Specifications

2-67
Printing with EPSON Drivers for Macintosh | 67
7. If you are using non-EPSON media and you need to fine-tune its
performance, click the
Paper Config button. You see this screen:
8. Select the correct settings to match your ICC profile. These settings
override any paper configuration settings you may have made using the
printer’s control panel.
• Color Density lets you control the ink saturation level (for example,
when you turn off color management in your printer software).
• Drying Time per Print Head Pass lets you print with
non-EPSON media and avoid smearing the ink. You can make the
print head wait up to 5 seconds after each pass to allow ink to dry on
the page.
• Paper Feed Adjustment helps eliminate banding. Choose a lower
value if you see white lines on your prints, or a higher value if you
see dark lines.
• Paper Suction lets you decrease the paper suction level when
printing on thinner media (less than 12 lb), such as CAD drafting
paper or backlight film.
• Paper Thickness helps reduce vertical banding and creates a
sharper image when printing on unusually thick or thin paper.
sp4000Guide.book Page 67 Friday, October 22, 2004 5:06 PM