Specifications

2-59
Handling Paper and Other Media | 59
• CUT METHOD
lets you decrease the cutting blade pressure for
thinner media, or adjust the speed for thick media. You may need to
experiment to determine the cleanest cut for your paper.
• PPR FEED ADJUSTMENT helps eliminate banding. Choose a
lower value if you see white lines on your prints, or a higher value if
you see dark lines.
• EJECT ROLLER TYPE lets you define the eject roller for printing
with non-Epson media. You may need to experiment to determine
the best setting for your paper.
• DRYING TIME lets you print with non-Epson media and avoid
smearing the ink. You can make the print head wait up to 10
seconds after each pass to allow ink to dry on the page.
•SUCTION lets you decrease the paper suction level when printing
on thin media (under 12 lb), such as drafting paper or backlight film.
• M/W ADJ adjusts the intensity of the MicroWeave
®
pattern. This
improves print quality, but lowers printing speed.
10. When done, press the
Pause button.
Selecting Paper Configurations
Once you have created a paper configuration, you can select it whenever you
print on that paper:
1. Press the
Menu button, then press the button to display
CUSTOM PAPER. Press the Menu button again.
2. Press the button to display
PAPER NUMBER, then press the
Menu button.
3. Press the button to select the configuration number that you want to
use. If you select
STANDARD, the printer uses the driver settings. If you
select a number from 1 to 10, the control panel settings override the
driver settings.
4. Press the
Menu button. The configuration number you selected is
displayed on the LCD.
5. Press the
Pause button to exit the menu.
sp4800Guide.book Page 59 Tuesday, March 7, 2006 3:49 PM