Owner's manual

3. In the “Options” menu, press ESC. Select “Reset.”
Caution:
Once you select “Reset," you must wait for the “Reset has been
completed” message to appear before turning off the printer.
Set Queue Polling Time Interval
Use this command to change the interval at which the parallel
port(s) check queues for waiting print jobs. To reduce network
traffic, you can increase the polling interval from the default (5
seconds) to up to 30 seconds.
1. Select “Set Queue Polling Time Interval” from “Print Server
Configuration Options.”
2. Enter a value, in seconds, from 1 to 30.
3. In the “Options” menu, press ESC.
4. Select “Reset” to implement your changes.
Caution:
Once you select “Reset," you must wait for the “Reset has been
completed” message to appear before turning off the printer,
Reset Print Server
Select “Reset Print Server” from “Print Server Configuration
Options” or, if you have made changes to the print server’s
configuration, press ESC in “Print Server Configuration Options.”
You are prompted to reset the print server, continue without
resetting, or discard all changes (without resetting).
The Ethernet Card must be reset (rebooted) after:
2-6 Changing the Configuration