Specifications

1-18
18 | Setting Up the Printer
2. Remove all the packing materials and tape. Save the box and packaging
in case you need to ship the printer.
3. Remove the two screws and remove the carriage retainer bracket. Store
the screws and retainer bracket in case you need to transport the printer
later.
4. Unlock the print head carriage by pulling the green tab to the left. Do
not push down and do not remove the tab.
Note: To prevent paper
jams, don’t place the
screws back in the
printer.
sp4800Guide.book Page 18 Tuesday, March 7, 2006 3:49 PM