Service manual

3.2.5 Rear Panel Removal
1. Remove the outer covers. (Refer to Section 3.2.1.)
2. Remove the C207 MAIN Board. (Refer to Section 3.2.4 .)
3. Remove the 6 CCS screws (3X6) securing the rear panel.
4. Lift up the Rear Panel to release 2 hooks, then remove the panel. Be sure to disconnect the fan
connector from the High Voltage Supply (PWB-F) Board Unit.
Rear Panel
CCS Screw (3X6)
Fan Connector
PWB-E Board
CN2
Rear Side
CCS Screw (3X6)
3-10. Rear Panel Removal
EPL-N2000 Service Manual Disassembly and Assembly
Rev. A 3-13