Specifications

3-70
70 | Printing with Epson Drivers for Macintosh
• (Off) No Color Adjustment
to disable color management in the
printer driver. Choose this mode when you use a color-managed
workflow in Photoshop or other software applications.
3. If you are using non-Epson media and you need to fine-tune its
performance, select
Paper Configuration from the pop-up menu. You
see this screen:
4. Select the correct settings to match your ICC profile. These settings
override any paper configuration settings you may have made using the
printer’s control panel.
• Color Density lets you control the ink saturation level (for example,
when you turn off color management in your printer software).
• Drying Time per Print Head Pass lets you print with non-Epson
media and avoid smearing the ink. You can make the print head
wait up to 5 seconds after each pass to allow ink to dry on the page.
• Paper Feed Adjustment helps reduce banding. Choose a lower
value if you see white lines on your prints, or a higher value if you
see dark lines.
Note: You may need to
change the Color Density
setting if your custom
color profile was created
to optimize D-max and
color gamut.
sp4800Guide.book Page 70 Tuesday, March 7, 2006 3:49 PM