Service manual

3.2.20 Thermostat Removal
Refer to Figure 3-29.
1. Remove the outer covers. (Refer to Section 3.2.1.)
2. Remove the Fusing Unit. (Refer to Section 3.2.2 .)
3. Remove the Heater Lamp. (Refer to Section 3.2.15.)
4. Remove the Lower Fusing Roller. (Refer to Section 3.2.17.)
5. Remove the front fusing cover. (Refer to Section 3.2.19.)
6. Remove 2 CB(S-P1) screws (3X6) securing the thermostat.
7 Remove the thermostat.
Thermostat
Front Fusing Cover
CB(S)(P1) Screw (3X6)
Rear Side
Figure 3-35. Thermostat Removal
Disassembly and Assembly EPL-N2000 Service Manual
3-34 Rev. A