Specifications

14 | Introduction

•

This product’s power cord is designed for use with this product only.

Using it with other equipment may result in fire or electric shock.

• Do not use a damaged or frayed power cord.

• If you use an extension cord with this product, make sure the total

ampere rating of devices plugged into the extension cord does not exceed

the cord’s ampere rating. Also, make sure the total ampere rating of all

devices plugged into the wall outlet does not exceed the wall outlet’s

ampere rating.

• Do not block or cover the openings in this product’s cabinet.

• Do not put your hand inside this product or touch the ink cartridges

during printing.

• Do not move the print head by hand; otherwise you may damage this

product.

• Do not insert objects through the slots. Take care not to spill liquid on

this product.

• Do not attempt to service this product yourself.

• Power down the printer from the control panel, unplug the printer, and

refer servicing to qualified service personnel under the following

conditions:

The power cord or plug is damaged; liquid has entered this product; this

product has been dropped or the cabinet damaged; this product does not

operate normally or exhibits a distinct change in performance.

Caution: Always turn

the printer off using the

P Power button. When

you press this button,

POWER OFF appears on

the LCD panel. Do not

unplug the printer or turn

off the power to the

printer until the panel

shuts off. This ensures

that the print head is

safely capped.

sp4800Guide.book Page 14 Tuesday, March 7, 2006 3:49 PM