User Manual
Table Of Contents
- Before Use
- Part Names and Functions
- Setup
- Removing the Protective Materials and Tape
- Installing the Printer
- Connecting the AC Adapter
- To install the AC Adapter (only for the TM-J7700)
- Connecting the Interface Cable
- Attaching the Power Switch Cover
- Changing the Roll Paper Width
- Turning On/Off
- Installing/Replacing the Roll Paper
- Inserting Slip Paper
- Installing/Replacing the Ink Cartridge
- Test Printing
- Maintenance
- Transporting
- Troubleshooting
- Specification
- Consumable Products
- Appendix
29
English
Transporting
Follow the procedure below to transport this printer.
1. Remove the roll paper.
Q
Notes:
Leave the ink cartridge in the printer. Transporting the printer with the ink cartridge removed can result in
dot dropout or ink adhering to the inside of the case.
2. Turn off the printer.
3. Check that the (Power) LED is off.
4. Disconnect the power cable and all other cables.
5. Attach the protective materials and affix tape as shown in the figure below.
TM-J7200
A
3
21
4
B