Service manual

REV.-A
3.2.6 Removing the BOARD ASSEMBLY, C094 MAIN
[STEP 1]
[STEP 21
[STEP 31
[STEP 41
[STEp 51
[STEP 61
[STEp 71
[STEP 81
[STEP 9]
Remove the PAPER GUIDE ASSEMBLY, top cover, front cover, paper eject cover, and tractor unit.
(See Section 3.2.1.)
Remove the PANEL UNIT. (See Section 3.2.2.)
Remove the HOUSING ASSEMBLY, UPPER. (See Section 3.2.4.)
Remove the PRINTER MECHANISM. (See Section 3.2.5.)
Disconnect the cable from connector CN2 on the BOARD ASSEMBLY,
C076 PSB/pSE.
Remove SUPPORT, l/F from the BOARD ASSEMBLY, C094 MAIN.
Remove the two CBS
(M3X12) screws securin9 the cover for the oPtional interface card”
Remove the CBC (M3X8)screwandthe five CBB (M3X12) screws securing the BOARD ASSEMBLY,
C094 MAIN. Remove the GROUNDING PMTE, I/F.
Remove the BOARD ASSEMBLY,
C094 MAIN.
SUPPORT l/F
\.
CBB (M3X12)
@
)
7!
CBC (M3X8)
/
/
/
GROUNDING
AI
PLATE, l/F
,“
Card
Figure 3-25. Removing the BOARD ASSEMBLY,
C094 MAIN
3-23