Service manual

REV.-A
3.2.4 Removing the HOUSING ASSEMBLY, UPPER
f
“.:?.
[STEP 11
Remove the PAPER GUIDE ASSEMBLY, top cover, front cover, paper eject cover and tractor unit.
(See Section 3.2.1.)
[STEP 21
Remove the PANEL UNIT. (See Section 3.2.2.)
[STEp 31
Remove the three CBC (M4X15) screws securing the HOUSING ASSEMBLY, UppER. (There are
only two screws in the 80-column printer.)
[STEP 41
Push the two hooks through the cutouts located on the front cover to disengage the hooks from
the plates. Lift up the front side of the HOUSING ASSEMBLY, UPPER.
[STEP 51
Remove the HOUSING ASSEMBLY, UPPER.
HOUSING ASSEMBLY, UPPER
CBC (M4X15)
.
cut
-.
f ~~Šˆ
. . . . . . .
Figure 3-6. Removing the HOUSING ASSEMBLY, UPPER
Note: The figure above shows the 136-column printer.
3-8