Service manual

.
(-
,:.,
.
REV.-A
1.4.2 Buttons
[PAUSEI
Selects printing or pause alternately when there is some data to print in the input buffer.
Advances continuous paper to tear-off position when the printer has printed all received data and is ready
to receive more print data.
[PAPER FEEDI
Advances the paper line by line using the current line spacing setting while the printer is ready to print or
paused by PAUSE button.
Holding down the button for about 1 second, it advances the paper to the next top-of-form
(TOF) position.
*
Loads continuous paper inserted in the push tractor or cut sheets in the CSF when the printer has detected
‘“’
a paper out.
[FONT]
Selects NLQ Roman, NLQ Saris serif, Draft, and condensed of those 3 fonts in rotation:
(Draft ~Draft cond.~
Roman~
Roman cond.~
Sans.~ Saris. cond.~
Draft ~Draft cond. ....)
(The factory setting k the Draft, uncondensed font)
The selection is executed when the button is released.
The selection is stored in non-volatile memory.
Enables the micro feed function when pressed along the PAUSE or PAPER FEED button. The micro
feed function is described below.
FONTI+[PAUSEI or IFONTI+[PAPER FEEDI
. . . .
~.
Activates the function.
as described below:
[FONT]+ [PAUSE]
: . . .
. .
The PAUSE and PAPER FEED buttons micro-adjust the paper position up or down,
1-18