Service manual

,/--
\,
EPf.-56OO /ActionLaser 1600 SeWbe Manuai
Disassambiy and Assambiy
3.2.2.2 Rear Frame Removal
1.
2.
3.
4.
5.
6.
7.
8.
Remove thevideocontroller board (C125 MAIN board). (Refer to Section 3.2.l.l.)
Open the top cover.
Remove the imaging cartridge. Cover the imaging cartridge to protect it
from light or place it in a dark area.
Remove the control panel. (Refer to Section 3.2.l.3.)
Remove the paper cover.
Remove the right cover and left cover. (Refkr to Section 3.2.2.l.)
Remove the top cover.
Remove 6 CP(0) screws (M3 x 6) and lift the rear frame.
Discomect connector CN1 on the power supply board (PWB-E) and connector CN2 on the
high-voltage supply board (PWB-F)T
-
-
-
PWB-E Board
CP(0) (M3 x 6)
Figure 3-9. Removing the Rear Frame
Rev. A
3-7