Service manual

Table 1-22. Warning Messages (Continued)
Warning Messages and Descriptions (Continued)
Format Error Card
Status
Data can be written onto the card inserted, but the card hasn’t been formatted.
This message can be ignored when the card is new. If the card, however, has
already data stored, the card is under either of following conditions:
1. Data wasn’t written properly.
2. The memory stored is damaged.
In such cases, write data again or turn off the printer to remove the card.
LED
On Line, Continue, Form Feed
Keeps the same status as before.
Measure
1. Clear the message by pressing Continue switch.
2. Turn off the printer and remove the card.
Format Error SIMM
Status
Data can be written onto the SIMM installed, but the SIMM hasn’t been
formatted. This message can be ignored when the SIMM is new. If the SIMM,
however, has already data stored, the SIMM is under either of following
conditions:
1. Data wasn’t written properly.
2. The memory stored is damaged.
In such cases, write data again or turn off the printer to remove the card.
LED
On Line, Continue, Form Feed
Keeps the same status as before.
Measure
1. Clear the message by pressing Continue switch.
2. Turn off the printer and remove the SIMM.
Product Description EPL-N2000 Service Manual
1-48 Rev. A