Service manual

3.2.22 Main Motor Removal

1. Remove the Drive Unit. (Refer to Section 3.2.15.)

2. Remove 3 CCB screws (3X8) securing the frame inside the Drive Unit.

3. Remove 2 CCS screws (3X6) securing the right frame outside the Drive Unit.

4. Remove the frames.

5. Remove 4 CCS screws (3X6) securing the main motor inside the Drive Unit.

6. Remove the main motor.

Drive Unit

(Inside)

Frame

CCB Screw (3X8)

Front Side

Figure 3-37. Main Motor Removal (1)

Drive Unit

(outside)

Right Frame

CCS Screw (3X6)

Front Side

CCS Screw (3X6)

Figure 3-38. Main Motor Removal (2)

Disassembly and Assembly EPL-N2000 Service Manual

3-36 Rev. A