Service manual

3.2.3 PWB-E Board (Power Supply Board) Removal
1. Remove the outer covers. (Refer to Section 3.2.1.)
2. Disconnect 5 connectors ( NC 1 to CN5) on the electrical board.
3. Remove 6 CCS screws (3X 6) from the PWB-E Board.
4. Remove the PWB-E Board.
PWB-E Board
CCS Screws (3X8)
Front Side
Figure 3-7. PWB-E Board Removal
PWB-E Board
Front side
PWB-A Board
C207 MAIN Board
High Voltage Supply Board
Figure 3-6. Unit Location (1)
EPL-N2000 Service Manual Disassembly and Assembly
Rev. A 3-11