Service manual

3.2.19 Thermistor Removal
Refer to Figure 3-29.
1. Remove the outer covers. (Refer to Section 3.2.1.)
2. Remove the Fusing Unit. (Refer to Section 3.2.2 .)
3. Remove the Heater Lamp. (Refer to Section 3.2.15.)
4. Remove the Lower Fusing Roller. (Refer to Section 3.2.17.)
5. Remove 2 shoulder screws securing the front fusing cover.
6. Remove the front fusing cover.
7. Remove CPS screw (3X10) securing the thermistor.
8. Remove the thermistor.
Shoulder Screw
Front Fusing Cover
Thermistor
CPS Scrw (3X10)
Shoulder Screw
Rear Side
Figure 3-34. Thermistor Removal
EPL-N2000 Service Manual Disassembly and Assembly
Rev. A 3-33