User Manual
Table Of Contents
- Before Use
- Part Names and Functions
- Setup
- Removing the Protective Materials and Tape
- Installing the Printer
- Connecting the AC Adapter
- To install the AC Adapter (only for the TM-J7700)
- Connecting the Interface Cable
- Attaching the Power Switch Cover
- Changing the Roll Paper Width
- Turning On/Off
- Installing/Replacing the Roll Paper
- Inserting Slip Paper
- Installing/Replacing the Ink Cartridge
- Test Printing
- Maintenance
- Transporting
- Troubleshooting
- Specification
- Consumable Products
- Appendix
21
English
Installing/Replacing the Roll Paper
!CAUTION:
❏
Be sure to use roll paper that meets the specifications.
❏
Do not use thermal paper.
❏
Be careful not to insert your fingers into the paper exit. The cutter blade is installed inside the paper exit
and you might be injured.
Q
Notes:
Do not open the roll paper cover during printing or paper feeding.
Follow the procedure below to install or replace paper:
1. Make sure the printer is turned on. (U
"Turning On/Off" on page 20)
2. Open the roll paper cover by pressing the cover open button.