Service manual

3.2.13 PWB-A Board Unit Removal
Refer to Figure 3-6.
1. Remove the outer covers. (Refer to Section 3.2.1.)
2. Remove the Fusing Unit. (Refer to Section 3.2.2 .)
3. Remove the C207 MAIN Board. (Refer to Section 3.2.4.)
4. Remove 2 CCS screws (3X6) securing the PWB-A Board Unit.
5. Remove the PWB-A Board Unit.
Assembly Note
When assembling the PWB-A Board Unit, be suer to adjust it to the slots in the Drive Unit.
Drive Unit
PWB-A Board
Front Side
Right Side
CCS Screw (3X6)
CCS Screw (3X6)
Figure 3-23. PWB-A Board Unit Removal
Disassembly and Assembly EPL-N2000 Service Manual
3-24 Rev. A