User Manual

3
English
❏ Do not use a damaged power cable. Doing so may cause electric shock or fire.
Contact qualified service personnel for advice if the power cable is damaged. Observe the
following points so as not to damage the power cable:
• Do not modify the power cable.
• Do not place heavy objects on the power cable.
• Do not forcibly bend, twist or pull the power cable.
• Do not locate the power plug near a heating device.
❏ Do not hold the power plug with a wet hand. Doing so may cause electric shock.
❏ Do not connect too many power cables to one outlet. Doing so may cause fire.
❏ Disconnect the power plug from the outlet on a periodical basis, and clean the areas around and
between the blades. Leaving the power plug connected to the outlet for a long period of time may
cause dust to accumulate on the blade root, resulting in a short-circuit or fire.
❏ Hold the plug and do not pull the cable when disconnecting the power plug from the outlet. Pulling
the cable may damage the cable or deform the plug, causing electric shock or fire.
!CAUTION:
❏ To ensure safety, unplug this product before leaving it unused for an extended period.
Cautions on Handling
!WARNING:
❏ Do not use this product in a location with volatile substances such as alcohol or paint thinner, or
near fire. Doing so may cause electric shock or fire.
❏ Shut down the product immediately if it produces smoke, a strange odor, or unusual noise.
Continued use may cause electric shock or fire. Immediately unplug the product when a fault or
other problem occurs, and contact qualified service personnel.
❏ Shut down the product immediately if water or other liquid spills into this product. Continued use
may cause electric shock or fire. Immediately unplug the product and contact qualified service
personnel.
❏ Never disassemble or repair this product. Tampering with this product may result in injury or fire.
❏ Do not use this product in an environment where inflammable gas or explosive gas may exist. Do
not use aerosol sprayers containing flammable gas inside or around this product. Doing so may
cause fire.
❏ Do not connect cables in ways other than those mentioned in the manual. Doing so may cause
fire.
(
U "Connecting the AC Adapter" on page 12, "Connecting the Interface Cable" on page 16)
❏ Do not connect a telephone line to the drawer kick connector or the DM-D connector; otherwise
the printer and the telephone line may be damaged.
❏ Do not connect a LAN cable to the DM-D connector; otherwise the connected device may be
damaged.
❏ Do not connect a telephone line to the drawer kick connector; otherwise the printer and the
telephone line may be damaged.
❏ Do not touch the areas inside the product other than those mentioned in this manual. Doing so
may cause electric shock or burns.
❏ Do not insert metal or flammable materials, or allow them to fall into the product. Doing so may
cause electric shock or fire.