Service manual

(4) SelecType Mode LED (Green Light)
The printer is in the SelecType mode when this light is ON.
(5) Continue LED (Yellow Light)
When this light is ON, it indicates an error has occurred that can be cleared by pressing the
Continue button.
(6) DATA LED (Yellow Light)
ON: Indicates received data is stored in the printer and has not been printed out. The
light, however, remains OFF if the stored data is not valid print data, but other
data, such as control codes and commands. The light does not go OFF until data
for remaining commands has been received.
OFF: There is no valid print data in printer memory.
Flashing: The printer is processing data.
(7) On Line LED (Green Light)
Describes whether or not the printer is ready.
ON: The printer is ready to receive data.
OFF: The printer is ready to receive data, but not to print yet.
(8) Menu
SelecType Mode:
Press this button to enter SelecType Mode. Each press scrolls through the menus
available for SelecType mode. To scroll back to the previous menu, press the
SelecType/Alt button while holding down Menu button.
One Touch Mode:
Used to select one of the settings available for the menu indicated above the
button. Press the SelecType/Alt button while holding down the Menu button.
(9) Item
SelecType Mode:
Used to choose an item in the menu selected. Press repeatedly until the item to be
selected is indicated on LCD. To scroll back to the previous menu, press the
SelecType/Alt button while holding down the Menu button.
One Touch Mode:
Used to select a setting available for the menu indicated above this button. To
scroll back to the previous menu, press the SelecType/Alt button while holding
down the Menu button.
(10) Value
Used to shift to the item where the latest selection was made.
SelecType Mode:
Used to shift to the item changed by the previous setting and select a value
(parameter). Press repeatedly until the value to be selected is indicated on the LCD.
Press the SelecType/Alt and Value buttons simultaneously to scroll back the
items.
One Touch Mode:
Used to select a setting available for the menu indicated above this button. Press
the SelecType/Alt and Value buttons simultaneously to scroll back the options.
(11) Enter
Used to enter Status Sheet Printing mode.
SelecType Mode:
Pressed to confirm a new value or start executing a selected mode.
One Touch Mode:
Pressed to confirm a new setting.
Product Description EPL-N2000 Service Manual
1-28 Rev. A