Service manual

3.2.8 Printhead Unit Removal
3.2.8.1 Harness Cover Removal
1. Remove the outer covers. (Refer to Section 3.2.1.)
2. Remove 2 CCS screws (3X8) securing the harness cover.
Printhead Unit
Front Side
Figure 3-13. Printhead Unit Location
Harness Cover
CCS Screw (3X8)
Printhead Unit
Figure 3-14. Harness Cover Removal
Disassembly and Assembly EPL-N2000 Service Manual
3-16 Rev. A