User Manual

5
English
❏ Do not allow foreign objects to fall into the cartridge installation section. Doing so may cause printing
malfunction. Remove any object that might have fallen into the installation section, taking care not to
damage the section.
❏ When ink is charged for the first time (right after purchase), ink is consumed for filling the print head nozzle
(ink discharge holes) to get ready for printing. That is why the number of the printable sheets may be fewer
than for the cartridges to be installed later.
❏ Dispose the ink cartridges properly following the law or regulations of your country and area.
❏ If you turn the power off the product using the power switch, the print head is automatically capped,
which prevents the ink from drying. After installing the ink cartridges, be sure to turn the power off using
the power switch when you are not using the product. Do not pull out the power plug or trip the breaker
while the power is on.
❏ Keep ink cartridges out of the reach of children.
❏ A cool and dark place is recommended to store ink cartridges.
❏ If the ink cartridge is stored in a cold place for a long period of time, let it warm up at least 3 hours before
using it.
❏ If moving or transporting the product after the ink cartridges are installed, leave them installed during the
moving or transporting process.
About Illustrations in this Manual
Unless otherwise specified, this manual gives explanations using illustrations of the TM-J7700.