Service manual

General Description
EPL&6001ActionLaser 1600 Service Manual
Buttons
■ ON LINE
■ Manual
(ON LINE + ALT)
■ ITEM
■ Paper Size
(ITEM+ ALT)
■ MENU
■ Tray Select
(MENU+ ALT)
■ ALT
■ ’r
■ ~ (~+ ALT)
■ ENTER
■ FORM FEED
■ CONTINUE
■ RESET
(CONTINUE + ALT)
Switches the printer between on-line and off-line mode. While in
SelecType mode, this button exits SelecType mode.
Enters directly (short cut) to manual feed; this setting is the same as
the manual setting in the PRINTING MENU of SelecType.
Enters SelecType mode.
Changes the item in
SelecType mode.
Enters directly (short cut) to the paper size setting of the standard
and optional paper tray in PRINTING MENU of SelecType.
Enters SelecType mode.
Changes the menu @ SelecType mcde.
Enters directly (short cut) to the paper tray select setting in
CONFIG MENU of SelecType.
Modifies the function of other buttons.
Changes to the next available option of SelecType.
Changes to the previous available option of SelecType.
Sets available option of SelecType.
When the printer is offline and the Form Feed light is lit, pressing
this button prints out data in the printer’s memory.
Pressing this button when the Continue light is flashing clears an
error.
Enter to reset operation; LCD displays “RESET”, printing stops, and
the input buffer of current interface is cleared.
If the RESET button is depressed continuously after “RESET” is
displayed, the message displayed on the LCD changes to “RESET
ALL” (about 5 seconds), and the printer enters to WARM BOOT
operation; printer clears all RAM.
1-20
Rev. A