Service manual

Table 1-21. Error Messages (Continued)
Error Messages and Descriptions
Write Error SIMM
Status
This error can be caused by any of 3 situations described below:
1. No data can be written onto the SIMM.
2. Writing is not completed properly.
3. The SIMM is not inserted.
LED
On Line
OFF
Continue
OFF
Form Feed
Keeps the same status as before.
Measure
1. Turn the printer off and remove the card. Then turn the printer back on.
2. Remove the IC card with the printer on to make the Continue LED flash.
Then press the Continue button while the Continue LED is flashing. The
printer automatically returns to normal status.
3. Perform a Warm boot.
Change Card Battery
Status
Backup battery life on the PCMCIA card has ended.
LED
On Line
OFF
Continue
OFF
Form Feed
Keeps the same status as before.
Measure
Turn off the printer and remove the card to replace the battery. Then reinsert the
card. This error occurs in all the memory cards, such as SRAM cards, which
have a backup battery installed.
EPL-N2000 Service Manual Product Description
Rev. A 1-45