Guide.
Disable
*
SC-T5100 Series/SC-T3100 Series/SC-T5100N Series/SC-T3100N Series User's Guide
Using the Menu
129