User Manual
Table Of Contents
- Before Use
- Part Names and Functions
- Setup
- Removing the Protective Materials and Tape
- Installing the Printer
- Connecting the AC Adapter
- To install the AC Adapter (only for the TM-J7700)
- Connecting the Interface Cable
- Attaching the Power Switch Cover
- Changing the Roll Paper Width
- Turning On/Off
- Installing/Replacing the Roll Paper
- Inserting Slip Paper
- Installing/Replacing the Ink Cartridge
- Test Printing
- Maintenance
- Transporting
- Troubleshooting
- Specification
- Consumable Products
- Appendix
2
English
Before Use
Please read this manual carefully before using this product. Keep this manual at hand for immediate
reference whenever necessary. For details about the functions and operation procedure of this product and
software, refer to Technical Reference Guide.
Safety Precautions
The symbols shown below are used in this manual in order to ensure safety and proper use of this product
and to prevent danger to customers and other persons, and property damage. The symbols indicate the
precaution levels as described below. Be sure that you completely understand their meaning before reading
this manual.
!WARNING:
Handling the product improperly by ignoring this symbol can lead to death or serious injury.
!CAUTION:
Handling the product improperly by ignoring this symbol can lead to injury and property damage.
Q
Notes:
Indicates supplementary notes and other useful information.
Cautions on Installation
!CAUTION:
❏
Do not install/store the product in an unstable location or in a location subject to vibration from other
devices. Equipment may fall or collapse, causing breakage and possible injury.
❏
Do not install the product in a location exposed to oily smoke or dust, or in a humid location. Doing so may
cause electric shock or fire.
❏
Place this product near a wall outlet where the plug can be easily unplugged.
❏
Use this product in the environment described in this manual. Failure to do so may damage the product or
cause injuries. (
U
"Specification" on page 33)
Cautions on Power Supply
!WARNING:
❏
Be sure to use the specified AC adapter. Connection to an improper power source may cause fire.
(U
"Specification" on page 33)
❏
Do not allow dust or foreign materials to adhere to the power plug. Accumulated dust or foreign
material may cause electric shock or fire.
❏
Insert the power plug securely into the socket. Failure to insert the plug securely may cause electric
shock or fire.
❏
For the power cable, use either the included one or a designated one that meets the relevant safety
standards of the area where you plan to use it.
❏
Do not use it for any device other than the designated device.