User Manual
Table Of Contents
- Before Use
- Part Names and Functions
- Setup
- Removing the Protective Materials and Tape
- Installing the Printer
- Connecting the AC Adapter
- To install the AC Adapter (only for the TM-J7700)
- Connecting the Interface Cable
- Attaching the Power Switch Cover
- Changing the Roll Paper Width
- Turning On/Off
- Installing/Replacing the Roll Paper
- Inserting Slip Paper
- Installing/Replacing the Ink Cartridge
- Test Printing
- Maintenance
- Transporting
- Troubleshooting
- Specification
- Consumable Products
- Appendix
22
English
3. Remove the used roll paper core if there is one.
4. Put the roll paper inside the printer in the correct direction as shown in the illustration below.
5. Before closing the cover, pull out the leading edge of the roll paper and align the mark as shown in the
illustration below.
6. Close the roll paper cover.
The printer will automatically feed the roll paper to remove any slack in the paper.
➀
➁