User Manual
Table Of Contents
- Before Use
- Part Names and Functions
- Setup
- Removing the Protective Materials and Tape
- Installing the Printer
- Connecting the AC Adapter
- To install the AC Adapter (only for the TM-J7700)
- Connecting the Interface Cable
- Attaching the Power Switch Cover
- Changing the Roll Paper Width
- Turning On/Off
- Installing/Replacing the Roll Paper
- Inserting Slip Paper
- Installing/Replacing the Ink Cartridge
- Test Printing
- Maintenance
- Transporting
- Troubleshooting
- Specification
- Consumable Products
- Appendix
24
English
Installing/Replacing the Ink Cartridge
!CAUTION:
Read the handling instructions carefully before installing the ink cartridge.
(
U
"Cautions on the Ink Cartridge" on page 4, "Ink cartridge SJIC33P (K)" on page 34)
Install/Replace the ink cartridge by following the procedure below.
1. Make sure the printer is turned on. (U
"Turning On/Off" on page 20)
2. Make sure the (Ink) LED is on or flashing.
3. Pull the handle to open the front cover
4. During replacement, remove the used ink cartridge.
!CAUTION:
Do not put your fingers inside the ink cartridge compartment or you may be injured by a sharp or
protruding part.
Handle